Sencor SRC 330 GN Manual de Usario

Sencor Radio SRC 330 GN

Lee a continuación 📖 el manual en español para Sencor SRC 330 GN (8 páginas) en la categoría Radio. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
SRC 330
USER’S MANUAL
NÁVOD K OBSLUZE
NÁVOD NA OBSLUHU
FELHASZNÁLÓI KÉZIKÖNYV
INSTRUKCJA OBS UGIŁ
Radioclock with alarm and inner temperature
Radiobudík s pokojovým teplom remě
Rádiobudík s izbovým teplomerom
Rádiós ébreszt szobai h mér velő ő ő
Radiobudzik z termometrem pokojowym
EN - 1
FUNCTION AND CONTROLS
1. MEMORY.SET / MEMORY+ / DISPLAY LIGHT AUTO ON/OFF / NAP
2. ALARM 1 ON / OFF SET
3. ALARM 2 ON / OFF SET
4. SNOOZE / SLEEP / DIMMER
5. CLK.ADJ. (TIME SET) / TEMP
6. << / TUNE - / YEAR/MONTH/DAY
7. >> / TUNE + / DST/C-F
8. FOCUS ADJUSTMENT FOR PROJECTION UNIT
9. PROJECTION TIME 180° FLIP BUTTON
10. PROJECTION ON/OFF BUTTON
11. VOLUME UP / DISPLAY AUTO CHANGE ON/OFF
12. ON / OFF
13. VOLUME DOWN
14. DISPLAY
15. BATTERY COMPARTMENT (REAR OF UNIT)
16. RESET
17. RATING LABEL (REAR OF UNIT)
18. PROJECTION UNIT
19. SPEAKER
20. TEMPERATURE SENSOR (IN DOOR TEMPERATURE)
21. FM ANTENNA
22. AC POWER CORD
EN - 2
LED DISPLAY
POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back up system,
it requires a 3V CR2032 flat lithium battery (not included). Insert the battery in the battery compartment,
making certain that the positive and negative (+ and -) battery terminals are attached to the corresponding
terminals on the plate in the battery compartment. If an AC power failure occurs, the clock automatically
switches to the battery power supply, the clock and timer memory continue running. When the AC power
resumes, the clock switches back to AC again.
GETTING STARTED
Press the RESET button (16) locates on the back of unit after AC plug in.
- The unit will display full segment for 2 seconds, then it will enter the normal mode.
1. TIME AND CALENDAR MANUAL SETTING
A. Setting Time and Calendar – Press Time set button (5) in normal mode and keep depress over 2 seconds
to enter time set mode, after enter the setting mode, press Time set button (5) to change the mode cycle
as follows :
Normal Year Month Day 12/24 H Real time Hour Real time Min Normal → →
Action (during data adjustment):
- Press << / Tune - button (6) to adjust data backward.
- Press >> / Tune + button (7) to adjust data forward.
- Keep depress << or >> button for 2 seconds to enable auto forward.
B. Setting Alarm 1 and Alarm 2 – Press alarm set button (2/3) during normal mode and keep depress over
2 seconds to enter alarm set mode, after enter the setting mode, press alarm set button (2/3) to change
the mode cycle as follows :
Normal AL 1 Hour AL 1 Min AL 1 weekday Alarm AL 1 wake beep AL 1 wake radio AL 1 → →
wake radio volume Normal
Normal AL 2 Hour AL 2 Min AL 2 weekday Alarm AL 2 wake beep AL 2 wake radio AL 2 → →
wake radio volume Normal

Especificaciones del producto

Marca: Sencor
Categoría: Radio
Modelo: SRC 330 GN

¿Necesitas ayuda?

Si necesitas ayuda con Sencor SRC 330 GN haz una pregunta a continuación y otros usuarios te responderán




Radio Sencor Manuales

Radio Manuales

Últimos Radio Manuales