SetonixSynth Noise Complaint! Manual de Usario

SetonixSynth No categorizado Noise Complaint!

Lee a continuación 📖 el manual en español para SetonixSynth Noise Complaint! (3 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Noise Complaint! Quad Normalized Attenuator - User’s Manual for Eurorack

Hello and thank you for using the Noise Complaint! Quad Normalized Attenuator for Eurorack modular.

We hope you will find it to be good for attenuating stuff!

Technical Specifications (Intellijel 1U)

Width: 22 hp

Depth: 25 mm

Peak Current Draw: 0 mA (Passive)

1. Installing the Noise Complaint!

The Noise Complaint! consumes no power and as such does not need to be plugged into your case’s

power busboard. The module will fit in any 1U case. Simply place it in the case andIntellijel-format

mount it using either two diagonal rack screws or screws in each of the four corner holes.

2. Theory of Operation

The Noise Complaint! is a very simple module containing four passive attenuator channels. Because this

is a passive module, it is only capable of turning signals down, never of amplifying. It’s also worth noting

that this module , though it can be used as the opposite (in other words, ancan’t be used as a mixer

attenuating Multiple - see “Patch Ideas” section).

Most Eurorack output signals are relatively hot, or high-amplitude, making it a common problem that they

need “reining in” in order to most effectively modulate or control parameters which benefit from nuance,

such as filter cutoff, FM amount, envelope time, and similar. As such, the Noise Complaint! is designed

simply to provide some solid, performance-friendly knobs and switches for precisely dialing in signals.

Please note: The Noise Complaint! is an entirely passive module and will accept and output any voltage

and current up to the breaking point of its hardware, without limiting or conditioning it in any way apart

from acting as a voltage divider depending on the position of the corresponding knob. As such, it should

not be used to process signals outside the power rail voltages of any synthesizer to which it is patched as

this could potentially damage an active circuit.

3. Summary of Functions

Level A-D :(knobs) Controls the level of the corresponding input channel.

Mute A-C: Interrupts the Input of the corresponding channel and pulls the Output to 0 volts. Does not

affect the Normalization of one input channel to the next.

In A-D: Input to each Attenuator channel. If IN D is left unpatched, its jack will be normalized to IN C. IN C

is normalized to IN B, and IN B is normalized to IN A. Therefore, if only IN A is patched, this input signal

will be routed to IN B, C, and D as well.

Out A-D: Channel Outputs post-Attenuation and Mute, if applicable.

4. Patch Ideas

“Attenuating Multiple”

Patch a signal to IN A. If IN B-D are left unpatched, LEVEL B-D and MUTE B-C can be used to provide a

different level output of the signal present at IN A. The Normalization to any channel can be broken by

patching a signal to the corresponding IN, allowing for the creation of two separate two-channel

Attenuating Multiples for example.

"Meta Controller"

Patch a signal to IN A, then patch OUT A to IN B. Patch OUTs B-D to sensitive parameters in your patch

and adjust LEVELs B-D to control the “window size” of each parameter to be modulated. When LEVEL A

is adjusted, it will provide overall level control for each of the other Channel OUTs, and MUTE A can be

used to mute all other Channels.

Especificaciones del producto

Marca:	SetonixSynth
Categoría:	No categorizado
Modelo:	Noise Complaint!
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Touch
Color del producto:	Zwart
Número de niveles de potencia:	9
Temporizador:	Ja
Ancho:	380 mm
Profundidad:	520 mm
Altura:	53 mm
Bloqueo infantil:	Ja
Peso del embalaje:	8000 g
Ancho del embalaje:	600 mm
Empaquetadura en profundidad:	650 mm
Altura del embalaje:	100 mm
Tipo de material (arriba):	Glaskeramiek
Potencia quemador/zona de cocción 1:	2300 W
Número de quemadores/zonas de cocción:	1 zone(s)
tipo de placa:	Inductiekookplaat zones
Quemador/zona de cocción tipo 1:	Extra groot
Número de quemadores de gas:	0 zone(s)
Número de zonas de cocción electrónicas:	1 zone(s)
Diámetro normal del quemador/zona de cocción:	250 mm
Quemador normal/zona de cocción:	2300 W
Posición de control:	Boven voorzijde
Carga conectada (eléctrica):	3000 W
Ancho del compartimento de instalación:	350 mm
Profundidad del compartimento de instalación:	490 mm
Función de impulso:	Ja
Fuente de alimentación quemador/zona de cocción 1:	Electrisch
Posición del quemador/zona de cocción 1:	Centraal
Diámetro quemador/zona de cocción 1:	250 mm
Forma zona de cocción 1:	Rond
voltaje-de-entrada-de-CA:	220 - 230 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz