Sharp VL-WD450U Manual de Usario

Sharp Videocámara VL-WD450U

Lee a continuación 📖 el manual en español para Sharp VL-WD450U (120 páginas) en la categoría Videocámara. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/120

LIQUID CRYSTAL DISPLAY CAMCORDER

OPERATION MANUAL

MODEL

VL-WD450U

VL-WD650U

Important

Model No.:

Serial No.:

Please read this operation manual

carefully before using the VIEWCAM.

For assistance in reporting the theft or

loss of

this product, record on the line

below the

model number and serial number which

are located on the bottom of the unit.

Please retain this information.

• See page 93 for use of Demo mode.

• The images of the VIEWCAM in this

operation manual are based upon the

VL-WD450U.

Appendix

Preparation Useful Features

Operation References Basic Operations Advanced Features SmartMedia Card

Features

Thank you for purchasing this camcorder from SHARP.

The camcorder will enhance your home video enjoyment and allow you to capture those

special moments. Please read this operation manual to familiarize yourself with the

camcorder’s features, so that you will get the most out of it. The video techniques section will

help you fully enjoy the many features this camcorder oﬀers, and expand your video world.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Important Information for Consumers in the U.S.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELEC-

TRIC SHOCK, DO NOT REMOVE

COVER. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSON-

NEL.

This symbol warns the user of uninsulated voltage within the

unit that can cause dangerous electric shocks.

This symbol alerts the user that there are important operating

and maintenance instructions in the literature accompanying

this unit.

CAUTION

(applies to the supplied AC adapter)

TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

CAUTION

If the AC adapter is misplaced or

needs to be replaced, obtain the

same type of adapter from a SHARP

service center of your dealer.

BATTERY DISPOSAL

CONTAINS LITHIUM-ION RECHARGEABLE BATTERY. MUST BE RECYCLED OR

DISPOSED OF PROPERLY. CONTACT LOCAL AGENCIES FOR INFORMATION ON

RECYCLING AND DISPOSAL PLANS IN YOUR AREA.

PRODUCT DISPOSAL

This Product utilizes tin-lead solder, and a ﬂuorescent lamp containing a small

amount of mercury. Disposal of these materials may be regulated due to environ-

mental considerations. For disposal or recycling information, please contact your

local authorities or the Electronics Industries Alliance: www.eiae.org.

WARNING—FCC Regulations state that any unauthorized changes or modiﬁca-

tions to this equipment not expressly approved by the manufacturer could void the

user’s authority to operate this equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment oﬀ

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the distance between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

A shielded I/F cable is required to insure compliance with FCC regulations for Class B

computing equipment.

DECLARATION OF CONFORMITY

Sharp Camcorder

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-

ing two conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430

Phone: 1-800-BE-SHARP

CAUTION ON LITHIUM BATTERY (MEMORY BACKUP BATTERY)

If a battery is reversed (positive end where the negative end belongs and vice

versa), it can overheat and rupture. This has happened when young children install

batteries backwards. Warn children

not

to take out batteries or install them.

Parents

should install the lithium battery in the camcorder.

compliance with the copyright laws of the United States and

that prior permission be obtained from copyright owners

whenever necessary.

NOTE

The camcorder’s LCD panel is a very high technology product with more than

61,000 (VL-WD450U)/close to 90,000 (VL-WD650U) thin-ﬁlm transistors*, giving you

ﬁne picture detail. Occasionally, a pixel may appear on the screen as a ﬁxed point of

blue, green, red, or black. Please note that this does not affect your camcorder’s

performance.

*Speciﬁcations are subject to change without notice.

Trademarks

• SmartMedia is a trademark of Toshiba Corporation.

•DPOF is a trademark of CANON INC., Eastman Kodak Company, Fuji Photo Film Co., Ltd. and

Matsushita Electric Industrial Co., Ltd.

•All other brand or product names are registered trademarks or trademarks of their respective

holders.

Especificaciones del producto

Marca:	Sharp
Categoría:	Videocámara
Modelo:	VL-WD450U
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Draaiknop
Color del producto:	Roestvrijstaal
Pantalla incorporada:	Nee
Peso.:	10000 g
Ancho:	580 mm
Profundidad:	510 mm
Altura:	56 mm
Longitud del cable:	1 m
Peso del embalaje:	11000 g
Tipo de material (arriba):	Roestvrijstaal
Potencia quemador/zona de cocción 2:	3300 W
Potencia quemador/zona de cocción 3:	1700 W
Potencia quemador/zona de cocción 1:	1700 W
Número de quemadores/zonas de cocción:	4 zone(s)
tipo de placa:	Gaskookplaat
Ignición electrónica:	Ja
Quemador/zona de cocción tipo 1:	Regulier
Quemador/zona de cocción tipo 2:	Extra groot
Tipo de quemador/zona de cocción 3:	Regulier
Número de quemadores de gas:	4 zone(s)
Número de zonas de cocción electrónicas:	0 zone(s)
Quemador a fuego lento/zona de cocción:	1000 W
Quemador normal/zona de cocción:	1700 W
Posición de control:	Rechtsboven
Ancho del compartimento de instalación:	560 mm
Altura del compartimento de instalación:	43 mm
Quemador/zona de cocción grande:	3300 W
Carga conectada (gas):	7700 W
Protección del sensor de calor:	Ja
Válvula de seguridad:	Ja
Profundidad del compartimento de instalación (min):	480 mm
Número de zonas de cocción que se utilizarán simultáneamente:	4
Tipo de quemador/zona de cocción 4:	Sudderen
Potencia quemador/zona de cocción 4:	1000 W
Fuente de alimentación quemador/zona de cocción 1:	Gas
Fuente de alimentación quemador/zona de cocción 2:	Gas
Fuente de alimentación quemador/zona de cocción 3:	Gas
Fuente de alimentación del quemador/zona de cocción 4:	Gas
Profundidad del compartimento de instalación (máx.):	490 mm
Quemador de wok:	Ja
Posición del quemador wok:	Links voor
Posición del quemador/zona de cocción 1:	Links achter
Posición quemador/zona de cocción 2:	Links voor
Posición quemador/zona de cocción 3:	Rechts achter
Posición del quemador/zona de cocción 4:	Rechts voor
Forma zona de cocción 1:	Rond
Forma zona de cocción 2:	Rond
Forma zona de cocción 3:	Rond
Forma zona de cocción 4:	Rond
voltaje-de-entrada-de-CA:	220 - 240 V