Siemon VP-BLNK Manual de Usario

Lee a continuación 📖 el manual en español para Siemon VP-BLNK (1 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
To assist safe installations, comply with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals unless
the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
VPOD Blank Panel Installation Instructions
Parts Description Required Tools
Rev. A 10/08 100.17753.00
To assist safe installations, comply with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals unless
the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
Make sure both cabinets
that the Blank will be
installed between, are level and
properly bayed together using all
(4) baying brackets. See Baying
Instructions.
1Install the (4) shoulder
bolts provided onto the
inside of the VPOD Frame as
shown, using the 5/32” Allen Tool.
(2) bolts on the top and (2) bolts
on the bottom.
2Place the Blank over the (4)
shoulder bolts and hook
the back plate into place.
3
© 2008 Siemon
Global Headquarters
Watertown, Connecticut USA
Tel: (1) 866-548-5814
For a complete listing of our global offices visit our web site www.siemon.com
5/32 Allen Tool
VPOD Vertical Blank Panel
(4) Shoulder Bolts

Especificaciones del producto

Marca: Siemon
Categoría: No categorizado
Modelo: VP-BLNK

¿Necesitas ayuda?

Si necesitas ayuda con Siemon VP-BLNK haz una pregunta a continuación y otros usuarios te responderán




No categorizado Siemon Manuales

No categorizado Manuales

Últimos No categorizado Manuales