SIIG CE-H21U11-S1 Manual de Usario

SIIG repetidor wifi CE-H21U11-S1

Lee a continuación 📖 el manual en español para SIIG CE-H21U11-S1 (12 páginas) en la categoría repetidor wifi. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
1
Introduction
The HDMI Wireless Extender provides an easy way to
extend HDMI signals wirelessly up to 80 meters.
Features and Benefits
Sends video and audio from your HDMI source to
TV/display wirelessly in 1080p quality
Transmits content up to 80 meters LOS (Line of
Sight) with no latency
Supports 2.4GHz frequency with channel hopping
channel automatically changes when an
interference is detected with other RF sources
IR extender to control HDMI source device from the
remote HDMI display end
Complete kit with a Transmitter (TX) and Receiver
(RX)
HDMI output on Transmitter (TX) for a local TV/
display next to the source device
Wall mountable
LED status indicators for Power and Wireless
connection
System Requirements
PC or A/V devices with an available HDMI output port
HDMI display
04-0909A
HDMI Wireless Extender
Installation Guide
2
Package Contents
HDMI Wireless Extender (Transmitter x1, Receiver
x1)
HDMI cables (2)
Power adapters (5V/2A for Transmitter, 5V/1A for
Receiver)
IR blaster cable
Screws for wall mount (4)
Installation guide
Application
Figure 1: Application
HDMI Display
HDMI
ODD Player
HDMI Display
IR Blaster
IR Blaster
Receiver
Transmitter
Remote Control
3
Wireless LED: Red when the connection is
established; flashing when searching for signal or
disconnected
Power LED: Red when the power adapter is
connected; turns Green when powered on
Antenna: Sends the signal to the receiver
Power Button: Turns the transmitter On/ Off
Power Jack: Plug in the included 5V/2A power
adapter here
Pairing Button: Press to connect to the receiver
HDMI In: Connects to your HDMI source device
(DVD player, etc) using the included HDMI cable
HDMI Out: For local monitor; connects to your
HDMI display using an HDMI cable (cable not
included)
IR Blaster: Plug in the included IR Blaster cable
here. See IR Blaster Cable on page 4 for more
information
Layout
Transmitter
Power
Button
Power LED
Wireless LED Pairing Button
HDMI In
Antenna
Power Jack
IR Blaster HDMI Out
Figure 2: Transmitter Layout

Especificaciones del producto

Marca: SIIG
Categoría: repetidor wifi
Modelo: CE-H21U11-S1
Nivel de ruido: 36.7 dB
Amable: Alles-in-één vloeistofkoeler
Ubicación adecuada: Processor
Diámetro del ventilador: 120 mm
Zócalos de procesador compatibles: Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket FM1, Socket FM2
Velocidad del ventilador (máx.): 2200 RPM
Velocidad del ventilador (mín.): 1000 RPM
voltaje de la bomba: 12 V
Fan Dikhaid: 25 mm
Ancho del radiador: 120 mm
Profundidad del radiador: 145 mm
Altura del radiador: 79 mm

¿Necesitas ayuda?

Si necesitas ayuda con SIIG CE-H21U11-S1 haz una pregunta a continuación y otros usuarios te responderán




repetidor wifi SIIG Manuales

repetidor wifi Manuales

Últimos repetidor wifi Manuales