SilverStone SST-SDP08 Manual de Usario

Lee a continuación 📖 el manual en español para SilverStone SST-SDP08 (2 páginas) en la categoría Geheugenkaartlezer. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
SST-SDP08
3.5” to 2.5” bay converter
Special features:
Nickel-coated finish for durable appearance
Compatible with most 2.5” hard drive
Available for 3.5” drive bay
Installation guide
1. Install your 2.5” hard drive into the
extension bracket and secure with
included screws as shown.
1. Setzen Sie die 2,5 Zoll-Festplatte
in das Slotblech ein und fixieren
Sie sie mit den mitgelief erten
Schrauben (s. Abb.).
1. Installare l’hard disk da 2,5” nella
sede preposta, ed assicurarlo al
supporto per mezzo delle viti in
dotazione.
1. Установите ваш 2,5-дюймовый
жесткий диск в переходной
кронштейн и закрепите прилагаемыми
шурупами, как показано на рисунке.
1. 2.5” 䚌☐ ☐⢰㢨⽀ 䞉㣙
GGG⢰䁇 䚐䟸 ┍, ㇠⦐
GGG⫰Ḱ ᵍ㢨 Ḕ㥉䇩⏼.
1.ā
ߦ߼ǃߩ
߁ߦҬߩߢߒ߹ߔDŽ
1.ᇛᙼⱘয়⹀⹳㺱ܹ䔝᦯
ᶊЁϺձ೪⼎ҹܻ䰘㶎㍆
䥪೎DŽ
1.ᇚᙼⱘয়⹀Ⲭ㺙ܹ䕀ᤶ
ᶊЁᑊձ೒⼎ҹݙ䰘㶎ϱ
䫕೎DŽ
1. Instale su disco duro de 2,5” en el
bracket de expansn y asegúrelo
con los tornillos que se incluyen
como se muestra.
1. Installez votre disque dur 2.5” dans le
casier d’extension et fixez-le avec les
vis incluses comme montré.
ㅔԧЁ᭛
ㅔԧЁ᭛
ㅔԧЁ᭛
ㅔԧЁ᭛
ㅔԧЁ᭛
NO:G11209670
Specifications:
2.ᢵ޿ߡ޿ā
ݙߦ߼߹ߔDŽ
߇޽ࠇ߫Ҭሲߩ
ߢߒ߹ߔDŽ
2.ᇛ䔝᦯ܹぎⱘয়
㺱㕂ῑˈϺձ䳔∖ҹܻ䰘㶎
㍆䥪೎DŽ
2.ᇚ䕀ᤶܹぎⱘয়
㺙㕂ῑˈᑊձ䳔∖ҹݙ䰘㶎
ϱ䫕೎DŽ
2. Insert the extension bracket into an
empty 3.5” internal drive bay. Use the
included screws to secure the bracket
if necessary
2. Setzen Sie das Slotblech in einen
leeren internen Laufwerksschacht
(3,5 Zoll) . Schrauben Sie das Slotblech
bei Bedarf mit den mitgelieferten
Schrauben fest.
2. Inserire quindi quanto ottenuto in
un bay interno da 3,5. Se necessario,
utilizzare le viti in dotazione per
assicurarlo allo chassis.
2. Вставьте переходной кронштейн в
пустой внутренний 3,5юймовый
отсек. При необходимости закрепите
кронштейн прилагаемыми шурупами.
2. ⽀⢰ 3.5” ⇨⺴
GGGⷔ㢨㜄 䙸㟈䚌␘⮨ ㉘㾌 䚝⏼␘.
GGG┍⸽═ ⇌㇠⦐ ⽀⢰䁇㡸
GGGḔ㥉㐐䇩⏼␘.
2. Inserte el bracket de expansión en un
espacio interno vacío de 3,5”. Use los
tornillos que se incluyen para asegurar
el bracket si es necesario.
2. Insérez le casier d’extension dans une
baie interne pour lecteur 3.5” vide.
Utilisez les vis incluses pour fixer le
casier adaptateur si nécessaire
ㅔԧЁ᭛
ㅔԧЁ᭛
ㅔԧЁ᭛
ㅔԧЁ᭛
ㅔԧЁ᭛
Model
Color
Material
Application
Capacity
Overall Dimension
weight
SST-SDP08
Nickel-coated
1.0 mm SPCC with Nickel plating
3.5”drive internal bay
2 x 2.5" hard drives
101.6 mm (W) x 25.4mm (H) x 146mm (D)
160g
February, 2009

Especificaciones del producto

Marca: SilverStone
Categoría: Geheugenkaartlezer
Modelo: SST-SDP08

¿Necesitas ayuda?

Si necesitas ayuda con SilverStone SST-SDP08 haz una pregunta a continuación y otros usuarios te responderán