Singer 5400 Manual de Usario

Singer máquina de coser 5400

Lee a continuación 📖 el manual en español para Singer 5400 (73 páginas) en la categoría máquina de coser. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/73

INSTRUCTION MANUAL

MANUEL D’INSTRUCTION

MANUAL DE INSTRUCCIONES

5500/5400

6199/6180/6160

Eng 1

This household sewing machine is designed to comply with

IEC/EN 60335-2-28 and UL1594.

When using an electrical appliance, basic safety precautions

should always be followed, including the following:

Read all instructions before using this household sewing

machine. Keep the instructions in a suitable place close to

the machine. Make sure to hand them over if the machine is

given to a third party.

• A sewing machine should never be left unattended when

plugged in. Always unplug this sewing machine from the

electric outlet immediately after using and before cleaning,

removing covers, lubricating or when making any other

user servicing adjustments mentioned in the instruction

manual.

To reduce the risk of electric shock:

To reduce the risk of burns, fire,

electric shock, or injury to person:

IMPORTANT SAFETY INSTRUCTIONS

DANGER –

WARNING –

• Do not allow to be used as a toy. Close attention is

necessary when this sewing machine is used by or near

children.

• Use this sewing machine only for its intended use

as described in this manual. Use only attachments

recommended by the manufacturer as contained in this

manual.

• Never operate this sewing machine if it has a damaged

cord or plug, if it is not working properly, if it has been

dropped or damaged, or dropped into water. Return the

sewing machine to the nearest authorized dealer or service

center for examination, repair, electrical or mechanical

adjustment.

• Never operate the sewing machine with any air openings

blocked. Keep ventilation openings of the sewing machine

and foot control free from the accumulation of lint, dust,

and loose cloth.

• Keep fingers away from all moving parts. Special care is

required around the sewing machine needle.

• Always use the proper needle plate. The wrong plate can

cause the needle to break.

• Do not use bent needles.

• Do not pull or push fabric while stitching. It may deect the

needle causing it to break.

• Wear safety glasses.

• Switch the sewing machine off (“0”) when making any

adjustment in the needle area, such as threading needle,

changing needle, threading bobbin, or changing presser

foot, etc.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being

used or where oxygen is being administrated.

• To disconnect, turn all controls to the off (“0”) position, then

remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

• The foot control is used to operate the machine. Avoid

placing other objects on the foot control.

• Do not use the machine if it is wet.

• If the LED lamp is damaged or broken, it must be replaced

by the manufacturer or its service agent or a similarly

qualied person, in order to avoid a hazard.

• If the supply cord connected with the foot control is

damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualified person, in order to

avoid a hazard.

• This sewing machine is provided with double insulation.

Use only identical replacement parts. See instructions for

Servicing of Double-Insulated Appliances.

Eng 2

SAVE THESE INSTRUCTIONS

Especificaciones del producto

Marca:	Singer
Categoría:	máquina de coser
Modelo:	5400
Color del producto:	Zwart
Peso.:	1560 g
Ancho:	140 mm
Profundidad:	150 mm
Altura:	86 mm
Nivel de ruido:	- dB
Peso del embalaje:	2283 g
Ancho del embalaje:	266 mm
Empaquetadura en profundidad:	194 mm
Altura del embalaje:	112 mm
Actual:	8 A
Interruptor encendido / apagado:	Ja
Certificación:	TUV-RH, CE, CCC, KC, EAC, RCM, cTUVus, FCC, BSMI, ErP 2013 Lot 6
Destinado a:	PC
numero de fans:	1 ventilator(en)
Protección de voltaje de energía:	Over current, Over power, Over voltage, Overheating, Short circuit
Certificación 80 PLUS:	80 PLUS Bronze
Tiempo medio entre fallos (MTBF):	100000 uur
Los activos totales:	500 W
Tipo de enfriamiento:	Actief
Eficiencia:	85 procent
Altura del paquete principal (exterior):	217 mm
Ancho del embalaje principal (exterior):	582 mm
Longitud del paquete principal (exterior):	279 mm
Cantidad por caja principal (exterior):	5 stuk(s)
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Temperatura de funcionamiento (TT):	0 - 40 °C
Número de paquetes principales (exteriores) por palet:	24 stuk(s)
Diámetro del ventilador:	120 mm
Conexión para unidad de disquete:	Ja
Factores de forma de placa base compatibles:	ATX
Conector de alimentación de la placa base:	20+4 pin ATX
Conectores de alimentación de periféricos (Molex) (4 pines):	3
Factor de forma de fuente de alimentación (PSU):	ATX
Tecnología de rodamientos:	LDB
Tipo de corrección del factor de potencia (PFC):	Actief
Potencia combinada (+3,3V):	110 W
Potencia combinada (+12V):	460 W
Potencia combinada (+5V):	110 W
Salida máxima de audio (+3,3 V):	18 A
Salida de corriente máxima (+12 V):	38.3 A
Salida máxima de audio (+5V):	18 A
Salida de corriente máxima (-12V):	0.3 A
Salida de corriente máxima (+5Vsb):	3 A
Potencia combinada (-12V):	3.6 W
Potencia combinada(+5Vsb):	15 W
Número de conectores de alimentación SATA:	4
Conector de alimentación de la unidad de disquete:	1
Versión ATX:	2.31
Hora de espera:	16 ms
Conectores de alimentación PCI Express (6+2 pines):	1
Conector de alimentación de la CPU (4+4 pines):	Ja
Longitud del cable de alimentación SATA:	450,570 mm
Longitud del cable de alimentación de la placa base:	610 mm
Longitud del cable de alimentación PCI Express:	700 mm
Longitud del cable de alimentación de la CPU:	600 mm
Rango de retardo Potencia Buena señal:	100 - 500 ms
Longitud del cable de alimentación periférico (Molex):	450,570,690,810 mm