Singer C5635 Manual de Usario

Singer máquina de coser C5635

Lee a continuación 📖 el manual en español para Singer C5635 (40 páginas) en la categoría máquina de coser. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/40

INSTRUCTION MANUAL

C5600 / C5605 / C5630 / C5635

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this household sewing machine.

When using an electrical appliance, basic safety precautions should always be followed, including the

following:

Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the machine is

given to a third party.

This appliance is intended for use by adults. The appliance can be used with adult supervision by (i) children

aged from 8 to 12 years and (ii) persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given instruction concerning use of the appliance in a safe way

and understand the hazards involved. Cleaning and user maintenance shall not be made by children without

supervision. It is not allowed for anyone to play with the machine. Children up to 8 years are not allowed to use

the machine.

WARNING – TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC

SHOCK, OR INJURY TO PERSON:

• A sewing machine should never be left unattended when plugged in. The electrical socket, to which the

machine is plugged in should be easily accessible. Always unplug this sewing machine from the electric

outlet immediately after using and before cleaning, removing covers, lubricating or when making any other

user servicing adjustments mentioned in the instruction manual.

• Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near

children.

• Use this sewing machine only for its intended use as described in this manual. Use only attachments

recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer

or service center for examination, repair, electrical or mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing

machine and foot control free from the accumulation of lint, dust, and loose cloth.

• Keep ngers away from all moving parts. Special care is required around the sewing machine needle.

• Always use the proper needle plate. The wrong plate can cause the needle to break.

• Do not use bent needles.

• Do not pull or push fabric while stitching. It may deect the needle causing it to break.

• Wear safety glasses.

• Switch the sewing machine o (“0”) when making any adjustment in the needle area, such as threading

needle, changing needle, threading bobbin, or changing presser foot, etc.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administrated.

• To disconnect, turn all controls to the o (“0”) position, then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• The foot control is used to operate the machine. Never place other objects on the foot control.

• Do not use the machine if it is wet.

• If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a

similarly qualied person, in order to avoid a hazard.

• If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or its service

agent or a similarly qualied person, in order to avoid a hazard.

• The machine must only be used with foot control of type JF-1000 manufactured by Jaguar International

Corporation or YC-485EC manufactured by Taiwan Yamamoto Electric Corp.

SAVE THESE INSTRUCTIONS

SERVICING OF DOUBLE INSULATED PRODUCTS

In a double-insulated product, two systems of insulation are provided instead of grounding. No ground means

is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing

of a double-insulated product requires extreme care and knowledge of the system and should be done only by

qualied service personnel. Replacement parts for a double-insulated product must be identical to those parts

in the product. A double-insulated product is marked with the words ‘DOUBLE INSULATION’ or ‘DOUBLE

INSULATED’.

Especificaciones del producto

Marca:	Singer
Categoría:	máquina de coser
Modelo:	C5635
Color del producto:	Zwart
Peso.:	1200 g
Ancho:	145 mm
Profundidad:	194.1 mm
Altura:	110 mm
Peso del embalaje:	1200 g
Ancho del embalaje:	179 mm
Empaquetadura en profundidad:	253 mm
Altura del embalaje:	123 mm
Indicadores LED:	Activity, Power
Cables suministrados:	SATA
Certificados de sostenibilidad:	RoHS
Temperatura de almacenamiento:	-20 - 60 °C
numero de fans:	1 ventilator(en)
Interno:	Nee
Unidades de almacenamiento instaladas:	Nee
Unidad de almacenamiento instalada:	Nee
Capacidad total de almacenamiento instalada:	0 TB
Capacidad máxima de almacenamiento admitida:	12 TB
Interfaz de disco de almacenamiento:	Serial ATA, Serial ATA II, Serial ATA III
Tamaño del disco de almacenamiento:	3.5 "
Altura del paquete principal (exterior):	290 mm
Ancho del embalaje principal (exterior):	386 mm
Longitud del paquete principal (exterior):	523 mm
Cantidad por caja principal (exterior):	8 stuk(s)
Ratio de transferencia:	6 Gbit/s
Número de unidades de almacenamiento admitidas:	3
Temperatura de funcionamiento (TT):	0 - 55 °C
Humedad relativa de funcionamiento (VV):	5 - 85 procent
Código del Sistema Armonizado (SA):	84717020
Bahías de unidades de intercambio en caliente:	Ja
Tipos de unidades de almacenamiento compatibles:	HDD
Número de conectores de alimentación SATA:	2
Puertos de host:	3
Placas posteriores compatibles:	Ja
Puerto de host SATA:	Ja
Tipo de conector de alimentación SATA:	SATA 15-pin