SkyRC BD250 Manual de Usario

SkyRC cargador de bateria BD250

Lee a continuación 📖 el manual en español para SkyRC BD250 (4 páginas) en la categoría cargador de bateria. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

1. Connect battery to BD250

INTRODUCTION

OPERATION

-1- -2-

INSTRUCTION MANUAL

SK-600133

BATTERY DISCHARGER & ANALYZER

FEATURES

It displays real time battery voltage, discharged capacity and discharge current.

It can test battery capacity that helps select batteries with desired capacity.

It saves time when user wishes to store their large capacity batteries.

It helps activate the best performance of your batteries for competition.

Thank you for choosing the SkyRC Battery Discharger & Analyzer (BD250). The BD250 is a powerful

discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also

measures and compares the performance of batteries. BD250 allows for the precise measurement of battery

capacity and takes the guesswork out of choosing the best battery for your application.

The BD250 is much more than a simple battery discharger or a battery load tester. It will test virtually any

type or size of battery, any chemistry or number of cells, up to 35 volts.

The BD250 is ruggedly built and uses XT60 connector for battery connection. It is small with a high performance

cooling system. Digital LED indicates battery voltage, discharged capacity and discharge current.

2. Power ON

Press the dial once to

power ON the discharger,

the LED(V/mAh) will

blink with beep sound.

3. Select cut-off voltage and discharge current

By rotating the dial to change cut-off voltage, then press dial once to confirm.

By rotating the dial to change discharge current.

V / mAh V / mAh

A A

4. Start discharging process.

Press and hold dial for 2 seconds, the discharger will start with

beep sound.

During the discharging process, the digital LED(V/mAh) will

alternate the display of battery voltage and discharging capacity.

V / mAh V / mAh

6. Process finished.

When the discharging process has finished, the discharger will beep 5 times, and the LED(V/mAh)

will show battery voltage and discharge capacity respectively.

Digital LED(V/mAh)

Battery Voltage

/ Capacity Display

Digital LED(A)

Current Display

Rotary Dial

for Setting Cutoff Voltage

Discharging Current

Start Stop Button/

Temperature Controlled

Cooling Fan

XT60 Battery

Port

Data Link

Heat Sink

The LED(V/mAh) shows the current battery voltage.

Current Display Accuracy:

Voltage Display Accuracy:

Dimension:

Weight:

0.01-10.00A ±60mA

10.00-35.00A ±3%

5.4-10V ±80mV

10-20V ±120mV

20-35V ±160mV

136.6x104.8x107mm

879g

SPECIFICATION

Accepted Voltage Range: 5.40-35.00V

Low Voltage Alert: <5.2V

High Voltage Alert: >35V

Max. Discharge Power: 250W

Discharge Current Range: 0.01A-35.00A

Current Consumption in Sleep Mode: <100uA

Capacity Display Accuracy: 3%±

5. Stop discharging process.

During the discharging process, Press the dial once to stop the

discharging process, the digital LED(A) shows “Stop”.

NOTE:

After the discharge process completes, rotate the button to view the real-time battery voltage every

30 seconds for the first six minutes.

At certain intervals, the slower the voltage reduces during discharge, the better the battery

performances.

This feature can help to select good-performance battery for your race or flight.

If the discharger can't be powered on, the fuse

may be burnt.

You can replace the fuse by yourself and there

is one piece of replacement in the package. The specification is

40A/32V blade fuse.

HOW TO REPLACE THE FUSE

-3- -4-

WARRANTYAND SERVICE

We guarantee this product to be free of manufacturing and assembly defects for a period of one year from the time of purchase.

The warranty only applies to material or operational defects, which are present at the time of purchase. During that period, we will

repair or replace free of service charge for products deemed defective due to those causes.

This warranty is not valid for any damage or subsequent damage arising as a result of misuse, modification or as a result of failure to

observe the procedures outlined in this manual.

The warranty service is valid in China only.

If you need warranty service overseas, please contact your dealer in the first instance, who is responsible for processing

guarantee claims overseas. Due to high shipping cost, complicated custom clearance procedures to send back to China.

Please understand SkyRC can't provide warranty service to overseas end user directly.

If you have any questions which are not mentioned in the manual, please feel free to send email to info@skyrc.cn

Note:

RoHS

Manufactured by

SKYRC TECHNOLOGY CO LTD  ., .

www skyrc com. . 7504-1290-01

LiPo

LiHV

NiMH

10S

11S

12S

13S

14S

15S

16S

17S

18S

19S

20S

6.0

9.0

12.0

15.0

18.0

21.0

24.0

6.2

9.3

12.4

15.5

18.6

21.7

24.8

5.4

6.3

7.2

8.1

9.0

9.9

10.8

11.7

12.6

13.5

14.4

15.3

16.2

17.1

18.0

8.40

12.60

16.80

21.00

25.20

29.40

33.60

8.70

13.05

17.40

21.75

26.10

30.45

34.80

9.00

10.50

12.00

13.50

15.00

16.50

18.00

19.50

21.00

22.50

24.00

25.50

27.00

28.50

30.00

35.00

27.77

20.83

16.66

13.88

11.90

10.41

35.00

26.88

20.16

16.12

13.44

11.52

10.08

35.00

34.72

30.86

27.77

25.25

23.14

21.36

19.84

18.51

17.36

16.33

15.43

14.61

13.88

29.76

19.84

14.88

11.90

9.92

8.50

7.44

28.73

19.15

14.36

11.49

9.57

8.21

7.18

27.77

23.80

20.83

18.51

16.66

15.15

13.88

12.82

11.90

11.11

10.41

9.80

9.25

8.77

8.33

When there is an error, digital LED will display the error code

ERROR MESSAGE

Input voltage is too high. This discharger accepts battery voltage from 5.4 to 35V,

if battery voltage is higher than 35V, it will stop working and show error message.

Over-temperature protection.

Input voltage is too low. This discharger accepts battery voltage from 5.4 to 35V,

if battery voltage is lower than 5.4V, it will stop working and show error message.

Min. Cut-off

Voltage

No. of

Cell

Battery

Type Voltage Min. Discharge Current (A)

Discharging power: 250W

Max. Discharge Current (A)

Discharging power: 250W

MAXIMUM DISCHARGE POWER CHART

OPTIONAL PARTS

LiPoPal (SK-500007)

The LiPoPal can check the voltage of each cell of a

lithium battery pack and remaining capacity in

percentage % during discharging process.

Improper usage may lead to ﬁre, property damage and physical injury.

SAFETY NOTE

Never discharge a battery below its recommended cutoff voltage. Over-discharge may damage battery and cause

FIRE or EXPLOSION.

Never discharge a battery at a higher discharge rate than it is designed for.

Never leave the discharger unattended when it is connected to battery. If any malfunction is found,

TERMINATE THE PROCESS AT ONCE.

Place the discharger and battery on a non-ﬂammable surface, and keep away from inﬂammables.

Never discharge swollen, leaky, or damaged batteries.

Batteries shall be discharged within a room temperature range of 10-40 .℃

Disconnect the battery and discharger once discharging has ﬁnished.

Recharge batteries immediately with an appropriate battery charger after discharge process is completed.

Some battery types do not like to remain discharged for extended periods of time.

PC SOFTWARE

PC software supplied with the BD250 is easy to use, intuitive. There

are two discharge mode: 1. Constant Power; 2. Constant Current.

The software can automatically sense battery cell count and

recommend a minimum safe discharge voltage. Discharge tests

may be viewed in Amp Hours, Watt Hours or Minutes. Results can

be graphed as Voltage vs. Amp hours, Watt hours, Minutes.

NOTE:

With PC software connected, BD250 allows you to export the battery voltage value at 30 seconds intervals

(for the first six minutes).

Especificaciones del producto

Marca:	SkyRC
Categoría:	cargador de bateria
Modelo:	BD250
Color del producto:	Zwart
Material de la carcasa:	Kunststof
Diagonal de la pantalla:	15 "
Resolución:	1024 x 768 Pixels
Pantalla táctil:	Ja
Modos de vídeo compatibles:	768p
Ángulo de visión, horizontal:	160 °
Ángulo de visión, vertical:	140 °
Forma de pantalla:	Flat
Relación de contraste típica:	500:1
tecnología táctil:	Multi-touch
Brillo:	300 cd/m²
Tipo de pantalla táctil:	Tafelblad
Incluye adaptador de CA:	Ja
Rango de frecuencia horizontal:	30 - 80 kHz
Rango de frecuencia vertical:	50 - 60 Hz
Puerto(s) VGA (D-Sub):	1
Consumo de energía (máx.):	30 W
Pantalla, número de colores.:	16,2 miljoen kleuren
Velocidad máxima de actualización:	60 Hz
Tecnología de visualización:	LCD
Tiempo de respuesta:	5 ms
Resoluciones de gráficos compatibles:	1024 x 768 (XGA)
Montaje VESA:	Ja
relación de aspecto:	4:3
Diámetro efectivo de la imagen:	304 x 228 mm
Cámara integrada:	Nee
Profundidad (sin base):	285 mm
Altura (sin base):	55 mm
Ancho (sin base):	375 mm
Peso (sin base):	6000 g
Consumo de energía (HDR) por 1000 horas:	- kWu
Clase de eficiencia energética (SDR):	F
Consumo de energía (DEG) por 1000 horas:	14 kWu
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
Soporta Windows:	Windows 10, Windows 7, Windows 8, Windows 8.1
Tipo de comida:	AC/DC
Tipo de panel:	TFT
Adaptador de CA, voltaje de salida:	12 V
Área de imagen:	Mat
Número de puertos ascendentes:	1
Sistema de suspensión para la pared.:	Ja
Tecnología de pantalla táctil:	Capacitief
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Escala de eficiencia energética:	A tot G
ajustes de inclinación:	Ja