Skytec 178.779 Manual de Usario
Skytec
amplificador
178.779
Lee a continuación 📖 el manual en español para Skytec 178.779 (15 páginas) en la categoría amplificador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/15
STEREO POWER AMPLIFIER
WITH MP3
SPL 300MP3
SPL 500MP3
SPL 700MP3
SPL 1000MP3
SPL 1500MP3
SPL 2000MP3
Instruction Manual
Gebruiksaanwijzing
Gebrauchsanleitung
Manual de instrucciones
V1.2
SPL–MP3 SERIES - 2 -
Basis aansluiting /Basic connections / Grundanschlüsse :
SPL–MP3 SERIES - 3 -
UK
Congratulations to the purchase of our SPL Amplifier.
Read the instructions thoroughly prior to using the unit.
SAFETY INSTRUCTIONS
Hearing damage:
Loudspeakers are easily generating high sound
pressure levels (SPL) sufficient to cause permanent
hearing damage to performers, production crew and
audience members. Care should be taken to avoid
prolonged exposure to SPL in excess of 85 dB.
Make sure that the amplifier is switched off when the
speaker box is connected or disconnected.
Do not overload the amplifier or speakers to avoid
damage to the components.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for
a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of
time, condensation may occur. Let the unit reach
room temperature before you switch it on. Never use
the unit in humid rooms or outdoors.
During operation, the housing becomes very hot. Do
not touch it during operation and immediately after.
Do not use cleaning sprays to clean the switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice
from a specialist.
Do not force the controls.
Do not place an open fire (candle, etc.) on top or next
to the box - FIRE HAZARD
Make sure that the amplifier is placed on a stable,
solid surface.
Do not place liquids on the amplifier and protect it
against humidity. Humidity can shorten the life time
considerably.
If the unit is damaged to an extent that internal
parts are visible, DO NOT connect the unit and DO
NOT switch it on. Contact your dealer.
Never try to repair the unit yourself. It does not
contain any user serviceable parts. All repairs must
be carried out by a qualified technician.
Set the amplifier to the lowest volume prior to
switching it on.
Keep the unit out of the reach of children.
Switch the unit off prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the unit.
Make sure that the mains lead cannot be damaged
when people walk on it. Check the mains lead
before every use for damages and faults!
Protect your environment. Recycle packing
material whenever possible.
Do not throw a faulty unit into normal household
waste but bring it to a special collection
point. A large part of it can be recycled.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit.
This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by
inappropriate use or disrespect of the warnings contained in this manual. SPL cannot be held responsible for personal
injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in
whatever form.
CONNECTIONS
First of all, check the specifications of the amplifier if it is suitable for your speaker boxes. Pay particular attention
to the power rating and impedance. Check if the amplifier is switched off. If yes, you can switch on the speakers.
PLEASE NOTE! Watch the polarity (+/-). Wires of the same colour must be connected to the same sign of every
side i.e. the + of the amplifier must be connected to the + of the speaker box. If the connections are inverted, the
sound quality will diminish. Only use high quality speaker cables that are suitable for the power and distance
between the amplifier and the speaker.
Especificaciones del producto
| Marca: | Skytec |
| Categoría: | amplificador |
| Modelo: | 178.779 |
¿Necesitas ayuda?
Si necesitas ayuda con Skytec 178.779 haz una pregunta a continuación y otros usuarios te responderán
amplificador Skytec Manuales
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
6 Septiembre 2024
5 Septiembre 2024
5 Septiembre 2024
5 Septiembre 2024
5 Septiembre 2024
amplificador Manuales
- amplificador Kenwood
- amplificador Onkyo
- amplificador Pioneer
- amplificador Yamaha
- amplificador AB International
- amplificador Advance Acoustic
- amplificador Arcam
- amplificador Ampeg
- amplificador Amplicom
- amplificador Alto Professional
- amplificador American Audio
- amplificador Nedis
- amplificador Pyle
- amplificador NAD
- amplificador Harman Kardon
- amplificador Hifonics
- amplificador Marquant
- amplificador Fenton
- amplificador Marantz
- amplificador Marshall
- amplificador Auna
- amplificador Samson
- amplificador Iriver
- amplificador Hartke
- amplificador Geemarc
- amplificador Luxman
- amplificador Beyerdynamic
- amplificador Tangent
- amplificador Power Dynamics
- amplificador Monacor
- amplificador Quadral
- amplificador DAP Audio
- amplificador Bluetech
- amplificador Naim
- amplificador Peavy
- amplificador Koda
- amplificador Bellman
- amplificador Konig Electronic
- amplificador MaxGear
- amplificador Engl
Últimos amplificador Manuales
19 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
22 Septiembre 2024
18 Septiembre 2024
11 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024