Solid State Logic SB 8.8 Manual de Usario

Lee a continuación 📖 el manual en español para Solid State Logic SB 8.8 (26 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/26
SB i16 and SB 8.8 User Guide Contents
Visit SSL at:
www.solidstatelogic.com
© Solid State Logic
All rights reserved under International and Pan-American Copyright Conventions
SSL
®
, Solid State Logic
®
, Total Recall
®
, Gravity
®
and Tempest
®
are ® registered trademarks of Solid State Logic.
System T™, Live L100™, Live L200™, Live L300™, Live L500™, L500 Plus™, Blacklight™
are ™ trademarks of Solid State Logic.
Dante™ and Audinate™ are trademarks of Audinate Pty Ltd.
All other product names and trademarks are the property of their respective owners
and are hereby acknowledged.
No part of this publication may be reproduced in any form or by any means,
whether mechanical or electronic,without the written permission of
Solid State Logic, Oxford, OX5 1RU, England.
As research and development is a continual process, Solid State Logic reserves the right to change
the features and specifications described herein without notice or obligation.
Solid State Logic cannot be held responsible for any loss or damage arising directly or indirectly from
any error or omission in this manual.
PLEASE READ ALL INSTRUCTIONS, PAY SPECIAL HEED TO SAFETY WARNINGS.
E&OE
December 2018
Document Revision History
INITIAL RELEASE
Revision 1.0
August 2015
SECOND RELEASE
Format revision
20th December 2018
Page 2 of 26
SB i16 and SB 8.8 User Guide Contents
Table of Contents
Introduction 4
Overview 4
Key Features 4
SB i16 and SB 8.8 Front Panel 4
SB i16 and SB 8.8 Rear Panel 4
Status LEDs and User Buttons 5
Channel LEDs 5
Device Reset 5
Brooklyn Reset 5
Hardware Connections 6
Mains Power Connections 6
Dante Connections 6
Audio Inputs and Outputs 6
GPIO 6
SSL Network I/O Controller 7
Installing Network I/O Controller 7
Network Configuration - PC 7
Network Configuration - Device 7
The GUI 8
Network View 8
Inputs/Outputs 9
Inputs 9
Focus Window 9
Outputs 10
GPIO 10
Setup 11
Ownership 12
Stagebox and Input Ownership 12
Individual Input Ownership 13
GPO Ownership 13
Gain Compensation 14
Compensated Ports 14
Calibration Point 15
Recalibrate Indication 15
Pad 16
Traditional 16
AutoPad 17
Dante Controller 18
Network Config 18
Device Info 18
Appendix A – General Specifications 19
Ventilation 19
Appendix B - Connector Pin Outs 20
XLR Wiring 20
D-Type Multipin Wiring 20
GPIO 21
Appendix C
Performance Specifications 22
Mic/Line Inputs 22
Line Outputs 23
Appendix D – Safety Notices 24
General Safety 24
Installation Notes 24
Power Safety 25
For EU 25
Environmental Declaration 26
RoHS Notice 26
For USA 26
Electromagnetic Compatibility 26
Environmental 26
Page 3 of 26

Especificaciones del producto

Marca: Solid State Logic
Categoría: No categorizado
Modelo: SB 8.8

¿Necesitas ayuda?

Si necesitas ayuda con Solid State Logic SB 8.8 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Solid State Logic Manuales

No categorizado Manuales

Últimos No categorizado Manuales