Sonic Alert SB200ss-v3 Manual de Usario

Sonic Alert Cámara de vigilancia SB200ss-v3

Lee a continuación 📖 el manual en español para Sonic Alert SB200ss-v3 (5 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/5
English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013
Sonic Boom Travel & Bed side Alarm Clock with Bed Shaker
Model SB200ss- v3
IMPORTANT – Please read these instructions carefully before use and retain for future reference. See operating instructions
on back.
-- Use only the supplied or recommended Sonic Alert adaptor to connect the unit.
Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before connecting to mains make sure that
the requirements specified on the apparatus corresponds to the available power supply i.e. AC 240V~. 100 –
-- The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table cloths, curtains, etc;
-- No naked flame sources, such as lighted candles, should be placed on the apparatus.
-- It shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
-- Do not place the product in closed bookcases or racks without proper ventilation.
OPERATION INSTRUCTIONS
IMPORTANT- please read these instructions carefully before use and retain for future reference.
FEATURES
1. Alarm 1 indicator (AL1)
9. Snooze Button/ Snooze
Duration Adjustment/
Dimmer Control
2. Alarm Mode Switch
10. Tone Control
3. PM indicator
11. Alarm Selector
4. Alarm Off Button
12. Alarm 2 indicator (AL2)
5. Alarm Set Button / Alarm
Duration Adjustment
13. Volume Control
6. Fast Button/ 12 /24
hour Selector
14. DC 9V input
7. Slow Button
15 . Vibrator input
8. Time Set Button
16. Battery Compartment
English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013
Alarm –
Enable Alarms:
1) To enable Alarm 1, slide the “ALARM SELECTOR ”(11) to AL1 position. the alarm indicator
“ “AL1 (1) will light up.
2) To enable Alarm 2, slide the “ALARM SELECTOR “(11) to AL2 position, the alarm indicator
“ ”AL2 2(1 ) will light up.
3) To enable both alarms, slide the “ALARM SELECTOR “(11) to AL1+AL2 position, the alarm
indicators “AL1 (1) and AL2 (12) “ “ “ will light up.
To Select Wake up mode
To select the wake up mode, slide the “Alarm Mode Switch (2“) to your desired position:-
a) BUZZ for sound b) VIB for bed shaker c) VIB/ BUZZ“ “ “ “ “ “ for both sound and bed
shaker
NOTE: once the wake up mode is chosen, this will apply to both alarms.
Alarm Patterns –
When the alarm is activated, alarm pattern of the buzzer / flashi display will be out of sync ng
with the vibrator. This means th when the buzzer / flashing display is ON, the vibrator will be OFF at
and while the buzzer/ flashing display is OFF, the vibrator will be ON.
ALARM 1 - When Alarm 1 is activate, it will have 3 beeps for buzzer, then the vibrator. This
pattern is repeated until the alarm is stopped.
ALARM 2 - When Alarm 2 is activate, it will have 4 beeps for buzzer, then the vibrator. This
pattern is repeated until the alarm is stopped.
Adjusting The Alarm Duration Time
The default alarm duration time setting is minutes; you may adjust the alarm duration between 1 30
minute and 59 minutes as desired. To adjust the alarm duration:
• Press and hold the AL. SET button (5) for six seconds. The clock display sh the default will ow
alarm duration as . Release the ‘30’AL SET button (5).
• Press the “ ” button SLOW (7) to adjust the alarm duration to the desired setting, from 1 minute to
59 minutes.
• When the display is showing the desired alarm duration time, it will return to the normal clock
mode after 3 seconds. The new alarm duration time setting becomes the new default and remains
in the memory until you change it again.
Snooze Operation –
1. When the alarm turns on in the morning you may press the SNOOZE Button (9) to stop the
alarm temporarily. The alarm will shut off for 9 minutes or for the predetermined time you
select from 1-30 minutes, and then turn on again. The snooze operation may be repeated
indefinitely until the alarm is turned off.
2. The SNOOZE function of Alarm 1 and Alarm 2 is independent of each other.
English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013
Adjusting The Snooze Time
The default snooze time setting is 9 minutes but you may adjust the snooze time between 1
minute and 30 minutes as desired. To adjust the snooze time:
• Press and hold the SNOOZE Button (9) for four seconds. The clock display will show the
default snooze time 9 . Release the snooze button ‘ ’
• Press the “SLOW (7)“ Button to adjust the snooze time to the desired setting, from 1 minute
to 30 minutes.
• When the display is showing the desired snooze time, after 3 seconds it will return to the normal
clock mode. The new snooze time setting becomes the new default and remains in the memory
until you change it again.
Shutting Off the Alarm –
Alarm can be shut off temporary for the day or permanently shut off.
1) When alarm goes off, press the “ALARM OFF (4)” button to turn off for the day and come back
on at the same time the next day, if alarm settings have not changed.
2) To shut the alarm off permanently, slide the “ Alarm Mode Switch“ (11) down to the OFF
position. The alarm will not come on until the “ Alarm Mode Switch“ (11) is set to VIB/BUZZ“ “,
“ “ “ “VIB , or BUZZ position.
NOTE: The Alarm Off function of Alarm 1 and Alarm 2 is independent of each other.
Dimmer Operation
There is a 5-level brightness control for the LED display. Press the SNOOZE button (9) once to
change the display brightness. The brightness will cycle from 5-4-3-2-1-2-3-4-5 (from bright to dim
then from dim to bright).
*NOTE*: The dimmer function will not work, when the clock is in snooze mode.
Volume Control –
1) To adjust the volume, rotate VOLUME wheel (13) located on the lower right corner of the clock.
Tone Control –
1) To adjust the TONE, turn the TONE wheel (10) located on the top right corner of the clock.
Bed Shaker / Vibrator –See Figure B
1) Attach the bed shaker jack to the back of clock at “VIBRATOR INPUT (15)“.
2) To turn on vibrator, slide “Alarm Mode Switch (2)” to VIB/BUZZ or VIB position. “ “ “ “
3) Place vibrator between mattress and box spring.
Battery Backup –
To use the battery backup, you can install a 9-volt alkaline battery in the back of the clock located under
the Battery Compartment Cover (16). The battery needs to be purchased separately. Note the LED

Especificaciones del producto

Marca: Sonic Alert
Categoría: Cámara de vigilancia
Modelo: SB200ss-v3

¿Necesitas ayuda?

Si necesitas ayuda con Sonic Alert SB200ss-v3 haz una pregunta a continuación y otros usuarios te responderán


Cámara de vigilancia Sonic Alert Manuales

Sonic Alert

Sonic Alert SB200ss-v3 Manual de Usario

15 Septiembre 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024
Vivotek

Vivotek AI-108 Manual de Usario

27 Octubre 2024
Acti

Acti E88 Manual de Usario

27 Octubre 2024
Yale

Yale WIPC-303W Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024
Airlive

Airlive DM-720 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024
Grandstream

Grandstream GXV3615W Manual de Usario

27 Octubre 2024
Vivotek

Vivotek IP8133 Manual de Usario

27 Octubre 2024
Olympia

Olympia OC 1280P Manual de Usario

27 Octubre 2024