Sonic Alert SBW100 Sonic Boom Manual de Usario

Sonic Alert Seguridad SBW100 Sonic Boom

Lee a continuación 📖 el manual en español para Sonic Alert SBW100 Sonic Boom (6 páginas) en la categoría Seguridad. Esta guía fue útil para 15 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

English

Model SBW100

Sonic Boom

OPERATION INSTRUCTIONS

IMPORTANT - Please read these instructions carefully before use and retain for future reference.

- Use only the supplied or recommended Sonic Alert adaptor to connect the unit.

WARNING: To prevent fire or shock hazard do not expose this appliance to rain or moisture.

- The ventilation should not be impeded by covering the ventilation openings with items

such as, newspaper, table cloth, curtains, etc.;

- No naked flame sources, such as lighted candles should be placed on the apparatus.

- It shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

- Do not place the product in closed bookcases or racks without proper ventilation.

- Where the mains/ power plug is used as the disconnect device, the disconnect device

shall remain readily operable.

GENERAL DATA:

UL listed Power Adaptor: AC100-240V~, 50/60Hz

Adaptor Output: DC5V , 2.2 A

Features

1) PM Indicator

2) Alarm 1 Indicator

3) Alarm 2 Indicator

4) Alarm Mode Switch (AL1, AL2, AL1+AL2)

5) Alarm Off / LAMP on/off

6) Time Set

7) Alarm Set

8) Snooze / Dimmer

9) Fast

10) Slow / Sleep

11) Alarm Function Switch

Test Mode:

1) Press and hold the Snooze (8) and Time (6) buttons for 3 seconds to enter the Test Mode. The

display will show "7ES7" to indicate it is in TEST Mode.

2) If within 1 minute no button is pressed, then it will exit the Test Mode and return back to the

Time Mode.

3) While in Test Mode, sliding the Alarm Function Switch (11) will demonstrate the different

functions of the clock; Buzz, VIB or Buzz & Vib.

4) After finish with the Test Mode, press any button (except the Snooze & Time buttons, which has

no effect) it will exit the Test Mode immediately.

Setting the Correct Time -

1) Press and hold the TIME Button (6) and at the same time press the FAST Button (9)

or the SLOW button (10) to advance clock display until you have desired time.

2) The lighted dot (1) located in upper left corner of the clock display indicates the time is

PM. For AM time, this dot will not light up.

Setting the Alarm Time -

Setting Alarm 1

1) Slide the ALARM MODE SWITCH (4) to AL1 position, the alarm indicator AL1 (2) will

light up.

2) Press and hold the ALARM SET (7) button and at the same time press the FAST

Button (9) or the SLOW button (10) to advance clock display until the desired

alarm setting is reached.

3) Make sure alarm time is correctly set for AM or PM.

Setting Alarm 2

4) Once alarm AL1 has been set, slide ALARM MODE SWITCH (4) to AL2 position, the

alarm indicator AL2 (3) will light up.

5) Press and hold the ALARM SET (7) button and at the same time press the FAST

Button (9) or the SLOW button (10) to advance clock display until you reach desired

alarm setting.

12) Alarm Sound Selector

13) Vibrator Output

14) Tone Wheel

15) USB for Charging

16) AUX Input

17) DC Input

18) Volume Wheel

19) Record / Play

Selecting 12 or 24 hours format -

Press and hold the Fast Button (9) for 6 seconds to enter the hour selection mode,

release the Fast Button (9) when the display shows "12 H" or "24 H".

Press the FAST button (9) to toggle between 12 or 24 hours format. If no selection is

made within 4 seconds, then the last displayed hour format will be chosen and the display

will return to the normal Time mode.

Alarm -

Enable Alarms:

1) To enable Alarm 1, slide the ALARM MODE SWITCH (4) to AL1 position. the alarm

indicator AL1 (2) will light up.

2) To enable Alarm 2, slide the ALARM MODE SWITCH (4) to AL2 position, the alarm

indicator AL2 (3) will light up.

3) To enable both alarms, slide the ALARM MODE SWITCH (12) to AL1+AL2 position,

the alarm indicators AL1 (2) and AL2 (3) will light up.

Shutting Off the Alarm -

Alarm can be shut off temporary for the day or permanently shut off.

1) When alarm goes off, press the ALARM OFF (5) button to turn off for the day. The alarm will

repeat at the same time the next day, if alarm setting has not been changed.

2) To shut the alarm off permanently, slide the Alarm Function Switch (11) down to the

OFF position.

NOTE: The Alarm Off function of Alarm 1 and Alarm 2 is independent of each other.

To Select Wake up mode -

To select the wake up mode, slide the Alarm Function Switch (11) to your desired position: -

a) BUZZ for sound (Alarm Sound is user selectable)

b) VIB for bed shaker

c) VIB/ BUZZ for both sound and bed shaker

NOTE: once the wake up mode is chosen, this will apply to both alarms.

To Select Alarm Sound

To select the alarm sound, slide the Alarm Sound Selector (12) to your desired setting.

The user can select between, two built-in sounds, the standard buzzer sounds, as well as

their own recordings.

Recordings

To make your recording, press and hold the Record (19) button 1 sec, then make your own

recording. (10 sec)

To playback your recording, press the Play (19) button.

Alarm Patterns -

When the alarm is activated, alarm pattern of the buzzer / flashing display will be out of

sync with the vibrator. This means that when the buzzer / flashing display is ON, the vibrator will

be OFF and while the buzzer/ flashing display is OFF, the vibrator will be ON.

ALARM 1 - When Alarm 1 is active, the buzzer will beep 3 times, then the vibrator will be on.

This pattern is repeated until the alarm is stopped.

ALARM 2 - When Alarm 2 is active, the buzzer will beep 4 times, then the vibrator will be on.

Especificaciones del producto

Marca:	Sonic Alert
Categoría:	Seguridad
Modelo:	SBW100 Sonic Boom

¿Necesitas ayuda?

Si necesitas ayuda con Sonic Alert SBW100 Sonic Boom haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Seguridad Sonic Alert Manuales

Sonic Alert SB300 Manual de Usario

4 Septiembre 2024

Sonic Alert SS12V Manual de Usario

3 Septiembre 2024

Sonic Alert HA360MV Manual de Usario

3 Septiembre 2024

Sonic Alert SA201 Manual de Usario

3 Septiembre 2024

Sonic Alert DB100 Manual de Usario

30 Agosto 2024

Sonic Alert HA360SSSC Manual de Usario

30 Agosto 2024

Sonic Alert HA360MVSB Manual de Usario

29 Agosto 2024

Sonic Alert RH 100 Manual de Usario

23 Agosto 2024

Sonic Alert SBW100 Sonic Boom Manual de Usario

19 Agosto 2024

Sonic Alert HA360MK Manual de Usario

18 Agosto 2024

Seguridad Manuales

Últimos Seguridad Manuales

Honeywell Galaxy G3 Manual de Usario

24 Octubre 2024

Abus fubw50020 Manual de Usario

22 Octubre 2024

Honeywell HRGX85X Manual de Usario

21 Octubre 2024

Alphatronics AlphaVision NG Manual de Usario

20 Octubre 2024

Aritech SHATTERPRO 3 Manual de Usario

20 Octubre 2024

Axis Camera Station S9001 Mk II Desktop Terminal Manual de Usario

18 Octubre 2024

Eminent EM6511 Manual de Usario

18 Octubre 2024

Eminent EM6104 Manual de Usario

18 Octubre 2024

Hikvision DS-2CD2232 Manual de Usario

18 Octubre 2024

NetworX NX-595E IP Communication Module Manual de Usario

5 Octubre 2024