Sonuus i2M Manual de Usario

Sonuus No categorizado i2M

Lee a continuación 📖 el manual en español para Sonuus i2M (19 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/19
Desktop Editor Software Manual
Version 1.3.1
i2M musicport
© Copyright 2012 Sonuus Limited 2
Desktop Editor Software Manual
Introduction
The sonuus i2M musicport is a very fast, low-latency, monophonic MIDI converter for use
with all musical instruments. It also features a high-impedance USB audio interface so you
can directly connect your musical instrument to your computer with ease.
The MIDI converter architecture is very flexible and powerful. To enable you to make full
use of this, we have provided a Desktop Editor Software application that runs on both
Microsoft Windows and Apple OSX. You can run this beside your other audio applications
to give you quick and simple access to any configuration parameters you want to adjust
on the i2M musicport.
The basic operation of the i2M musicport is not described in this manual. Please refer to
the Owner’s Manual that came with your i2M musicport for instructions on the basic
operation and features of this product.
This manual describes the features and options available within the MIDI converter and
how to use the Desktop Editor Software to control these.
Application Overview
When you run the Desktop Editor Software, you will see the window in Figure 1.
The window has standard buttons similar to other applications to minimise the window,
and to close the application. There is also a “topmost” button, which keeps the window
floating above other applications even when the other application has focus. This feature
F
igure 1: Overview of the i2M musicport Desktop Editor window.
Close Editor (Quit)
Topmost button.
This keeps the Editor above
other application windows.
Minimise Editor window
Select Tabs to edit different sets of parameters
Active MIDI Configuration is highlighted
Name of current device is always available. Click this to select other connected devices.
Settings and configurations
can be saved and loaded
as backup, or to swap with
other users.
Signal indicators are always visible
i2M musicport
© Copyright 2012 Sonuus Limited 3
Desktop Editor Software Manual
makes it easy to run the Desktop Editor Software alongside other applications, such as
sequencers, so it appears much like any other “floating palette” of your main application.
There are several pages of information and parameters which you can configure. These
are selected by clicking on the tabs at the top of the window.
Buttons and switches can be activated by left-clicking the mouse button while sliders and
knobs can be adjusted by left-clicking and dragging the mouse while the button is
pressed. Controls can also be adjusted by moving the mouse wheel when the mouse
pointer is above the control.
Selecting which i2M musicport to configure
You can connect several i2M musicport devices to your computer at once, but the
Desktop Editor Software can only configure one of these at a time. You can select which
device is currently being edited by clicking on the device name box at the bottom-left of
the application and choosing the required device from the menu.
So you can identify which device is which, you can give unique names to each of your
devices: see “Device Name” on page 14.
Indicators
Next to the device name box are three indicators to show when the audio signal is
clipping and when the i2M musicport is sending or receiving MIDI messages.
The clip indicator replicates the behaviour of the light on the i2M musicport and will
illuminate when the input signal clips. This can be useful if you can’t see the
i2M musicport.
The MIDI indicators show when the i2M musicport is receiving, or sending MIDI messages.
This can be used to verify MIDI routing to and from your software. Note that the receiving
indicator only responds to MIDI that the i2M musicport is able to respond to, such as
controller messages used for the hold and sustain controllers.
Loading and Saving
To allow you to easily backup your settings, or to transfer them to another device, all the
settings of the i2M musicport can be saved to a file with an
“i2M_all”
file extension. This
can be done my clicking the “Save All” button.
When a MIDI Configuration tab is active, this button changes to a “Save midi config”
button which allows you save the currently selected MIDI Configuration to a file with the
“i2M_midi”
file extension.. This can be useful if you want to copy one configuration to
another before editing it, or to let you exchange your favourite configurations with other
users.
The “Load” button lets you load these files. To load a MIDI Configuration, simply select the
MIDI Configuration tab into which you want to load the configuration file.

Especificaciones del producto

Marca: Sonuus
Categoría: No categorizado
Modelo: i2M

¿Necesitas ayuda?

Si necesitas ayuda con Sonuus i2M haz una pregunta a continuación y otros usuarios te responderán


No categorizado Sonuus Manuales

Sonuus

Sonuus i2M Manual de Usario

7 Septiembre 2024
Sonuus

Sonuus G2M V3 Manual de Usario

7 Septiembre 2024
Sonuus

Sonuus i2M Musicport Manual de Usario

7 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024