Sony RM-VL1000 Manual de Usario

Sony Mando a distancia RM-VL1000

Lee a continuación 📖 el manual en español para Sony RM-VL1000 (84 páginas) en la categoría Mando a distancia. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/84

3-244-192- (1)12

Integrated Remote

Commander

Operating Instructions

RM-VL1000

WARNING

To prevent fire or shock hazard,

do not expose the unit to rain

or moisture.

To avoid electrical shock, do not

open the cabinet. Refer

servicing to qualified personnel

only.

WARNING

You are cautioned that any

changes or modifications not

expressly approved in this manual

could void your authority to

operate this equipment.

For the customers in the USA

Owner’s Record

The model number is located on

the front panel.

The serial number is located on

the inner side of the battery

compartment.

Record these numbers in the

spaces provided below. Refer to

them whenever you call upon

your Sony dealer regarding this

product.

Model No. RM-VL1000

Serial No.

NOTICE FOR THE CUSTOMERS IN

THE U.S.A.

NOTE

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses, and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause

harmful interference to radio

communications. However, there is no

guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct the

interference by one or more of the

following measures:

– Reorient or relocate the

receiving antenna.

– Increase the separation

between the equipment and

receiver.

– Connect the equipment to an

outlet on a circuit different

from that to which the receiver

is connected.

– Consult the dealer or an

experienced radio/TV

technician for help.

Features

The RM-VL1000 Remote

Commander provides centralized

control of all your AV components

from a single remote commander

and saves the trouble of operating

different AV components with

different remote control devices.

The following are its main

features.

Customizing 180 labels of

control keys in the dot matrix

LCD with dot matrix makes label

customizing possible. A total of

180 labels on the LCD, such as

component labels, macro labels,

etc., can be customized. A label of

up to 8 letters with digits,

characters or symbols can be

selected and displayed.

Control of 12 components

Control of a maximum of 12

components (TV, SAT, VCR, DVD,

CD, AMP, etc.) is possible.

Components are selectable with 12

keys on the LCD display by

pressing the Label Select buttons.

This Commander has an LCD

display that changes the label

display according to the selected

component.

Setting a maximum of 36

macro commands of a

maximum of 32 successive

steps

A maximum of 36 macro

commands which provide a

maximum of 32 successive steps

by pressing a single button can be

set (12 system control macros, 12

component macros and 12 timer

macros). Macro execution speed is

changeable.

All power off macro commands

for Sony components are preset at

the factory to the SONY OFF label.

Clock display and timer

function

A maximum of 12 timer macros,

timer control of automatic on/off

and other controls (such as

recording, stopping, etc.) of each

component is possible.

Centralized control of Sony AV

components with this one

remote commander

This Commander is preset at the

factory to operate Sony brand

components, so you can use it out

of the box as a control center for

your Sony AV components.

Remote control signals for non-

Sony components are also

preset

This Commander is preset for

most major brands components

other than Sony. You can control

your components remotely by

setting their code numbers (page

13).

Learning function for

programming other remote

control signals you need

This Commander has a learning

function to learn remote control

signals to operate non-preset

components or functions (page

23).

In addition, the Commander can

learn remote control signals

(infrared signals only) of non

Audio Visual components such as

air-conditioners, lights, etc.

(Certain appliances or functions

may not be available) (page 28).

Channel macro function allows

you to select a channel with a

single button

Up to 4 key steps can be

programmed on macro labels. If

you set the key operations for

entering a channel number on a

macro label, you can select the

channel by selecting that macro

label (page 48).

LCD display with backlight

The display backlight allows

operation even in the dark.

Especificaciones del producto

Marca:	Sony
Categoría:	Mando a distancia
Modelo:	RM-VL1000
Color del producto:	Zwart
Peso.:	1000 g
Ancho:	185 mm
Profundidad:	13 mm
Altura:	150 mm
Diagonal de la pantalla:	7 "
Resolución:	800 x 600 Pixels
Formato de audio soportado:	MP3
Formatos de vídeo soportados:	MPEG4
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	Memory Stick (MS), MMC, SD, SDHC, xD
Relación de contraste típica:	500:1
Brillo:	250 cd/m²
luz de fondo LED:	Ja
Agenda:	Ja
Número de puertos USB 2.0:	1
Interfaz:	USB 2.0
Formato de imagen soportado:	JPG
relación de aspecto:	4:3
Despertador:	Ja
Capacidad de memoria incorporada:	1000 GB
Mando a distancia incluido:	Ja