Sony UP-990AD Manual de Usario
Lee a continuación 📖 el manual en español para Sony UP-990AD (20 páginas) en la categoría Printer. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/20
2-659-569-15 (1)
© 2006 Sony Corporation
UP-990AD
UP-970AD
Instructions for Use _______________________________________ B
Hybrid Graphic
Printer
2
Owner’s Record
The model and serial numbers are located at the rear.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. ____________________
Serial No. ____________________
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
No modification of this equipment is allowed.
THIS APPARATUS MUST BE EARTHED.
To disconnect the main power, unplug the
power plug.
When installing the unit, incorporate a readily
accessible disconnect device in the fixed
wiring, or connect the power plug to an easily
accessible socket-outlet near the unit.
Do not position the ME equipment where it is
difficult to unplug the power plug.
If a fault should occur during operation of the
unit, operate the disconnect device to
switch the power supply off, or unplug the
power plug.
For the customers in the U.S.A.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC Rules.
For the customers in Canada
This unit has been certified according to Standard
CAN/CSA-C22.2 No.60601-1.
For the customers in the U.S.A. and
Canada
Both the UP-990AD and the UP-970AD Hybrid
Graphic Printers are Non-Patient Equipment.
These units cannot be used in the vicinity of patients.
* Patient Vicinity
When you use this product connected to 240V single
phase, be sure to connect this product to a center tapped
circuit.
Important safeguards/notices for use in
the medical environments
1. All the equipments connected to this unit shall be
certified according to Standard IEC60601-1,
IEC60950-1, IEC60065 or other IEC/ISO Standards
applicable to the equipments.
WARNING
Symbols on the products
This symbol indicates the equipotential
terminal which brings the various parts of a
system to the same potential.
This symbol indicates the manufacturer, and
appears next to the manufacturer’s name and
address.
Refer to the operating instructions
Follow the directions in the operating
instructions for parts of the unit on which this
mark appears.
R1.83m
(6 feet)
3
2. Furthermore all configurations shall comply with the
system standard IEC 60601-1-1. Everybody who
connects additional equipment to the signal input
part or signal output part configures a medical
system, and is therefore, responsible that the system
complies with the requirements of the system
standard IEC60601-1-1. If in doubt, consult the
qualified service personnel.
This unit can not be used in the patient environment.
* Patient Environment
3. Do not touch the patient simultaneously while you
are contacting with this equipment.
4. For this particular equipment, all accessory
equipment connected as noted above, must be
connected to mains via an additional isolation
transformer conforming with the construction
requirements of IEC60601-1 and providing at least
Basic Insulation.
5. The leakage current could increase when connected
to other equipment.
6. This equipment generates, uses, and can radiate radio
frequency energy. If it is not installed and used in
accordance with the instruction manual, it may cause
interference to other equipment. If this unit causes
interference (which can be determined by
unplugging the power cord from the unit), try these
measures: Relocate the unit with respect to the
susceptible equipment. Plug this unit and the
susceptible equipment into different branch circuit.
Consult your dealer. (According to standard IEC60601-
1-2 and CISPR11, Class B, Group 1)
R1.5m
Especificaciones del producto
| Marca: | Sony |
| Categoría: | Printer |
| Modelo: | UP-990AD |
¿Necesitas ayuda?
Si necesitas ayuda con Sony UP-990AD haz una pregunta a continuación y otros usuarios te responderán
Printer Sony Manuales
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
Printer Manuales
- Printer Samsung
- Printer HP
- Printer Panasonic
- Printer Epson
- Printer Honeywell
- Printer Toshiba
- Printer Xerox
- Printer Canon
- Printer Brother
- Printer Sharp
- Printer Kodak
- Printer Roland
- Printer Citizen
- Printer Fujifilm
- Printer Konica Minolta
- Printer Mitsubishi
- Printer Seiko
- Printer Argox
- Printer Oki
- Printer Royal Sovereign
- Printer Fujitsu
- Printer Bixolon
- Printer Ricoh
- Printer Lexmark
- Printer Dell
- Printer Olivetti
- Printer Zebra
- Printer Kyocera
- Printer DNP
- Printer GoDEX
- Printer Triumph-Adler
- Printer Oce
- Printer Ultimaker
- Printer Pantum
- Printer Tomy
- Printer StarTech.com
- Printer Toshiba TEC
- Printer Frama
- Printer Kogan
- Printer Brady
- Printer Star Micronics
- Printer Datamax-O'neil
- Printer Dascom
- Printer HiTi
- Printer Primera
- Printer TSC
- Printer EC Line
- Printer Fargo
- Printer Microboards
Últimos Printer Manuales
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024