Speco Technologies PMM-120A Manual de Usario

Lee a continuación 📖 el manual en español para Speco Technologies PMM-120A (12 páginas) en la categoría receptor. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
OPEN COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING: REMOVAL OF THE
COVER SHOULD ONLY BE PER-
FORMED BY QUALIFIED SERVICE
PERSONNEL - NOT USER SER-
VICEABLE. THE UNIT SHOULD
ALWAYS BE UNPLUGGED BEFORE
REMOVING THE COVER, AND
REMAIN UNPLUGGED WHILE THE
COVER IS REMOVED.
WARNING: TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT
EXPOSE UNITS NOT
SPECIFICALLY DESIGNED FOR
OUTDOOR USE TO RAIN OR
MOISTURE.
INSTRUCTION
MANUAL
PUBLIC ADDRESS
AMPLIFIER
PMM-120A
PMM-60A
RISK OF ELECTRIC
SHOCK, DO NOT OPEN!
120 WATT RMS
60 WATT RMS
200 NEW HIGHWAY, AMITYVILLE, NY11701
PHONE : 1-800-645-5516, 631-957-8700 IN METRO NY
http://www.specotech.com
1.Unpacking
After removing the amplifier from the carton, inspect for any exterior damage to
the unit. If damage is noted, notify the carrier at once so that a claim can be
justified. Save all packing material. This is important when the claim is
processed.
PRECAUTIONS
2.Ventilation
To offset heat generated by the unit, it is necessary to provide ample ventilation
around the unit. Avoid blocking or impeding the ventilation holes on the unit. To
prevent unnecessary problems, install the unit in a place free from any
vibrations, direct sunlight, humidity or dust circulation.
3.Avoid spilling liquids or allowing materials to enter the cabinet
If the unit gets wet or any foreign material enters the cabinet, immediately
disconnect the A.C. line cord and consult your dealer or qualified technician.
2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider that the other. A grounding type plug has two blades
and a third
grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where the exit from the apparatus.
11. Only use the attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way
such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
16. Warning – To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
17. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
18. Caution – Use of any controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
3
Controls and Connections
FRONT PANEL
REAR PANEL
13
~
~
FRONT PANEL
1) MIC-1 Volume control 7) Bass Control
2) MIC-2 Volume control 8) Treble Control
3) MIC-3 Volume control 9) Master Volume control
4) MIC- -4/AUX 1 Volume control 10) Power on/off switch with LED indicator
5) MIC- -5/AUX 2 Volume control 11) Output level indicator
6) MIC- -6/AUX 3 Volume control
REAR PANEL
1) AC power cord 17) EQ/MIX input RCA jack
2) Ground 18) Preamp output RCA jack
3) Speaker outputs 19) Tape output RCA jack
4) Manual muting terminals 20) Booster output RCA jack
5) MIC- -6 input terminals (Balanced) 21) AUX 3 input RCA jacks
6) MIC- - -5 input terminals (Balanced) 22) MIC 6/AUX 3 input selector switch
7) MIC- -4 input terminals (Balanced) 23) AUX 2 input RCA jacks
8) MIC- - -3 input terminals (Balanced) 24) MIC 5/AUX 2 input selector switch
9) TEL/PAGING input terminals (Balanced)** 25) AUX-1 input RCA jacks
10) TEL/PAGING input level control 26) MIC- -4/AUX 1 input selector switch
11) TEL/PAGING VOX sens. control 27) Loudness on/off switch
12) MIC 28) MIC-1 VOX on/off switch -4 (XLR connector) input
13) AC accessory outlet (Unswitched) 29) MIC-3 (XLR connector) input
14) AC fuse holder 30) MIC-2 (XLR connector) input
15) MOH output terminals 31) MIC-1 (XLR connector) input
16) MOH output level control*
*MOH = Music on hold
**TEL/PAGING= Connection input terminals for
general or emergency paging.
**TEL/PAGING is not to be connected directly to a
telephone circuit or TNV circuit.

Especificaciones del producto

Marca: Speco Technologies
Categoría: receptor
Modelo: PMM-120A

¿Necesitas ayuda?

Si necesitas ayuda con Speco Technologies PMM-120A haz una pregunta a continuación y otros usuarios te responderán




receptor Speco Technologies Manuales

receptor Manuales

Últimos receptor Manuales