Spring USA SM-181C Manual de Usario

Spring USA horno SM-181C

Lee a continuación 📖 el manual en español para Spring USA SM-181C (4 páginas) en la categoría horno. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Operation

Manual

Models: SM-181C & SM-181C-T

Buffet

Induction

Cookware

The Evolution of Intelligent Design®

Spring USA®

127 Ambassador Drive

Suite 147

Naperville, IL 60540-4079

Phone: (1) 630-527-8600

Fax: (1) 630-527-8677

Email: springusa@springusa.com

Web: www.springusa.com

Before You Begin:

Read the following instructions in their entirety.

Use proper cookware. Your cookware must be induction-ready.

Check your ventilation. Your MAX Induction® Range must have the

proper ventilation in order to operate correctly. There must be at least 4”

of space available around your induction range.

Ensure that you have dedicated power to the installed location. Each

induction warmer will draw 15 Amps. One unit will operate from a single

20 Amp dedicated circuit.

Suitable Cookware

Stainless Steel Multi-Ply

Cookware Iron/Steel Frying Pan Cast Iron

Aluminum Cookware

with Induction Disc Iron/Steel Tray Enameled Ware

Copper, Bronze Or Aluminum

Cookware Glass Cookware

Ceramic Cookware

Without Special Coating

Pans with a Concave Bottom Bowl Shaped Cookware

Cookware with a

Diameter of Less

Than 4.5”

Unsuitable Cookware

www.springusa.com

(1) 630-527-8600

The Evolution of Intelligent Design®

SM-181C-T Shown Below:

Safety Precautions:

Plug the power cord into a dedicated circuit. Nothing else should be Note:

plugged into this circuit. Each MAX Induction® Range must have its

own, sufficient power supply as outlined below. Once you have plugged

the unit in, it will beep, and an ‘EO’ code will appear in the display

window.

To Begin:

Turn the unit on. An ‘EO’ code will appear next in the digital window,

indicating the induction range is searching for cookware.

Turn the knob clockwise to turn the unit on. Your MAX Induction® range

will always start out in the “Cook” mode. “Cook” is the default mode.

Place suitable cookware within the circle on top of the MAX Induction®

Range.

Select either the “Cook” Mode or the “Temp” Mode.

In “Cook” mode, turn the dial clockwise. The LED will display cook

power levels of 1 thru 20.

In “Temp” mode, turn the dial clockwise. The LED will display

temperature levels from 110° to 400° fahrenheit. (43°C to 204°C).

Turn the knob clockwise to set the power level or temperature.

To shut the induction range off, turn the knob counter clockwise until you

hear the unit ‘click’ and turn off.

Actual range temperatures may vary due to a number of variables, such as

ambient temperature in the immediate surrounding area, content and

volume of food being heated or cooked, and whether or not you are using

a cover on the serving vessel.

Never attempt to service any part of your MAX Induction® Range on

your own. Contact our Service Department by calling (1) 630-527-8600.

Attempting to service your Induction Range on your own, or through an

unauthorized repair facility automatically voids your warranty. For

service forms, visit the Spring USA website.

For Limited Warranty Information, visit www.springusa.com

Note:

This equipment uses, generates, and can radiate radio frequency energy.

If not installed correctly, and used in accordance with the instructions,

may cause interference to radio communications. Users or guests with

Pacemakers should contact their health care professional for additional

information about its effects with electromagnetic fields of the induction

range.

NEMA 5-15

6’ Cord

1800 Watts 50-60 Hz110-120 Volts / 15

Amps

SM-181C &

SM-181C-T

Plug TypePeak PowerVoltage / AmpsModel #

Specifications:

Induction Range Error Codes:

Front Display Panel of the SM-181C-T MAX Induction® Range:

www.springusa.com

Review your dedicated power

requirements. Each range must

operate with the power required on

Page 4.

Range will not turn on. Range is

experiencing temporary voltage

overload or is not on its own,

dedicated circuit.

Remove the cookware from the

range and let the range cool. Make

sure the vents are clear. Verify you

are using induction-ready

cookware. Once the range has

cooled, restart.

The range has overheated.

Clear vents, let range cool down,

then restart. If error message

continues, your range needs to be

serviced.

Range has overheated due to

blocked ventilation and has shut

down the range.

Place an induction ready pan on

the range.

Induction range does not sense

induction-ready cookware has

been placed on the glass surface

SolutionCauseError

4 5

(1) 630-527-8600

Especificaciones del producto

Marca:	Spring USA
Categoría:	horno
Modelo:	SM-181C
Tipo de operación:	Touch
Color del producto:	Grey, White
Ancho:	95 mm
Profundidad:	20 mm
Altura:	205 mm
Material de la carcasa:	Aluminium
Color:	Ja
Frecuencia del adaptador de CA:	50 Hz
Diagonal de la pantalla:	6.8 "
Certificación:	IP20\nIP54
Cámara integrada:	Ja
Número de pantallas admitidas:	2
Protección contra la lluvia:	Nee
Incluye base de suelo:	Nee