Spring USA SM-251-2CR Manual de Usario

Spring USA horno SM-251-2CR

Lee a continuación 📖 el manual en español para Spring USA SM-251-2CR (4 páginas) en la categoría horno. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Installation &

Operation

Manual

Models: SM-251-2CR

SM-253-2CR

(International)

127 Ambassador Drive

Suite 147

Naperville, IL 60540-4079

Phone: 630-527-8600 Fax: 630-527-8677

Email: springusa@springusa.com

Website: www.springusa.com

Safety Precautions & Key Points:

Cabinet Ventilation must be provided. The inside temperature of the

cabinet must not exceed 90°F / 32° C. Both vents & circulation fans

must be installed in order for your induction range to operate properly.

Failure to install proper ventilation automatically voids your warranty.

Actual range temperatures may vary due to a number of variables, such

as ambient temperature in the immediate surrounding area, content &

volume of food being heated or cooked, & whether or not you are using a

lid on the serving vessel.

-------------

Never attempt to service any part of your MAX Induction®Range on

your own. Contact our Service Department by calling (1) 630-527-8600.

Attempting to service your Induction Range on your own, or through an

unauthorized repair facility automatically voids your warranty. For

service forms, visit the Spring USA website.

For Limited Warranty Information, visit www.springusa.com

Note:

This equipment uses, generates and can radiate radio frequency energy.

If not installed correctly and used in accordance with the instructions,

may cause harmful interference to radio communications. Users or

guests with Pacemakers should contact their health care professional

prior to using this product.

The Evolution of Intelligent Design®

Before You Begin: 2

www.springusa.com

630-527-8600

Filter Maintenance for Double MAX Induction

®7

Read the following instructions in their entirety. Use proper cookware.

Your cookware must be induction-ready.

Check your ventilation. Your MAX Induction®Range must have the

proper ventilation in order to operate correctly. There must be at least 10”

of space available under a mounted induction range. Cabinets housing the

induction ranges should have both vents & circulation fans installed. The

inside temperature of the cabinet must not exceed 90°F / 32° C.

Ensure that you have dedicated power to the installed location.

Refer to the grid on Page 6 for Electrical Specifications.

Your MAX Induction®Double Induction Range is equipped with two

grease filters in order to protect the electronics from contaminants.

Grease filters should be removed & inspected daily. To clean the filters,

slide the filters out of the track on the bottom of the induction range. Wash

thoroughly with mild liquid detergent. Shake remaining water out of the

filter & let is stand until dry. Once completely dry, reinsert into the tracks

of the induction range. Filters are not dishwasher safe, and must be

washed by hand.

Once the filter becomes difficult to clean, or begins to show ware, replace

with a new filter. Never operate the induction range without grease filters

installed. New filters can be ordered by contacting Spring USA directly.

Induction Range Error Codes:

Review your dedicated power

requirements. Each range must

operate with the power required on

Page 6.

Range will not turn on. Range is

experiencing temporary voltage

overload or is not on its own,

dedicated circuit.

Remove the cookware from the

range and let the range cool. Make

sure the vents are clear. Verify you

are using induction-ready

cookware. Once the range has

cooled, restart.

The range has overheated.

Clear vents, let range cool down,

then restart. If error message

continues, your range needs to be

serviced.

Range has overheated due to

blocked ventilation and has shut

down the range.

Place an induction ready pan on

the range.

Induction range does not sense

induction-ready cookware has

been placed on the glass surface

SolutionCauseError

Suitable Serving Ware:

Your MAX Induction®Range works with induction-ready serving vessels.

Visit the Spring USA Website for a full line of induction-ready,

professional serve ware.

Serving pieces must have a flat bottom, in order to make full contact with

the countertop.

Serving pieces that are footed, or that have a raised ridge, are not for use on

this system, as they cannot make full contact with the counter surface.

Vessels must have a diameter greater than 9”.

Glass Cookware is not suited for use on your induction warming system.

Serving vessels must be centered on the induction warmer for optimal

heating and performance.

www.springusa.com

Stainless Steel Multi-Ply

Cookware

Carbon Steel

Aluminum Cookware with

Induction Disc Cast Iron

Convertible Buffet Servers Aluminum Tray With

Induction Disk

For a built-in applications, your counter or table thickness must not

exceed 2”. Your MAX Induction®Range must have the proper

ventilation in order to operate correctly. There must be at least 10” of

space available under a mounted induction range. Cabinets housing the

induction range should have both vents & circulation fans installed. The

inside temperature of the cabinet must not exceed 90°F / 32° C.

To mount your MAX Induction®Double Range, you must first remove

the control panel (refer to page 4 for instruction). Place the template of

the induction range on the surface you are preparing for the install.

Center the template, allowing a minimum of 4” of countertop space on

each side of the induction range. The template measures 26.38” (670

mm) long x 13.39” (340 mm) wide.

Once you insert the induction range into the cut out, the edge of the

range will sit 0.5” (12.75 mm) above the surface of the countertop.

Apply a thin bead of 100% rubber silicone sealant around the surface

perimeter of the mounted induction range.

Mounting Your Induction Range:

4 5

Double MAX Induction

Range (Countertop Use):

Cabinet ventilation (vents & circulation fans)

must be provided. Inside temperature of the

cabinet must not exceed 90°F / 32°C.

Control Panel adjusts 1/2”

to 3/4” depending on the

thickness of plywood.

Remove your MAX Induction®range from the packaging and inspect all

parts. If the ceramic glass surface is cracked or damaged, do not install the

range. Contact your supplier for a replacement range.

Removing the Control Panel:

Your MAX Induction®Double Range can be used as a countertop unit, or

can be built into a countertop. If you’re using it as a countertop unit, the

control box can be mounted in the center of the two ranges, or can be

removed & placed on the left end of the induction range assembly.

To remove the control box assembly, turn the induction range on its side.

Remove the two locking screws which connect the control box to the range.

Pull down & remove the control box from the induction housing. The

control box will be connected to the induction range by a cable. To remove

the cable from the range, loosen the two thumb-screws & pull out the

connector.

The control panel can now be connected to the side of the double induction

range. Remove the small metal housing from the side of the range. This

housing can be placed over the center opening to prevent dust & grease

from corroding the connector. Screw the cable connector to the side

connection. Tighten the screws, insert locking teeth into the mounting slots

& mount two locking screws into the bottom of the induction range

housing.

Especificaciones del producto

Marca:	Spring USA
Categoría:	horno
Modelo:	SM-251-2CR
Color del producto:	Black, Grey
Peso.:	37 g
Ancho:	31.5 mm
Profundidad:	60 mm
Altura:	14 mm
Longitud del cable:	0.11 m
Peso del embalaje:	40 g
Ancho del embalaje:	174 mm
Altura del embalaje:	194 mm
Tipo de embalaje:	Polybag
Resolución Máxima:	7680 x 4320 Pixels
HDCP:	Ja
Velocidad máxima de actualización:	120 Hz
Soporte HDR:	Ja
Versión HDMI:	2.1
Certificados de sostenibilidad:	CE, REACH, RoHS
Temperatura de almacenamiento:	-40 - 80 °C
Modo alternativo USB Type-C DisplayPort:	Ja
Versión HDCP:	2.2
conjunto de chips:	VL103, RTD2173
Ratio de transferencia:	48 Gbit/s
Temperatura de funcionamiento (TT):	-20 - 40 °C
Humedad relativa de funcionamiento (VV):	0 - 85 procent
Código del Sistema Armonizado (SA):	84733080
Conexión 1:	USB Type-C
Conexión 2:	HDMI
Conector 1 factor de vorm:	Recht
Factor de vorm del conector 2:	Recht
Conexión 1 tipo:	Mannelijk
Tipo de conexión 2:	Vrouwelijk