Spring USA SM-261C Manual de Usario

Spring USA horno SM-261C

Lee a continuación 📖 el manual en español para Spring USA SM-261C (4 páginas) en la categoría horno. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Buffet

Induction

Cookware

The Evolution of Intelligent Design®

Spring USA

127 Ambassador Drive

Suite 147

Naperville, IL 60540-4079

Phone: (1) 630-527-8600

Fax: (1) 630-527-8677

Email: springusa@springusa.com

Web: www.springusa.com

Installation

& Operation

Manual

Model: SM-181R, SM-261R &

SM-263R & SM-263RU (International )

Before You Begin:

Read the following instructions in their entirety. Use proper serving

vessels. All serving vessels must be induction-ready.

Your MAX Induction

Range must have proper ventilation in order to

operate correctly. There must be at least 7” of space available under a

mounted induction range. Cabinets housing the induction range (s) should

have intake & exhaust vents. Active ventilation may be needed. For

optimal performance, the inside temperature of the cabinet should not

exceed 90°F / 32° C.

Ensure that you have dedicated power to the installed location. Refer to the

grid on Page 6 for Electrical Specifications.

www.springusa.com

Stainless Steel Multi-Ply

Cookware

Carbon Steel Aluminum Cookware with

Induction Disc Cast Iron

Suitable Serving Ware:

Convertible Buffet Servers

Your MAX Induction

Range works with induction-ready serving vessels.

Visit the Spring USA Website for a full line of induction-ready, profes-

sional serve ware.

Serving pieces must have a flat bottom, in order to make full contact with

the countertop.

Serving pieces that are footed, or that have a raised ridge, are not for use on

this system, as they cannot make full contact with the counter surface.

Vessels must have a bottom diameter greater than 4”.

Glass Cookware is not suited for use on your induction warming system.

Serving vessels must be centered on the induction warmer for optimal

heating and performance.

Aluminum Tray With Induction

Disk

Induction Range Error Codes:

Error Cause Solution

E0 Range does not detect a pan on the

range.

Place an induction ready pan on the

range.

E2 Overheating protection has been

activated & the range has been

shut down.

Remove the cookware from the

range. Let the unit cool down, then

restart. Make sure the cookware

you are using is induction ready.

E3 Range is experiencing temporary

voltage overload.

Let the induction range cool down

completely, before restarting. Re-

view dedicated power requirements.

E1 Range has overheated due to

blocked ventilation and has shut

down the range.

Clear vents, let range cool down,

then restart. If error message con-

tinues, your range needs to be ser-

viced.

Safety Precautions & Key Points:

Cabinet Ventilation must be provided. The inside temperature of the

cabinet must not exceed 90°F / 32° C. Regularly inspect air intake grill on

underside of ranges. Clean by vacuuming, as needed. Ventilation areas

into and out of the cabinet should be provided. Active ventilation may be

necessary dependent on cabinet design. Attach Control Panel to range

prior to connecting to power source.

Actual range temperatures may vary due to a number of variables such as

ambient temperature in the immediate surrounding area, content and

volume of food being heated or cooked, and whether or not you are

utilizing a cover on the vessel you are using.

Never attempt to service any part of your MAX Induction® Range on your

own. Contact our Service Department by calling (1) 630-527-8600.

Attempting to service your Induction Range on your own, or through an

unauthorized repair facility automatically voids your warranty. For service

forms, visit the Spring USA Website. Always disconnect from power

source prior to removing range from cabinet.

For Limited Warranty Information, visit www.springusa.com

Note:

This equipment uses, generates and can radiate radio frequency energy. If

not installed correctly and used in accordance with the instructions, may

cause harmful interference to radio communications.

Mounting Control Panel:

www.springusa.com

Electrical Specifications:

Model # Voltage / Amps Peak Power Plug Type

SM-181R 110-120 Volts / 15 Amps 1800 Watts 50-60 Hz NEMA 5-15 6’ Cord

SM-261R 208-220 Volts / 11.8 Amps 2600 Watts 50-60 Hz NEMA 6-20 6’ Cord

SM-263R 220-240 Volts / Varied Amps 2600 Watts 50-60 Hz CEE 7/7 16A European

Plug or BS 1363 13A

U.K. Plug 1.8 m Cord

SM-263RU 220-240 Volts / Varied Amps 2600 Watts 50-60 Hz BS 1363 13 A U.K. Plug

1.8 M Cord

(1) 630-527-8600

Mounting The Control Panel:

To mount the Control Panel (B), use the template provided. Place the tem-

plate on a plane or panel, perpendicular to the MAX Induction® Range,

centering it to the range whenever possible.

The Control Panel cutout should measure 5-¾”x 2-¾”. Place the Control

Panel (B) into cutout hole. Using the four (C) wood screws provided, secure

the Control Panel into place.

Using Your MAX Induction® Range:

Attach Control Panel to range prior to connecting to power source. Turn

the induction range on (remember, the induction unit, by default, will start

out in cook mode). An ‘E0’ message will appear in the panel. Place an

induction-ready pan or server on the induction range. The display will

begin to read the set temperature.

Set a stainless steel pan or server filled with water on top of the granite

directly over the induction range mounted underneath. The blinking LED

light should go solid. This means the induction range is reading the pan.

How To Operate:

www.springusa.com

Your MAX Induction

Range is designed to operate in two modes:

“Cook” or “Temp”.

“Cook” Mode offers you high-speed heating, used for sautéing, omelet

stations, pasta bars or demonstration cooking.

“Temp” Mode offers you thermostatically controlled holding temperatures

for use with soups, sauces, buffets or pastry work. The LED display allows

for more accurate temperature selection.

In “Cook” Mode:

 An ‘E0’ code will flash until suitable cookware is placed on the glass

surface of the range.

 The LED panel will display a two-digit number indicating the power

level. Power levels run from 1 thru 20.

 As a safety precaution, if no cookware is placed on the induction range

plate after 2-1/2 minutes, the unit will shut off.

 Once suitable cookware has been placed on the glass induction plate, the

unit will continue to cook until the range is manually shut down, or the

mode is changed over to “Temp” mode.

Note:

There must be at least 7” of space available under a mounted induction

range. Cabinets housing the induction ranges should have both vents & circulation

fans installed. The inside temperature of the cabinet must not exceed 90°F / 32° C.

In “Temp” Mode:

 An ‘E0’ code will flash until suitable cookware is placed on the glass

surface of the range.

 The LED panel will display a three-digit number indicating the tempera-

ture setting. To increase the temperature setting, turn the dial clockwise.

To decrease the setting, turn the dial to the counter-clockwise.

 The induction range will continue to warm the food until the set tempera-

ture has been reached. Once the temperature has been reached, the range

will maintain that pre-selected temperature setting.

 Temperature settings in “Temp” mode, in fahrenheit are:

110°, 120°, 130°, 140°, 150°, 160°, 170°, 180°, 190°, 200°, 220°, 240°,

260°, 280°, 300°, 320°, 340°, 380° & 400°.

Celsius: 43°, 49°, 54°, 60°, 66°, 71°, 77°, 82°, 88°, 93°, 104°, 116°, 127°,

138°, 149°, 160°, 171°, 182°, 193° & 204°.

(1) 630-527-8600

Especificaciones del producto

Marca:	Spring USA
Categoría:	horno
Modelo:	SM-261C
Color del producto:	Zwart
Peso.:	200 g
Ancho:	77 mm
Profundidad:	15 mm
Altura:	121 mm
Amable:	PC
Indicadores LED:	USB
Interruptor encendido / apagado:	Ja
Lector de tarjetas de memoria integrado:	Ja
País de origen:	China
Suministro de red:	0.5 W
Entradas de audio:	Nee
Salida de audio:	Nee
Material:	Aluminium
Tipo de comida:	USB
conexión USB:	Ja
LED de encendido:	Ja
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	1
Sistemas operativos compatibles:	- MS Windows 2000/XP/Vista/7\n- Mac OS ab 10.3\n- Linux
Tipo de caso:	Hoes
tipo de cable:	USB 3.0
Dimensiones (Ancho x Fondo x Alto):	77 x 15 x 121 mm
Tamaño del disco de almacenamiento:	2.5 "
Tamaños de disco duro admitidos:	2.5 "
conjunto de chips:	OEM
Mando a distancia incluido:	Nee
Número de unidades de almacenamiento admitidas:	1
Bahías para unidades externas:	USB 3.0, USB 2.0, USB 1.1
Tipo-producto:	HDD-/SSD-behuizing
Factores de forma de placa base compatibles:	ATX
Conexiones de disco duro compatibles:	SATA
Tamaño de la placa principal:	2.5 "