Spring USA SM-300CR Manual de Usario

Spring USA horno SM-300CR

Lee a continuación 📖 el manual en español para Spring USA SM-300CR (8 páginas) en la categoría horno. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

The Unlimited

Induction Range

Item #: -300CRSM

Owner’s Manual

127 Ambassador Drive, Suite 147

Naperville, IL 60540-4079

P: 630- -527 8600

F: 630- -527 8677

springusa@springusa.com

www.springusa.com

The Evolution of Intelligent Design®

Aug 2020

The Evolution of Intelligent Design®

Electr

ElectrElectric

icical

alal

RReq

eqequir

uir

uiruire

eem

mme

een

nnts:

ts:

ts:ts:

Bef

BefBefor

orore

e e Y

YYou

ou ou Begin

Begin

BeginBegin

To ensure safe operation, read the following instructions in their

entirety.

Warning is used to indicate the presence of a hazard that can cause

severe personal injury, death, or substantial property damage if the

warning is ignored.

Caution is used to indicate the presence of a hazard that will or can

cause minor personal injury or property damage if the caution is

ignored.

NOTICE

Notice is used to note information that is important but not

hazard-related.

TTo

o o reduc

reduc

reducreduce

e e risk

risk

risk risk o

oof

f f injury

injury

injury injury or dam

or dam

or damor damage

age

age age to the

to the

to the to the equipm

equipm

equipmequipment:

ent:

ent:ent:

•Plug only into grounded electrical outlets matching the nameplate

rated voltage.

•Do not power the equipment with extension cords, power strips, or

multipurpose sockets.

•Equipment should only be used in a flat, level position.

•Do not obstruct or cover the equipment in any way when in use.

•Do not operate unattended.

•Do not leave an empty vessel on the equipment when in use.

•Closely supervise equipment operating in public areas and/or around

children.

•Do not operate if equipment has been damaged or is malfunctioning

in any way.

•Keep equipment and power cord away from open flames, electric

burners or excessive heat.

•Unplug equipment and let it cool before cleaning.

•Unplug when not in use.

ENGL

ENGLENGLISH

ISH

ISHISH Funct

Funct

FunctFunction

ion

ionion

Spring USA’s Unlimited Induction Range, item #SM-300CR, is a portable,

product holding range intended for countertop use. The range features

a durable, all-black housing with touch controls. The range has been

designed specifically to keep food warm. Food must be at or above

serving temperature before being placed on the range.

Item # Voltage Phase Hertz Watts Amps Plug

SM-300CR - 1 2.5 NEMA 5-110 120 60 300 15P

Inst

InstInstalla

alla

allaallatio

tio

tiotion

Inspect all parts of the induction range prior to installation and use. If

the unit is damaged, do not use. Contact a supplier for a replacement.

Ensure the installation location has dedicated power. The Unlimited

Induction Range can be used as a countertop unit or built-in unit.

To prepare the induction range for countertop use, simply place the

unit on a flat, level surface. There must be at least 1.2” (3 cm) of space

available around the induction range for proper ventilation on the

countertop.

NOTICE: The induction range only maintains temperature it –

does not cook or continue to cook food.

Dais

DaisDaisy

y y Chaini

Chaini

ChainiChaining

ngng:

The Unlimited Induction Range has a built-in receptacle located in the

back of the unit that allows for daisy chaining. The maximum number of

Unlimited Range units allowed for daisy chaining into one 15-amp/120-

volt circuit is 5

55 units.

units.

units.units.

To install the induction range as a built-in unit follow the below steps:

1. Ensure the installation location has proper ventilation. There must

be at least 7” of available space under the mounted induction range

and the inside temperature of the cabinet must not exceed

90°F/32°C.

4 5

NOTICE: Countertop thickness must not exceed 2.0”.

Figure

Figure Figure 1. Control

1. Control

1. Control 1. Control Panel

Panel

Panel Panel Re

ReRemo

momoval

val

valval

2. Remove the control panel from

the body of the induction range.

Simply pull the panel straight out

by the bottom corners of the

panel. See Figure 1 for reference.

The control panel will be

mounted separately for easy

access.

3. Position the provided template in the intended installation location,

allowing a minimum of 4” of countertop space on each side of the

induction range. Cut the countertop using the template.

4. Insert the induction range into the cutout. The induction range will

sit 0.4” (10 mm) above the surface of the countertop. Apply a thin

bead rubber silicone sealant around the surface perimeter of 100%

of the mounted induction range.

5. To mount the control panel, position the provided template aon

plane or panel perpendicular to the induction range. Center the

control panel to the induction range whenever possible. Cut the

intended surface using the template.

6. Insert the control panel into the cutout and secure with (4)

mounting screws.

7. Connect the control panel cable the induction range.to

Oper

OperOpera

aati

tition

onon

To operate the induction range, induction-ready vessels must be used.

•Glass serving vessels are not suited for use on the induction range.

•Vessels must have a flat base in order to make full contact with the

range. Vessels that are footed, or that have a raised ridge, are not

suited for the induction range.

•Vessels must have a base diameter greater than 4.7”.

Follow the below steps for operating the induction range:

1. Plug in the unit. Press the ON/OFF button.

2. Place the vessel on the induction range surface.

3. The LED lights above each setting will blink until a setting is pressed

4. Press the desired setting button. See the below chart for

temperature ranges.

NOTICE:

Spring USA induction servers and induction ranges are

designed to work together as a system. Optimal

performance is achieved by using Spring USA

components in conjunction with each other. Spring USA

cannot guarantee the performance of facsimile products

offered by other companies.

NOTICE:

As a safety feature, if no induction ready vessel is placed

on the surface after 2.5 minutes, the unit will shut off.

Low Low-Med Med-High High

145-155°F 156-165°F 166-175°F 176-185°F

62-68°C 69-73°C 74-79°C 80-85°C

Especificaciones del producto

Marca:	Spring USA
Categoría:	horno
Modelo:	SM-300CR
Color del producto:	Zwart
Peso.:	31000 g
Ancho:	600 mm
Profundidad:	438 mm
Altura:	88 mm
Nivel de ruido:	45 dB
factor vorm:	Rackmontage
Número de puertos USB 2.0:	1
Certificación:	CE, WEEE
Puerto RS-232:	1
Tiempo de respuesta:	10 ms
Potencia de salida:	2000 W
Batería/Tiempo de carga de la batería:	4 uur
Protección de voltaje de energía:	Overload, Short circuit
Frecuencia:	50 Hz
Protección de sobrecarga:	Ja
Eficiencia:	97 procent
Capacidad del bastidor:	2U
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	0 - 90 procent
Tipo-de-visualización:	LCD
Número de salidas de CA:	- AC-uitgang(en)
Tensión de entrada nominal:	162-290 V
Funciones de protección contra olas:	Modem, Network
Capacidad de potencia de salida:	3.35 kVA
Voltaje de operación de entrada (min):	162 V
Tensión de operación interna (máx.):	290 V
Tensión de operación de salida (min):	220 V
Tensión de funcionamiento de salida (máx.):	220 V
Tiempo típico de respaldo con carga completa:	30 min
Batería de intercambio en caliente:	Ja
Tensión de red, en funcionamiento:	220 V
Número de puentes IEC de salida:	11