Spring USA SM-651R Manual de Usario

Spring USA horno SM-651R

Lee a continuación 📖 el manual en español para Spring USA SM-651R (4 páginas) en la categoría horno. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Buffet

Induction

Cookware

The Evolution of Intelligent Design®

Spring USA

127 Ambassador Drive

Suite 147

Naperville, IL 60540-4079

Phone: (1) 630-527-8600

Fax: (1) 630-527-8677

Email: springusa@springusa.com

Web: www.springusa.com

Installation

& Operation

Manual

Model: SM-651R & SM-653R

(International Plug)

Before You Begin:

www.springusa.com

Stainless Steel Multi-Ply

Cookware

Carbon Steel Aluminum Cookware with

Induction Disc Cast Iron

Suitable Serving Ware:

Convertible Buffet Servers

Your MAX Induction

Warmer works with induction-ready serving vessels.

Visit the Spring USA Website for a full line of induction-ready, profes-

sional serve ware.

Serving pieces must have a flat bottom, in order to make full contact with

the countertop.

Serving pieces that are footed, or that have a raised ridge, are not for use on

this system, as they cannot make full contact with the counter surface.

Vessels must have a diameter greater than 9”.

Glass Cookware is not suited for use on your induction warming system.

Serving vessels must be centered on the induction warmer for optimal

heating and performance.

Aluminum Tray With Induction

Disk

Read the following instructions in their entirety. Use proper serving

vessels. All serving vessels must be induction-ready.

Your MAX Induction

Warmer must have proper ventilation in order to

operate correctly. There must be at least 7” of space available under a

mounted induction warmer. Cabinets housing the induction warmers

should have intake & exhaust vents. For optimal performance, the inside

temperature of the cabinet should not exceed 90°F / 32° C.

Ensure that you have dedicated power to the installed location. Each induc-

tion warmer will draw 5.4 Amps (International Model will draw 2.7 Amps).

Induction Range Error Codes:

Error Cause Solution

4 Flashing

Lights on

Control Panel

Range does not detect a pan on the

range.

Place an induction ready pan on the

range.

Low & Med-

High Lights

Flashing

Overheating protection has been

activated & the range has been

shut down.

Remove the cookware from the

range. Let the unit cool down, then

restart. Make sure the cookware

you are using is induction ready.

Low & High

Lights Flash-

ing

Range is experiencing temporary

voltage overload.

Let the induction range cool down

completely, before restarting. Re-

view dedicated power requirements

on page one of this manual.

Low & Low-

Med Lights

Flashing

Range has overheated due to

blocked ventilation and has shut

down the range.

Clear vents, let range cool down,

then restart. If error message con-

tinues, your range needs to be ser-

viced.

Safety Precautions & Key Points:

Cabinet Ventilation must be provided. The inside temperature of the

cabinet must not exceed 90°F / 32° C. Regularly inspect air intake grill on

underside of ranges. Clean by vacuuming, as needed. The ventilation areas

into and out of the cabinet should be provided. Active ventilation may be

necessary dependent on cabinet design.

Actual range temperatures may vary due to a number of variables such as

ambient temperature in the immediate surrounding area, content and volume

of food being heated or cooked, and whether or not you are utilizing a cover

on the vessel you are using.

Never attempt to service any part of your MAX Induction® Range on your

own. Contact our Service Department by calling (1) 630-527-8600.

Attempting to service your Induction Range on your own, or through an

unauthorized repair facility automatically voids your warranty. For service

forms, visit the Spring USA Website.

For Limited Warranty Information, visit www.springusa.com

Note:

This equipment uses, generates and can radiate radio frequency energy. If

not installed correctly and used in accordance with the instructions, may

cause harmful interference to radio communications. Users or guests with

Pacemakers should contact their health care professional prior to using this

product.

Mounting The Control Panel:

To mount the Control Panel (B), use the template provided.

Place the template on a plane or panel, perpendicular to the MAX

Induction® Range, centering it to the range whenever possible.

The Control Panel cutout should measure 5-¾”x 2-¾”.

Place the Control Panel (B) into cutout hole. Using the four (C) wood

screws (provided) Secure the Control Panel into place.

Mounting The Control Panel:

Testing Your MAX Induction® Range:

Turn on the Induction Range and set the temperature to Med-High.

The red LED light should begin to blink.

Set a Stainless steel pan or server filled with water on top of the granite

directly over the induction range mounted underneath. The blinking LED

light should go solid. This means the induction range is reading the pan.

Get the most out of your range. Always use induction-ready cookware.

See the Spring USA Website for a full line of induction-ready profes-

sional cookware.

Model # Voltage / Amps Peak Power Plug Type

SM-651R 110-120 Volts / 5.4 Amps 650 Watts 50-60 Hz NEMA 5-15

SM-653R 230-240 Volts / 2.7 Amps 650 Watts 50-60 Hz CEE-7 Euro Plug or

BS 1363 UK Plug

www.springusa.com

(1) 630-527-8600

How To Operate:

www.springusa.com

Your MAX Induction® Range has been designed specifically to keep

foods warm. Your SM-651R Induction Range is a Warming or

‘Hold-Only’ Induction Unit.

Foods must be at serving temperature, or above, before placing into

serving vessels.

To Begin:

 Press the On/Off Button, the unit will default to Med-High.

 An LED light will indicate which temperature setting the range is op-

erating in (based on the chart shown below).

 To change the temperature of the warming range, press the corre-

sponding button for the temperature you are trying to obtain

 Your induction range will continue to warm until the set temperature

is reached

 Once the set temperature has been reached, the unit will maintain at

that temperature

 If the induction range senses a drop in temperature of the vessel

placed on top of it, it will start heating again, until the set temperature

is obtained

 As a safety feature, your induction range will automatically shut

down if a vessel is not placed on it after two and a half minutes

 Temperature ranges of your induction warming unit are as follows:

Note:

Our Induction Warming Ranges have been designed and tested using

Spring USA Professional Cookware and Vessels. Spring USA cannot

guarantee the performance of other Vendors’ equipment being used with

our MAX Induction

Ranges.

145 - 155° F 156 - 165° F 166 - 175° F 176 - 185° F

61 - 71° C 72 - 76° C 77 - 82° C 83 - 87° C

Low Low-Med Med-High High

(1) 630-527-8600

Especificaciones del producto

Marca:	Spring USA
Categoría:	horno
Modelo:	SM-651R
Color del producto:	Zwart
Peso.:	1000 g
Ancho:	32 mm
Profundidad:	192 mm
Altura:	120 mm
Fuente de alimentación:	100-240V, 50-60Hz, 0.8A
Indicadores LED:	Ja
Lector de tarjetas de memoria integrado:	Nee
Material:	Aluminium
Adaptación externa:	Ja
Tamaño del disco de almacenamiento:	3.5 "
Interfaces de unidad de almacenamiento compatibles:	SATA
Ratio de transferencia:	5 Gbit/s
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1):	1
Número de unidades de almacenamiento admitidas:	1
Número de puertos eSATA:	1