SPT SF-16T07 Manual de Usario

SPT Ventilador SF-16T07

Lee a continuación 📖 el manual en español para SPT SF-16T07 (6 páginas) en la categoría Ventilador. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Version 1.0 2015
Attention: Pictures in the IM are for reference only.
OWNER’S MANUAL
16” Stand Fan
Model: SF-16T07
READ AND SAVE THESE INSTRUCTIONS
2
1. Never insert ngers, pencils, or any other object through the grille when fan is
running.
2. Disconnect fan when moving from one location to another.
3. Disconnect fan when removing grilles for cleaning.
4. Be sure fan is on a stable surface when operating to avoid overturning.
5. DO NOT use fan in window. Rain may create electrical hazard
1. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to t in a polarized outlet
only one way. If plug does not t fully in the outlet, reverse the plug. If it still
does not t, contact a qualied electrician. Do not attempt to defeat this safely
feature.
2. To reduce the risk of re or electric shock, do not use this fan with any solid state
speed control device.
3. Do not leave the fan running unattend.
WARNING
PART FIGURE
RULES FOR SAFE OPERATION
Read Rules for Safe Operation and Instructions Carefully.
CAUTION
L-shape Bolt
Chassis
Fasten
Tighten
Loosen
Touch key
Spinner
Extension Pole
Internal Pole
Fan Blade Plastic nut
Rear Grill
Motor
shaft Motor Housing
Front Grill
Thumb Screw
Height
adjustment ring
Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between
the real object and the illustration in the drawing shall be subject to the real subject.
3
1. Unscrew the L-shape Bolt from bottom of the Extension Pole. (Fig.1)
2. Insert extension pole into the chassis, replace and tighten the L-shape Bolt. (Fig.2)
3. Loosen the height adjustment ring located on the extension and adjust the internal
pole to desired height. (Note: If you don’t see the internal pole, it is inside the
extension pole, simply pull it out.) (Fig.3)
4. Attach the head unit to the internal pole: loosen the thumb screw on the bottom
of the head unit. Place the head unit on the internal pole and tighten the thumb
screw in alignment with the groove on the internal pole. (Fig.4)
CAUTION: Height adjustment ring must be fully fastened before the assembly of the
motor section to the internal pole.
ASSEMBLY OF CHASSIS & COLUMN UNIT
Annular groove
Thumb screw
Loosen
Fig. 1 Fig. 2
Fig. 3 Fig. 4
1. Unscrew the spinner clockwise (this part may be packed separately in bag)
and unscrew plastic nut counterclockwise to remove. Fix the rear grill onto the
motor shaft, replace plastic nut and turn clockwise to tighten. (Fig. 5)
2. Insert the blade onto the shaft - make sure the rotor shaft pin is fitted into the
groove on the blade. Turn the spinner counterclockwise to tighten blade. (Fig. 6)
3. Fix the front grill to the rear grill and secure with the grill clip. (Fig. 7)
GRILL & FAN BLADE ASSEMBLY
Blade Set Clip
Fig.5 Fig.6 Fig.7

Especificaciones del producto

Marca: SPT
Categoría: Ventilador
Modelo: SF-16T07

¿Necesitas ayuda?

Si necesitas ayuda con SPT SF-16T07 haz una pregunta a continuación y otros usuarios te responderán




Ventilador SPT Manuales

Ventilador Manuales

Últimos Ventilador Manuales