SRS DS360 Manual de Usario
Lee a continuación 📖 el manual en español para SRS DS360 (140 páginas) en la categoría Generador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/140
DS360 Ultra Low Distortion Function Generator Revision 2.9 (09/2021)
Operating Manual and
Programming Reference
Model DS360
Ultra Low Distortion
Function Generator
1290-D Reamwood Avenue
Sunnyvale, CA 94089 U.S.A.
Phone: (408) 744-9040, Fax: (408) 744-9049
email: info@thinkSRS.com • www.thinkSRS.com
Copyright © 1999, 2007, 2008, 2011, 2012, 2013, 2016, 2018, 2020, 2021 by SRS
All Rights Reserved
Certification
Stanford Research Systems certifies that this product met its published specifications at the time
of shipment. Stanford Research Systems further certifies that its calibration measurements are
traceable to the United States National Institute of Standards and Technology (NIST).
Warranty
This Stanford Research Systems product is warranted against defects in materials and
workmanship for a period of one (1) year from the date of shipment.
Service
For warranty service or repair, this product must be returned to a Stanford Research Systems
authorized service facility. Contact Stanford Research Systems or an authorized representative
before returning this product for repair.
Information in this document is subject to change without notice.
Copyright © Stanford Research Systems, Inc.,
1999, 2007, 2008, 2011, 2012, 2013, 2016, 2018, 2020, 2021
All rights reserved.
Stanford Research Systems, Inc.
1290-D Reamwood Avenue
Sunnyvale, California 94089
Printed in USA
i
DS360 Ultra Low Distortion Function Generator
Safety and Preparation for Use
WARNING!
Dangerous voltages, capable of causing injury or death, are
present in this instrument. Use extreme caution whenever the
instrument is cover is removed. Do not remove the cover while
the unit is plugged in to a live outlet.
Caution
This instrument may be damaged if operated with the LINE VOLTAGE SELECTOR set
for the wrong AC line voltage, or if the wrong fuse is installed.
Line Voltage Selection
The DS360 operates from a 100, 120, 220 or 240 Vrms AC power source having a line
frequency of 50 or 60 Hz. Before connecting the power cord to a power source, verify
that the LINE VOLTAGE SELECTOR, located in the rear panel fuse holder, is set so
that the correct AC input voltage is visible.
Conversion to other AC input voltages requires a change in the fuse holder voltage card
position and fuse value. Disconnect the power cord, open the fuse holder cover door and
rotate the fuse-pull lever to remove the fuse. Remove the small printed circuit board and
select the appropriate operating voltage by orienting the printed circuit board so that the
desired voltage is visible when pushed firmly into its slot. Rotate the fuse-pull lever back
into its normal position and insert the correct fuse into the fuse holder.
Line Fuse
Verify that the correct fuse is installed before connecting the line cord. For 100/120
VAC, use two ½ Amp fuses and for 220/240 VAC use two ¼ Amp fuses.
Line Cord
The DS360 has a detachable, three-wire power cord for connection to the power source
and to a protective ground. The exposed metal parts of the instrument are connected to
the outlet ground to protect against electrical shock. Always use an outlet which has a
properly connected protective ground.
Power Switch
The power switch is located on the front panel of the unit, in the lower right hand corner.
Turn on the unit by pressing the switch in.
Fan
The fan in the DS360 is required to maintain proper operation. Do not block the vents in
the chassis or the unit may not operate properly.
Especificaciones del producto
| Marca: | SRS |
| Categoría: | Generador |
| Modelo: | DS360 |
¿Necesitas ayuda?
Si necesitas ayuda con SRS DS360 haz una pregunta a continuación y otros usuarios te responderán
Generador SRS Manuales
19 Agosto 2024
Generador Manuales
- Generador Bosch
- Generador Philips
- Generador DeWalt
- Generador Honeywell
- Generador Vetus
- Generador Ferm
- Generador Eurom
- Generador Generac
- Generador Subaru
- Generador Ozito
- Generador Gude
- Generador Makita
- Generador Black And Decker
- Generador Innoliving
- Generador Stanley
- Generador Hyundai
- Generador Westinghouse
- Generador Moulinex
- Generador Taurus
- Generador Parkside
- Generador Sun Joe
- Generador Einhell
- Generador Voltcraft
- Generador Craftsman
- Generador Zephyr
- Generador Powerplus
- Generador Trotec
- Generador Scheppach
- Generador Honda
- Generador Powerfix
- Generador CAT
- Generador Bavaria
- Generador Simpson
- Generador Gys
- Generador Zipper
- Generador Harvia
- Generador Defort
- Generador Superior
- Generador Fuxtec
- Generador Truper
- Generador Cocraft
- Generador Cecotec
- Generador Herkules
- Generador Toolcraft
- Generador Lumag
- Generador Telair
- Generador Endress
- Generador GW Instek
- Generador EcoFlow
- Generador Powerspot
- Generador Black Decker
- Generador Bluetti
- Generador Anova
- Generador Global
- Generador King Craft
- Generador Zgonc
- Generador AudioControl
- Generador Duromax
- Generador CrossTools
- Generador Jackery
- Generador Blodgett
- Generador Lifan
- Generador Rigol
- Generador Robin America
- Generador Cleveland
- Generador Joy-it
- Generador Aim TTi
- Generador Swiss Kraft
- Generador Full Boar
- Generador Duro Pro
- Generador Alpha Tools
- Generador Powerkick
- Generador EizenKraft
- Generador Könner & Söhnen
- Generador Load Up
- Generador Sunbird Solar
- Generador Solaaron
- Generador PowerTech
- Generador Woods
- Generador A-iPower
- Generador Stromkraft
- Generador ITC Power
- Generador MSW
- Generador Ribimex
- Generador Powerhouse
- Generador Arvey
- Generador Tektronix
- Generador PRAMAC
- Generador DuroStar
- Generador ThermaSol
Últimos Generador Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
25 Octubre 2024
17 Octubre 2024
12 Octubre 2024
10 Octubre 2024
3 Octubre 2024
2 Octubre 2024