Stairville C-Clamp Manual de Usario

Lee a continuación 📖 el manual en español para Stairville C-Clamp (1 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Thomann GmbH
Hans-Thomann-Str. 1 • 96138 Burgebrach
Germany • www.thomann.de
DocID: 171852_404343_08.02.19
EN
The C-clamp is intended for use on trusses with a tube diameter of 30 mm
to a maximum of 52 mm. Use the device only as described. Any other use
or use under other operating conditions is considered to be improper and
may result in personal injury or property damage. No liability will be as-
sumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are not within reach of
babies and young children. Choking hazard! Ensure that children
do not detach any small parts (e.g. knobs or the like) from the unit.
They could swallow the pieces and choke! Never let children unattended
use electrical devices.
Die tightening power of the C-clamp-bolt on the truss should be
about 20N. Do not keep using the C-clamp if it shows damages.
Check every 30 days, whether the C-clamp is still sitting rmly on the
truss. Tighten the screws again rmly if necessary. Make sure that the
C-clamp is not exposed to moisture for a longer period of time.
For the transport and protective packaging, environmentally
friendly materials have been chosen that can be supplied to normal
recycling. Ensure that plastic bags, packaging, etc. are properly dis-
posed of. Do not just dispose of these materials with your normal house-
hold waste, but make sure that they are collected for recycling. Please fol-
low the notes and markings on the packaging.
9C-clamp for stage lighting
950kg max. working load
9175mm × 90mm × 25mm
9also available in black
C-Clamp
50kg working load
Construction and mounting:
The C- clamp is made of 25mm × 6mm cold-rolled steel.
The truss protection spring is attached by two iron rivets at the C-clamp. A wing nut M10 x 25 is used to secure the
C-clamp to the truss.
For fastening of the lighting xture, a screw M10 × 35 is used with appropriate nut M10, a 10 mmat washer and a 10 mm
spring washer.

Especificaciones del producto

Marca: Stairville
Categoría: No categorizado
Modelo: C-Clamp

¿Necesitas ayuda?

Si necesitas ayuda con Stairville C-Clamp haz una pregunta a continuación y otros usuarios te responderán




No categorizado Stairville Manuales

No categorizado Manuales

Últimos No categorizado Manuales