Stanley FMC770 Manual de Usario

Stanley Radio FMC770

Lee a continuación 📖 el manual en español para Stanley FMC770 (35 páginas) en la categoría Radio. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/35

www.stanley.eu FMC770

ENGLISH

(Original instructions)

Intended use

Your Stanley Fat Max FMC770 Radio has been designed for

Listening to Radio Transmissions. This appliance is intended

for professional and private, non professional users.

Safety instructions

General safety warnings

@Warning! Read all safety warnings and all

instructions. Failure to follow the warnings

and instructions listed below may result in

injury.

u Read all of this manual carefully before using the

appliance.

u The intended use is described in this manual. The use of

any accessory or attachment or the performance of any

operation with this appliance other than those

recommended in this instruction manual may present a

risk of personal injury.

u Retain this manual for future reference.

Using your appliance

u Always take care when using the appliance.

u The appliance is not to be used as a toy.

u Use in a dry location only. do not allow the appliance to

become wet.

u Do not immerse the appliance in water.

u Do not open body casing. There are no user serviceable

parts inside.

u Do not operate the appliance in explosive atmospheres,

such as in the presence of ammable liquids, gases or

dust.

u To reduce the risk of damage to plugs and cords never

pull the cable to remove the plug from a socket outlet.

u The ventilation should not be impeded by covering the

ventilation openings with items, such as newspapers,

table-cloths, curtains, etc.;

u No naked ame sources, such as lighted candles, should

be placed on the apparatus;

u Attention should be drawn to the environmental aspects of

battery disposal;

u The use of apparatus in tropical and/or moderate climates.

After use

u When not in use, the appliance should be stored in a dry

place.

u Children should not have access to stored appliances.

u When the appliance is stored or transported in a vehicle it

should be placed in the boot or restrained to prevent

movement following sudden changes in speed/direction.

Inspection and repairs

u Before use, check the appliance for damaged or defective

parts. Check for breakage of parts, damage to switches

and any other conditions that may affect its operation.

u Do not use the appliance if any part is damaged or

defective.

u Have any damaged or defective parts repaired or replaced

by an authorized repair agent.

u Never attempt to remove or replace any parts other than

those specied in this manual.

Safety of others

u This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

This product contains a coin/button cell battery.

@Warning! Keep out of reach of children.

Swallowing can lead to chemical burns,

perforation of soft tissue and death. Severe

burns can occur within 2 hours of ingestion.

Seek medical attention immediately.

u Children must be supervised to ensure that they do not

play with the appliance.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving parts.

u Injuries caused when changing any parts, blades or

accessories.

u Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

u Impairment of hearing.

u Health hazards caused by breathing dust developed when

using your tool (example:- working with wood, especially

oak, beech and MDF).

Labels on appliance

The following warning symbols are found on the appliance

along with the date code:

To reduce the risk of injury, the user must read

the instruction manual.

765432

9 10

11 12 13 14

ENGLISH (Original instructions)

ENGLISH

(Original instructions)

Additional safety instructions for batteries and

chargers

Batteries (not supplied)

u Never attempt to open for any reason.

u Do not expose the battery to water.

u Do not store in locations where the temperature may

exceed 40 °C.

Warning! batteries (battery pack or batteries installed) shall

not be exposed to excessive heat such as sunshine, re or the

like.

u Charge only at ambient temperatures between 10 °C and

40 °C.

u When disposing of batteries, follow the instructions given

in the section "Protecting the environment".

u Do not damage/deform the battery pack either by puncture

or impact, as this may create a risk of injury and re.

u Do not charge damaged batteries.

u Under extreme conditions, battery leakage may occur.

When you notice liquid on the batteries Carefully wipe the

liquid off using a cloth. Avoid skin contact.

u In case of skin or eye contact, follow the instructions

below.

Warning! The battery uid may cause personal injury or

damage to property. In case of skin contact, immediately rinse

with water. If redness, pain or irritation occurs seek medical

attention. In case of eye contact, rinse immediately with clean

water and seek medical attention.

Caution! Danger of explosion if battery is incorrectly replaced.

Replace only with the Stanley FatMax battery.

Adapter

u Your adapter has been designed for a specic voltage.

Always check that the mains voltage corresponds to the

voltage on the rating plate.

Warning! Never attempt to replace the adapter unit with a

regular mains plug.

u Have defective cords replaced immediately.

u Do not expose the adapter to water.

u Do not open the adapter.

u Do not probe the adapter.

u The adapter must be placed in a well ventilated area when

being used.

Electrical safety

#Your adapter is double insulated; therefore no

earth wire is required. Always check that the

mains voltage corresponds to the voltage on the

rating plate. Never attempt to replace the adapter

unit with a regular mains plug.

Symbols on Adapter

Short circuit proof safety isolating transformer.

SMPS

The charger is intended for indoor use only.

Features

This appliance includes some or all of the following features.

1. Volume buttons

2. Power button

3. Mode button

4. Preset Toggle button

5. Set Preset button

6. Equalizer/Clock button

7. Bluetooth® button

8. Tune/Seek buttons

9. LCD display

10. Antenna

11. AC adapter port

12. 18v battery port

13. Auxillary port

14. Coin cell battery door

15. AC adapter

Use

remove plastic tab from the coin battery by pulling.

Operating the Radio

Your radio is equipped with memory capacity in order to store

the time and your selected preset channels. When the radio is

in the OFF position, this memory capacity is powered by one

coin cell battery that is included with the radio.

To Replace Coin Cell Battery

Warning! Do not ingest the battery, chemical Burn Hazard.

This product contains a coin/button cell battery. If the coin/

button cell battery is swallowed, it can cause severe internal

burns in just 2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using

the product and keep it away from children.

If you think batteries might have been swallowed or placed

inside any part of the body, seek immediate medical attention.

Warning! Danger of explosion if battery is incorrectly

replaced. When replacing battery, replace it with the same or

equivalent type CR2032. Observe correct polarity (+ and –)

when replacing batteries. Do not store or carry batteries so

that metal objects can contact exposed battery terminals.

Warning! To reduce the risk of serious personal injury, turn

tool off and disconnect radio from power source before

installing/changing battery.

u Remove the screw from the coin cell battery door (14).

Remove the door from the radio.

u Install the coin cell battery so that the writing on the

battery faces out away from the radio.

u Replace the battery door and tighten screw.

Note: To reset the LCD display (9), clock and pre-sets,

remove the coin cell battery and reinstall. Follow this

procedure if the screen seems to lock in place.

Power/Volume Adjustment

To operate as a corded product

Insert the AC adapter (15) into the AC adapter port (11), then

plug the adapter into an appropriate AC power outlet or

generator.

To operate as a cordless product

Insert a fully charged 18v Stanley FatMax battery (not

included) into the battery port (12). Be sure battery is fully

seated.

Switching on and off

u To switch the radio on, press the power button (2).

u To switch the radio off, press the power button again (2).

u Press the top volume button (1) to increase the volume. To

decrease the volume, press the bottom volume button.

Note: If the battery is attached to the radio and the AC adapter

is plugged in at the same time, the radio will run off the

adapter and not drain the battery. Having both attached

simultaneously will not charge the battery.

Mode Function

To choose one of the mode functions (FM, AM, AUX, or

Bluetooth®) push the mode button (3) until the desired

function is displayed on the LCD screen. For example, if the

radio is on FM, push the mode button two times to change to

AUX.

Tune or Seek Function

Tune

Press the top tune/seek button (8) to quickly move the tuner

up the frequency band. To move the tuner down the frequency

band, press the bottom tune/seek button.

Seek

Press and hold the top tune/seek button (8), then release to

quickly scan up the frequency band to the next available

station. Press and continue to hold the button to seek directly

to a desired station. Press and hold the bottom tune/seek

button (8), the release to quickly seek down the frequency

band.

Program the Clock

The clock can be programmed with the power on or off.

u Press and hold the equalizer/clock button (6) until the hour

numbers of the digital time ashe on the LCD display (9),

then release the equalizer/clock button.

u Press the tune/scan buttons (8) up or down to set the

hour.

u When the correct hour is set, press the equalizer/clock

button once so the minute numbers ash.

u Press the tune/scan buttons up or down to set the

minutes.

u If you do not press a button within 5 seconds, the clock

programming feature will automatically return to the

previous setting.

u The Clock is set once the numbers stop ashing.

Program the Presets

6 FM and 6 AM radio stations may be independently set. After

programming the buttons, pressing the “1-6” preset toggle

button (4) will instantly change the frequency to the preset

station.

Program the Channels

u Turn power on (2).

u Press the mode button (3) until the desired mode is

selected (AM or FM).

u Tune the radio to the desired station (see Tune or Scan

Function).

u Press and hold the set/preset button (5). The “Mem” icon

will ash in the LCD display (9).

u Press the “1-6” preset toggle button (4) to scroll through

the 6 presets.

u Once it displays the desired preset number, press the set/

preset button.

u Repeat steps 3 through 6 to set the other memory buttons.

Equalizer Button

Set bass and treble

u Press the equalizer/clock button (6) once. The base

equalizer will appear on the LCD display (9).

u Press the up and down volume buttons (1) to set the

desired bass level.

u Press the equalizer/clock button a second time to get to

the treble equalizer.

u Press the up and down volume buttons to set the desired

treble level.

u Press the equalizer/clock button a third time to exit.

Especificaciones del producto

Marca:	Stanley
Categoría:	Radio
Modelo:	FMC770
Color del producto:	Zwart
Peso.:	2880 g
Ancho:	378.5 mm
Profundidad:	258 mm
Peso del embalaje:	4720 g
Ancho del embalaje:	450 mm
Empaquetadura en profundidad:	160 mm
Altura del embalaje:	345 mm
Manual de usuario:	Ja
Bluetooth:	Nee
Diagonal de la pantalla:	15.6 "
Resolución:	1366 x 768 Pixels
Pantalla táctil:	Nee
Relación de aspecto original:	16:9
Frecuencia del procesador:	2.2 GHz
Familia de procesadores:	AMD Turion II Dual Core
Modelo de procesador:	M500
Número de núcleos de procesador:	2
Estándares wifi:	802.11b, 802.11g
factor vorm:	Clamshell
Incluye sistema operativo:	Windows 7 Home Premium
Tipo de enchufe de conexión:	3,5 mm
red LAN:	Ja
Cables suministrados:	AC
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	Memory Stick (MS), MMC, MS PRO, SD, xD
Guía de inicio rápido:	Ja
Tarjeta de garantía:	Ja
Incluye adaptador de CA:	Ja
País de origen:	China
luz de fondo LED:	Ja
Número de puertos USB 2.0:	3
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Puerto DVI:	Nee
Número de puertos Ethernet LAN (RJ-45):	1
Opción de montaje de bloqueo de cable:	Ja
Número de altavoces incorporados:	2
Salidas de auriculares:	2
Adaptador de CA, alimentación:	90 W
Micrófono incorporado:	Ja
Memoria interna:	4 GB
Medios de almacenamiento:	HDD
Duración de la batería/duración de la batería:	- uur
Tipo de memoria interna:	DDR2-SDRAM
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Tecnología de cableado:	10/100/1000Base-T(X)
Estándar de red:	IEEE 802.11b, IEEE 802.11g
Temperatura de almacenamiento:	-20 - 60 °C
Zócalo del procesador:	Socket S1
Hilos internos del procesador:	2
Caché del procesador:	1 MB
Tipo de caché del procesador:	L2
Fabricante del procesador:	AMD
Arquitectura del sistema operativo:	64-bit
Memoria interna máxima:	8 GB
Capacidad total de almacenamiento:	500 GB
Tipo de unidad óptica:	DVD Super Multi DL
Adaptador de gráficos incorporado:	Nee
Adaptador de gráficos separado:	Ja
Modelo de adaptador de gráficos integrado:	Niet beschikbaar
Teclado numérico:	Ja
Ventaja Intel® para pequeñas empresas (Intel® SBA):	Nee
Ranura para tarjeta inteligente:	Nee
Humedad de almacenamiento:	5 - 95 procent
Modelo de adaptador de gráficos discretos:	AMD Mobility Radeon HD 4530
Dispositivo señalador:	Touchpad
Teclas de Windows:	Ja
Marca de parlantes:	Altec Lansing
Diseño de memoria:	2 x 2 GB
Ranuras de memoria:	2x SO-DIMM
Factor de forma de memoria:	SO-DIMM
Área de imagen:	Glans
Altura operativa:	-15 - 3048 m
Altura en almacenamiento:	-15 - 12192 m
Memoria gráfica:	0.512 GB
El número de discos duros instalados.:	1
Capacidad del disco duro:	500 GB
Interfaz de disco duro:	SATA
Velocidad de rotación del disco duro:	5400 RPM
Número de puertos IEEE 1394/Firewire:	1
Tipo de puerto de carga:	DC-in ingang
Controladores suministrados:	Ja
Tipo CardBus Ranura PCMCIA:	Nee
Memoria máxima del adaptador de gráficos:	2.302 GB
Ranura para tarjeta Express:	Ja
Salida S/PDIF:	Nee
Altura (frente):	34 mm
Altura (trasera):	42 mm
Mando a distancia incluido:	Ja
LuzScribe:	Ja
Memoria interna máxima (64 bits):	8 GB
Cantidad de puertos eSATA/USB 2.0:	1
Conexión-de-micrófono:	3,5 mm
Wifi.:	Ja
Temperatura de funcionamiento (TT):	5 - 35 °C
Humedad relativa de funcionamiento (VV):	10 - 90 procent
Tipo-producto:	Notebook
Tecnología de batería:	Lithium-Ion (Li-Ion)
Número de celdas de batería:	6