StarTech.com BT52A Manual de Usario
Lee a continuación 📖 el manual en español para StarTech.com BT52A (2 páginas) en la categoría receptor bluetooth. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: November 10, 2020 5:25 PM
Product Diagram (BT52A)
Component Function
1DC 5V Port (micro
USB)
• Used to connect the to the Power Adapter
Audio Receiver.
2Optical Port • Used to connect an via Audio Device Toslink®
Cable Audio Receiver to the .
3Audio Out Port • Used to connect an via Audio Device 3.5 mm
Cable Audio Receiver to the .
4 LED Indicator (front)
• Flash Once: Audio Device Indicates that the is
powered and waiting to pair with a Bluetooth
Device.
• Solid: Bluetooth Device Indicates that a has
been paired with the .Audio Receiver
• Blinking: Bluetooth Device Indicates that the
is disconnected from the .Audio Receiver
Requirements
For the latest requirements, please visit www.startech.com/BT52A
Powering the Audio Receiver
1. Connect the to the on the and Universal Power Adapter DC 5V Port Audio Receiver
the other end to an .AC Electrical Outlet
2. The will ash once, Indicating that the is powered and LED Indicator Audio Device
waiting to pair with a .Bluetooth Device
Bluetooth® 5.0 Audio Receiver
Connecting the Audio Receiver
Analog
• Connect the (included) to the on the 3.5 mm Audio Cable Audio Out Port Audio
Receiver Audio In Port Audio Device and the other end to an on the (audio
receiver, etc.)
- or -
Connect the (included) to the on the 3.5 mm Audio Cable Audio Out Port Audio
Receiver RCA Breakout Cable and the other end to the (included). Then connect
both the left and right connectors on the to the left and right RCA Breakout Cable
Audio In Ports Audio Device on the .
Digital
• Connect the (sold separately) to the on the Toslink Cable Optical Port Audio
Receiver Optical Port Audio Device and the other end to an on the (audio receiver,
etc.)
Pairing with NFC Fast Connection
The is equipped with a standard NFC tag to allow for NFC pairing. Audio Receiver
NFC allows you to connect a to the by touching the Bluetooth Device Audio Device
Bluetooth Device Audio Receiverto the .
The maximum distance the can be from the is 66 ft Bluetooth Device Audio Receiver
(20 meters).
NOTE: Only one may be paired to the at a time.Bluetooth Device Audio Device
1. Ensure NFC is enabled on your . Check the device’s manual for Bluetooth Device
details.
2. Touch a to the top of the for 3 seconds.Bluetooth Device Audio Receiver
NOTE: If this is the rst time your has been paired you may receive Bluetooth Device
a message requesting access.
3. The is now paired, the will be solid and audio Bluetooth Device LED Indicator
from the will output through the connected .Bluetooth Device Audio Device
Disconnecting from your NFC Device
1. Touch the paired to the top of the for 3 seconds.Bluetooth Device Audio Receiver
2. The is now disconnected from the .Bluetooth Device Audio Device
123
4
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
ISED Statement
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) this device may not cause interference,
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 0.5cm between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm
Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International,
Ltd., registered in the United States and other countries.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
• Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Manually Pairing a Device
Note: If the instructions below do not match your , please refer to the owners Device
manual for your for further instructions. Device
1. From the , select . Host Bluetooth Device Settings
2. On the screen, select .Settings Bluetooth
3. Select the to activate the function.Sider Bluetooth
4. A list of enabled will appear. Select the from the Bluetooth Devices HD Receiver
list.
Reconnecting a Device
1. Move the back into the expectable range of the Bluetooth Device Audio Receiver
(66 ft or 20 meters).
2. Go back into the and select the Bluetooth Device’s Bluetooth Settings HD
Receiver from the list.
Especificaciones del producto
| Marca: | StarTech.com |
| Categoría: | receptor bluetooth |
| Modelo: | BT52A |
¿Necesitas ayuda?
Si necesitas ayuda con StarTech.com BT52A haz una pregunta a continuación y otros usuarios te responderán
receptor bluetooth StarTech.com Manuales
29 Agosto 2024
receptor bluetooth Manuales
- receptor bluetooth Aluratek
- receptor bluetooth Speed-Link
- receptor bluetooth Naxa
- receptor bluetooth T'nB
- receptor bluetooth Monoprice
- receptor bluetooth Vantec
- receptor bluetooth Wavemaster
Últimos receptor bluetooth Manuales
17 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
27 Agosto 2024
22 Agosto 2024
20 Agosto 2024
27 Julio 2024