StarTech.com IDE2SAT2 Manual de Usario

Lee a continuación 📖 el manual en español para StarTech.com IDE2SAT2 (2 páginas) en la categoría Disco duro (externo). Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
40-Pin IDE PATA to SATA Adapter Converter for HDD/SSD/ODD
StarTech ID: IDE2SAT2
The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA
33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep
your existing motherboard.
The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA
drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you
to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.
The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.
Applications
An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface
Ideal for use with older motherboards that do not support SATA
Features
Connect a SATA device to an IDE/ATA motherboard or controller card
Complete hardware solution; no software required
Support for 48-bit Logical Block Addressing (LBA)
Compliant with SATA revision 1.0 specification
Compatible with Ultra ATA 133 specification
Supports 2.5", 3.5", and 5.25" SATA Drives
ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives
Technical Specifications
Warranty 2 Years
Chipset ID Marvell - 88SA8852
Connector Type(s) 1 - IDE (40 Pin; EIDE/PATA)
Connector Type(s) 1 - SATA Data & Power Combo (7+15 pin)
Connector Type(s) 1 - SP4 (4 pin; Small Drive Power)
Maximum Data Transfer Rate 133MB/sec
Product Length 3 in [75.5 mm]
Product Width 0.8 in [20 mm]
Product Height 0.9 in [23 mm]
Product Weight 0.5 oz [15 g]
Operating Temperature 5°C to 50°C (40°F to 12F)
Storage Temperature -25°C to 80°C (-13°F to 17F)
Humidity 15~90% RH
System and Cable Requirements An IDE controller and ATA cable (not included).
Shipping (Package) Weight 0 lb [0 kg]
Included in Package 1 - IDE to SATA adapter
Included in Package 1 - LP4 Molex to SP4 Power Cable
Included in Package 1 - Instruction Manual
Certifications, Reports and Compatibility

Especificaciones del producto

Marca: StarTech.com
Categoría: Disco duro (externo)
Modelo: IDE2SAT2

¿Necesitas ayuda?

Si necesitas ayuda con StarTech.com IDE2SAT2 haz una pregunta a continuación y otros usuarios te responderán




Disco duro (externo) StarTech.com Manuales

Disco duro (externo) Manuales

Últimos Disco duro (externo) Manuales