StarTech.com NETRS232_2 Manual de Usario

StarTech.com Tarjeta/adaptador de red NETRS232_2

Lee a continuación 📖 el manual en español para StarTech.com NETRS232_2 (16 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/16
Rev. B05
NETRS232 Series
Quick Install tion & Advanced Features Guidea
Congratulations on your purchase of a StarTech NETRS232. NETRS232s connect serial
devices to Ethernet networks. Any serial device—POS equipment, factory machinery,
monitoring hardware, or security devices, for example—can send its information to the
NETRS232.The NETRS232 places the serial data in a TCP/IP wrapper and sends it out its
Ethernet port.Data moving the other direction,from the Ethernet side of the
NETRS232 to the serial device, undergoes the same process in reverse.StarTech
NETRS232s use industry-standard hardware interfaces and are supported in Windows®
2000,Windows® XP, Linux, and QNX.
• Network serial devices
• Make devices available to multiple users
• Manage multiple serial devices from a single PC
• Eliminate long dedicated serial runs
• Stop using costly PCs as dedicated serial port servers
• Remotely access and control serial devices
• Eliminate long-distance phone-modem charges
With a NETRS232, you can:
Included with your package, you should have the following:
• StarTech NETRS232
• Power supply
• Installation diskette
• Quick Installation Guide
1
Getting Started
Please note! NETRS232 is factory pre-configured with passwords as follows:
Administrative password: admin
Port 1 password: port1
Port 2 password: port2
etc..
Before using NETRS232 you will need to unlock the unit using the
administrative password in order to configure the device's IP address and
other settings. We recommend changing the administrative password to
something other than the factory default for best security.
Port passwords can be removed or altered as needed, provided
administrative access is granted.
2
Hardware Setup
1. Connect the power supply to the NETRS232 and to AC power.
2. The power (red) LED will light to indicate that the unit is receiving power.
3. Connect a network cable to the RJ-45 jack of the NETRS232.The other end of the
network cable can be attached to either:
• an Ethernet hub or switch,using a length of standard Ethernet network cable
• a host PC directly, using an Ethernet cross-over cable.
Network status is indicated by two LEDs on the RJ-45 connector.The left (yellow) LED
indicates network activity. It is on by default, turning off when network activity occurs
at the NETRS232.The right (green) LED indicates a network link. It is off by default, but
lights when a network link exists.
4. Connect a serial device to the NETRS232.
Serial port activity is indicated by two status LEDs per port. The upper (yellow) LED
lights when the serial port is transmitting data.The lower (green) LED lights when the
serial port is receiving data.
Power
connector
Single Port Dual Port
Power
indicator
Network
connector (RJ-45)
Network
Activity and Link
indicators
Serial connector
(DB-9 shown)
Serial Tx
indicator
Serial Rx
indicator Serial 1
connector
(DB-9 shown)
Serial 2
connector
(DB-9 shown)
Serial Tx
indicators
Serial Rx
indicators

Especificaciones del producto

Marca: StarTech.com
Categoría: Tarjeta/adaptador de red
Modelo: NETRS232_2

¿Necesitas ayuda?

Si necesitas ayuda con StarTech.com NETRS232_2 haz una pregunta a continuación y otros usuarios te responderán


Tarjeta/adaptador de red StarTech.com Manuales

StarTech.com

StarTech.com ST1000SPEXD4T Manual de Usario

22 Octubre 2024
StarTech.com

StarTech.com ST1000SPEX2T Manual de Usario

3 Octubre 2024
StarTech.com

StarTech.com ST1000SPEX2LT Manual de Usario

3 Octubre 2024
StarTech.com

StarTech.com AF221CE-POE-INJECTOR Manual de Usario

1 Octubre 2024
StarTech.com

StarTech.com USB3LINK Manual de Usario

26 Septiembre 2024
StarTech.com

StarTech.com PCMACLINK2 Manual de Usario

26 Septiembre 2024
StarTech.com

StarTech.com PEX1000SFP Manual de Usario

26 Septiembre 2024
StarTech.com

StarTech.com ST2GPEX Manual de Usario

26 Septiembre 2024
StarTech.com

StarTech.com USB56KEM2 Manual de Usario

26 Septiembre 2024
StarTech.com

StarTech.com PUSBADAP Manual de Usario

26 Septiembre 2024

Tarjeta/adaptador de red Manuales

Últimos Tarjeta/adaptador de red Manuales

Cambium Networks

Cambium Networks CG52A Manual de Usario

26 Octubre 2024
Devolo

Devolo MicroLink dLAN duo Manual de Usario

16 Octubre 2024
Edimax

Edimax HP-5001K Manual de Usario

16 Octubre 2024
LevelOne

LevelOne FNC-0109TX Manual de Usario

14 Octubre 2024
Edimax

Edimax EW-7822ULC Manual de Usario

9 Octubre 2024
ZyXEL

ZyXEL AP Configurator Manual de Usario

6 Octubre 2024
Linksys

Linksys AE1000 Manual de Usario

6 Octubre 2024
Trendnet

Trendnet TEW-624UB Manual de Usario

5 Octubre 2024
Nec

Nec NP06LM Manual de Usario

4 Octubre 2024
Alecto

Alecto HPD-142 Manual de Usario

4 Octubre 2024