StarTech.com ST1000SPEX2T Manual de Usario

StarTech.com Tarjeta/adaptador de red ST1000SPEX2T

Lee a continuación 📖 el manual en español para StarTech.com ST1000SPEX2T (2 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 10, 2024

Product ID

ST1000SPEX2T / ST1000SPEX2LT / ST1000SPEXD4T

Port/LED/Connector Function

1Bracket

• Used to secure onto the Host Computer

• Low-Prole Bracket is included

Note: ST1000SPEX2LTships with the Low-Prole

bracket pre-installed

3 Ethernet Port • Used to connect a to the Network Cable Network

Card

2Link/Activity LED

Indicators

• Right LED: Link/Activity

• Solid green: Active link

• Flashing green: Activity

• O: No active link

• Left LED: Link Speed

• Solid green: 1Gbps link

• Solid orange: 10/100Mbps link

4PCIe p1-x1 Connector • Insert into a PCI Express Slot

PCI Express Gigabit Ethernet Network Card

Requirements

For the latest requirements, please visit:

www.startech.com/ST1000SPEX2T

www.startech.com/ST1000SPEX2LT

www.startech.com/ST1000SPEXD4T

• Computer with an available PCI Express Slot (x1, x2, x4, x8, or x16)

Package Contents

• PCIe Network Card x 1

• Low-Prole Bracket or Full-Height Bracket (ST1000SPEX2LT) x 1

• Quick-Start Guide x 1

Installation

Install the PCI Express Card

WARNING!

Static electricity can cause severe damage to PCI Express cards. Ensure proper

grounding before opening the computer case or touching the PCI Express card. Use

an Anti-Static Strap when installing any computer component. If an Anti-Static Strap

isn’t available, discharge built-up static electricity by touching a large grounded metal

surface for several seconds. Handle the PCI Express card by its edges, avoiding contact

with the gold connectors.

1. Turn o the and any that are connected to it (for Computer Peripheral Devices

example, , , etc.).Printers External Hard Drives

2. Unplug the from the back of the .Power Cable Computer

3. Disconnect any that are connected to the .Peripheral Devices Computer

4. Remove the from the . Consult the documentation that came Cover Computer Case

with the for details about how to do this safely.Computer

5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate

from the back of the . Consult the documentation that came with Computer Case

the for details about how to do this safely. This card works in PCI Express Computer

x1, x2, x4, x8, or x16 slots.

*Product may vary from image

*ST1000SPEX2T shown

Verify the Driver Installation

Windows

1. Navigate to the .Device Manager

2. Under Network Adapters Realtek PCIe GbE Family Controller, right-click and click

Properties.

3. Conrm that the is installed and working as expected.Driver

Linux

1. Run from the command line.lsmod | grep r8168

2. Verify that the is present in the command line. Driver

6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot

Bracket Computer Case to the back of the .

Note: If the PCI Express Card needs to be installed into a Small Form Factor or a

Low-Prole Desktop System, it may be necessary to replace the pre-installed standard

Full-Height Bracket with the included Low-Prole Bracket.

7. Return the back onto the .Cover Computer Case

8. Reconnect the to the back of the .Power Cable Computer

9. Reconnect all of the that were disconnected in .Peripheral Devices Step 3

10. Turn on the and .Computer Peripheral Devices

Install the Driver

1. Open an and navigate to:Internet Browser

www.startech.com/ST1000SPEX2T

www.startech.com/ST1000SPEX2LT

www.startech.com/ST1000SPEXD4T

2. Click the tab.Drivers & Downloads

3. Under , download the for the operating system.Driver(s) Driver

4. Extract the contents of the Driver Package

5. Execute the and follow the on-screen instructions to nish installing the Installer

Driver.

Linux

1. Extract the contents of the .Driver Package

2. Follow the installation instructions on the accompanying le.README.txt

Regulatory Compliance

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment to an outlet on a dierent circuit than the receiver.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority

to operate the device. If shielded interface cables are included with the product, or if additional components or accessories are

designated for use with the installation, they must be used to ensure compliance with FCC regulations.

ISED Statement / Déclaration d’ISED

CAN ICES-003(B) / NMB-003(B)

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

EU WEEE Directive

StarTech.com products must not be disposed of with household waste. StarTech.com

products must be disposed of at an authorized electrical and electronic equipment recycling

facility. By collecting and recycling waste, you help save natural resources and ensure that the

product is disposed of in an environmentally friendly and healthy way.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Especificaciones del producto

Marca:	StarTech.com
Categoría:	Tarjeta/adaptador de red
Modelo:	ST1000SPEX2T

¿Necesitas ayuda?

Si necesitas ayuda con StarTech.com ST1000SPEX2T haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Tarjeta/adaptador de red StarTech.com Manuales

StarTech.com ST1000SPEXD4T Manual de Usario

22 Octubre 2024

StarTech.com ST1000SPEX2T Manual de Usario

3 Octubre 2024

StarTech.com ST1000SPEX2LT Manual de Usario

3 Octubre 2024

StarTech.com AF221CE-POE-INJECTOR Manual de Usario

1 Octubre 2024

StarTech.com USB3LINK Manual de Usario

26 Septiembre 2024

StarTech.com PCMACLINK2 Manual de Usario

26 Septiembre 2024

StarTech.com PEX1000SFP Manual de Usario

26 Septiembre 2024

StarTech.com ST2GPEX Manual de Usario

26 Septiembre 2024

StarTech.com USB56KEM2 Manual de Usario

26 Septiembre 2024

StarTech.com PUSBADAP Manual de Usario

26 Septiembre 2024

Tarjeta/adaptador de red Manuales

Últimos Tarjeta/adaptador de red Manuales

Cambium Networks CG52A Manual de Usario

26 Octubre 2024

Devolo MicroLink dLAN duo Manual de Usario

16 Octubre 2024

Edimax HP-5001K Manual de Usario

16 Octubre 2024

LevelOne FNC-0109TX Manual de Usario

14 Octubre 2024

Edimax EW-7822ULC Manual de Usario

9 Octubre 2024

ZyXEL AP Configurator Manual de Usario

6 Octubre 2024

Linksys AE1000 Manual de Usario

6 Octubre 2024

Trendnet TEW-624UB Manual de Usario

5 Octubre 2024

Nec NP06LM Manual de Usario

4 Octubre 2024

Alecto HPD-142 Manual de Usario

4 Octubre 2024