StarTech.com PEX40GQSFDPI Manual de Usario

StarTech.com Tarjeta/adaptador de red PEX40GQSFDPI

Lee a continuación 📖 el manual en español para StarTech.com PEX40GQSFDPI (2 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 10/06/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/PEX40GQSFDPI.

Package contents

• 1 x network card

• 1 x low-prole bracket

• 1 x quick-start guide

Requirements

• PCI Express® enabled computer with an available PCI Express slot

(x8 or x16)

• One 40G QSFP+ transceiver module

• Any of the following operating systems:

• Windows® 10

• Windows 8.1

• Windows 8

• Windows 7

• Windows Server® 2016

• Windows Server 2008 R2

• Windows Server 2012

• Linux® kernel 2.6.32 to 4.1.1. (64-bit) LTS Versionsx

• Phillips type screwdriver (optional)

Requirements are subject to change. For the latest requirements,

please visit www.StarTech.com/PEX40GQSFDPI.

PEX40GQSFDPI

Dual-Port QSFP+ Server Network Card - PCI Express - Intel Chip

*actual product may vary from photos

Install the low-prole bracket

The PEX40GQSFDPI can be mounted in both low-prole and

full-prole computer systems. The full-prole bracket comes

preinstalled in the QSFP+ network card, but you can install the

low-prole bracket instead.

1. Use a Phillips type screwdriver to remove the two bracket screws

from the PEX40GQSFDPI.

2. Remove the full-prole bracket from the QSFP+ network card.

3. Line up the low-prole bracket with the bracket holes on the back

of the QSFP+ network card.

4. Insert the two bracket screws that you removed in step 1 and

tighten them into place.

Install the network card in a computer

Warning! Network cards can be severely damaged by static

electricity. Make sure that you’re properly grounded before you

open your computer case or touch your PCIe card. You should wear

an anti-static strap when you install any computer component.

If an anti-static strap isn’t available, discharge any built-up static

electricity by touching a large, grounded metal surface for several

seconds. Only handle the PCIe card by its edges and don’t touch the

gold connectors.

1. Turn o your computer and any devices or peripherals that are

connected to it (for example, printers, external storage, and

so on).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

Product diagram

Mounting bracket

(full-prole pictured)

QSFP+ slot QSFP+ slot

Link or activity

LEDs

Bracket screw

PCIe p1-x8

connector

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

4. Open your computer case. For more information about how to

properly do this, consult the documentation that came with

your computer system.

5. Locate an open PCI Express x8 slot and remove the

corresponding metal cover plate from the back of your

computer case. Consult the documentation that came with your

computer for details about how to do this safely.

This card works in PCIe slots of x8 or x16 lanes.

6. Gently insert the card into the open PCI Express slot and use a

computer case screw (not included) to fasten the bracket to the

back of the case.

7. Place the cover back onto your computer case.

8. Insert a 40G QSFP+ transceiver module into the QSFP+ slot on

the QSFP+ network card.

Connect to a network

1. Connect a ber network cable to the QSFP+ transceiver module

on the QSFP+ network card and to a 40GBase ber port on your

network switch or device.

2. Reconnect the power cable to the back of your computer.

3. Reconnect all of your peripheral devices to your computer.

4. Turn on your computer.

About the LED indicators

The PEX40GQSFDPI features green link or activity LED indicators next

to the QSFP+ slots.

LED status Signicance

LED is illuminated Card is connected to the network

LED is blinking Activity is occurring

Install the driver

1. If the Found New Hardware dialog box appears on your screen,

close the dialog box or click Cancel.

2. Navigate to www.StarTech.com/PEX40GQSFDPI.

3. Click the tab.Support

4. Under , locate and download the drivers for the Driver(s)

operating system that you’re currently running.

5. When the download is complete, right-click the .zip folder that

you downloaded, and click .Extract All

6. Double-click the folder for the version of operating system that

you’re currently running, and follow the on-screen instructions to

complete the download.

7. When prompted to, restart your computer.

Troubleshooting

I can’t nd the PXE boot option

The PXE boot option isn’t supported on the PEX40GQSFDPI. As such,

you won’t see the PXE boot option in the menu.

Especificaciones del producto

Marca:	StarTech.com
Categoría:	Tarjeta/adaptador de red
Modelo:	PEX40GQSFDPI

¿Necesitas ayuda?

Si necesitas ayuda con StarTech.com PEX40GQSFDPI haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Tarjeta/adaptador de red StarTech.com Manuales

StarTech.com ST1000SPEXD4T Manual de Usario

22 Octubre 2024

StarTech.com ST1000SPEX2T Manual de Usario

3 Octubre 2024

StarTech.com ST1000SPEX2LT Manual de Usario

3 Octubre 2024

StarTech.com AF221CE-POE-INJECTOR Manual de Usario

1 Octubre 2024

StarTech.com USB3LINK Manual de Usario

26 Septiembre 2024

StarTech.com PCMACLINK2 Manual de Usario

26 Septiembre 2024

StarTech.com PEX1000SFP Manual de Usario

26 Septiembre 2024

StarTech.com ST2GPEX Manual de Usario

26 Septiembre 2024

StarTech.com USB56KEM2 Manual de Usario

26 Septiembre 2024

StarTech.com PUSBADAP Manual de Usario

26 Septiembre 2024

Tarjeta/adaptador de red Manuales

Últimos Tarjeta/adaptador de red Manuales

Cambium Networks CG52A Manual de Usario

26 Octubre 2024

Devolo MicroLink dLAN duo Manual de Usario

16 Octubre 2024

Edimax HP-5001K Manual de Usario

16 Octubre 2024

LevelOne FNC-0109TX Manual de Usario

14 Octubre 2024

Edimax EW-7822ULC Manual de Usario

9 Octubre 2024

ZyXEL AP Configurator Manual de Usario

6 Octubre 2024

Linksys AE1000 Manual de Usario

6 Octubre 2024

Trendnet TEW-624UB Manual de Usario

5 Octubre 2024

Nec NP06LM Manual de Usario

4 Octubre 2024

Alecto HPD-142 Manual de Usario

4 Octubre 2024