StarTech.com PM1115P3 Manual de Usario
StarTech.com
Servidor de impresión
PM1115P3
Lee a continuación 📖 el manual en español para StarTech.com PM1115P3 (2 páginas) en la categoría Servidor de impresión. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: March 22, 2024
Product ID
PM1115P3
Front View
Rear View
10/100Mbps Ethernet to Parallel Network Print Server
Components Function
1DC Power Port • Used to power the with the included 5V Print Server
1A Power Adapter
2RJ45 Port
• Used to connect the to a Print Server Network
• illuminates when connected at Left LED Yellow
10Mbps
• illuminates when connected at Right LED Green
100Mbps
3Status LED
• when power is supplied Flashes Yellow
• Turns when a network link has been Solid Yellow
established
4Reset Button
• to thePress once Restart Print Server
• for to send a Press and Hold 5 Seconds Test Page
to the connected Parallel Printer
• To restore the settings, Factory Default Press and
Hold 10 Seconds Releasefor , then
Note: The Reset Button is recessed. Use a ne object to
press it
5Parallel Port • used to connect to a Centronics 36-Pin Parallel Port
Parallel Printer
Requirements
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/PM1115P3
Package Contents
• Parallel Print Server x 1
• Power Adapter x 1
• Quick-Start Guide x 1
Default Network Settings
DHCP client: O
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
*Product may vary from image
321
5
4
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit dierent from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modication not expressly approved by the party responsible for compliance could void the user’s authority to
operate the device. Where shielded interface cables have been provided with the product or specied additional components
or accessories elsewhere dened to be used with the installation of the product, they must be used in order to ensure
compliance with FCC regulations.
Industry Canada (IC) Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) L’appareil ne doit pas produire de brouillage, et (2) L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
CE EMC/EMI
StarTech.com hereby declares that this device complies with the Electromagnetic Compatibility Directive (EMC).
A copy of the EU Declaration of Conformity is available at: under the Product Support tab
www.startech.com/PM1115P3
EU CE RoHS Environmental
StarTech.com hereby declares that this product complies with the Restriction of Hazardous Substances (RoHS) directive of the
European Parliament and the Commission Delegated Directive (EU).
A copy of the EU Declaration of Conformity is available at: under the Product Support tab.
www.startech.com/PM1115P3
EU REACH Declaration
This product complies with the Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) Regulation (EC)
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
FR
of the European Parliament and the Council. The product does not contain any of the Substances of Very High Concern (SVHC)
or Restricted Substances above the threshold values declared by the European Agency for Chemicals (ECHA) on their website’s
documented/maintained lists.
WEEE
StarTech.com products must not be disposed of together with domestic waste. StarTech.com products must be disposed of
at an authorized location for recycling electrical and electronic appliances. By collecting and recycling waste, you help save
natural resources and ensure that the product is disposed of in an environmentally friendly and healthy way.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are
the property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to .
www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Points de collecte sur www.quefairedemesdechets.fr
Privilégiez la répara�on ou le don de votre appareil !
FR
Cet appareil
et ses
accessoires
se recyclent
À DÉPOSER
EN MAGASIN À DÉPOSER
EN DÉCHÈTERIE
OU
Hardware Installation
1. Turn the .O Parallel Printer
2. Connect the to a with an appropriate Print Server Parallel Printer Centronics
36-pin Parallel Printer Cable Parallel Printer or direclty to the .
3. Turn the .On Parallel Printer
4. Connect an between the and a orRJ45 Ethernet cable Print Server Network Switch
Router.
Note: To congure the Print Server, the Host Computer must be on the same Network
and IP Address Range as the Print Server’s default IP Address.
For additional conguration of the Print Server consult the full manual online at
www.StarTech.com/PM1115P3
5. Plug the into the on the .Power Adapter DC Power Port Print Server
6. Wait until the has stopped ashing.Status LED
Especificaciones del producto
| Marca: | StarTech.com |
| Categoría: | Servidor de impresión |
| Modelo: | PM1115P3 |
¿Necesitas ayuda?
Si necesitas ayuda con StarTech.com PM1115P3 haz una pregunta a continuación y otros usuarios te responderán
Servidor de impresión StarTech.com Manuales
23 Septiembre 2024
18 Septiembre 2024
Servidor de impresión Manuales
- Servidor de impresión HP
- Servidor de impresión Airlive
- Servidor de impresión Edimax
- Servidor de impresión Sitecom
- Servidor de impresión Dymo
- Servidor de impresión Konig
- Servidor de impresión D-Link
- Servidor de impresión Hawking Technologies
- Servidor de impresión SEH
- Servidor de impresión Intellinet
- Servidor de impresión Silex
- Servidor de impresión Star
- Servidor de impresión EXSYS
- Servidor de impresión Atlantis Land
- Servidor de impresión Lantronix
Últimos Servidor de impresión Manuales
27 Octubre 2024
28 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
14 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
12 Septiembre 2024