StarTech.com PR22GI-NETWORK-CARD Manual de Usario

Lee a continuación 📖 el manual en español para StarTech.com PR22GI-NETWORK-CARD (2 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: February 16, 2023
Product Diagram (PR22GI-NETWORK-CARD)
Port/LED/Connector Function
1Bracket
Secures the card to the Host Computer Case
The comes pre-installedFull Prole Bracket
The is included Low Prole Bracket
22x Ethernet Ports Connect a to the Network Cable Network Card
Supports 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps
3LED Indicators
Right LED Indicator Link Speed is
Solid Green: 2.5 Gbps
Solid Amber: 1 Gbps
O: 100 or 10 Mbps
Left LED Indicator Link Status is
Solid Green: Active link
Flashing Green: Activity
4PCIe 2.0 p1-x2 Connector Insert into a on the PCI Express Slot Host Computer
2-Port 2.5GBase-T Ethernet Network Adapter Card - PCIe 2.0 x2
Package Contents
2-Port PCIe 2.5 Gbps Network Card x 1
Low Prole Bracket x 1
Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/PR22GI-NETWORK-CARD
Host Computer with an available PCI Express 2.0 or greater Slot (x2, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
Static Electricity PCI Express Cardscan severely damage . Ensure that you are
adequately before you open your or touch the Grounded Host Computer Case PCI
Express Card Anti-Static Strap Anti-Static Mat . You should wear an or use an when
installing any Host Computer component. If an isn’t available, Anti-Static Strap
discharge any built-up static electricity by touching a large Grounded Metal Surface
for several seconds. Only handle the by its edges and don’t touch PCI Express Card
the gold connectors.
1. Turn o the and any that are connected to it Host Computer Peripheral Devices
(e.g. printers, external hard drives, etc.).
2. Unplug the from the back of the .Power Cable Host Computer
3. Disconnect any that are connected to the .Peripheral Devices Host Computer
4. Remove the from the . Consult the documentation that Cover Host Computer Case
came with the for details about doing this safely.Host Computer
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of the . Host Computer Case
Note: Consult the documentation that came with the for details Host Computer
about doing this safely. This card works in PCI Express x2, x4, x8, or x16 Slots.
6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot
Bracket Host Computer Case to the back of the .
Note: If you install the into a or a PCI Express Card Small Form Factor Low Prole
Desktop System, it may be necessary to replace the pre-installed standard
Full Prole Bracket Low Prole Bracketwith the included .
24
1
3
*Product may vary from image
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two years warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Safety Measures
Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.
Mesures de Sécurité
Lisez tout le manuel et assurez-vous que vous comprenez les instructions avant de commencer à assembler et utiliser
ce produit.
安全対策
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。
Misure di Sicurezza
Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare
questo prodotto.
Säkerhetsåtgärder
Läs hela manualen och se till att du förstår instruktionerna innan du börjar montera och använda produkten.
Medidas de Seguridad
Lea todo el manual y asegúrese de haber comprendido bien las instrucciones antes de proceder con el ensamblaje y el
uso de este producto.
7. Return the onto the .Cover Host Computer Case
8. Reconnect the to the back of the .Power Cable Host Computer
9. Reconnect all of the disconnected in .Peripheral Devices Step 3
10. Turn on the and .Host Computer Peripheral Devices
11. Connect an to the (s).Ethernet Cable Ethernet Port
Download the Driver
1. Navigate to www.startech.com/PR22GI-NETWORK-CARD
2. Click the tab.Drivers & Downloads
3. Under , download the for Windows.Driver(s) Driver Package
Note: Windows usually saves the les to the Downloads folder associated with the user
account (e.g. C:\Users\useraccount\Downloads).
4. the zipped that was downloaded. Click . Right-click Driver Package Extract All
Follow the on-screen instructions to the les. Extract
Note: Ensure to make a note of the location where the drivers were extracted. That
location will be used in later steps.
5. Follow the instructions on the accompanying le for further Intel_Windows_DIG
Installation Instructions.
Verify the Driver Installation
Windows
1. Navigate to the .Device Manager
2. Under , right-click and click Network Adapters Intel Ethernet Controller I225-V
the option.Properties
3. Conrm that the is installed and working as expected.Driver
Linux
Note: Ensure kernel 5.8 or higher is being used. Execute the following command from
the terminal prompt to check the kernel version, uname -r.
1. Open a and type the command to Terminal Window sudo dmesg | grep Intel
check the Intel Driver Integration.
2. You should see the following response if the drivers are present, Intel(R) 2.5G
Ethernet Linux Driver.
Quick-Start Guide
FR
À DÉPOSER
EN MAGASIN À DÉPOSER
EN DÉCHÈTERIE
OU
FR
Cet appareil,
ses accessoires
et piles
se recyclent

Especificaciones del producto

Marca: StarTech.com
Categoría: Tarjeta/adaptador de red
Modelo: PR22GI-NETWORK-CARD

¿Necesitas ayuda?

Si necesitas ayuda con StarTech.com PR22GI-NETWORK-CARD haz una pregunta a continuación y otros usuarios te responderán




Tarjeta/adaptador de red StarTech.com Manuales

Tarjeta/adaptador de red Manuales

Últimos Tarjeta/adaptador de red Manuales