StarTech.com ST121WHDLR Manual de Usario
StarTech.com
extensor AV
ST121WHDLR
Lee a continuación 📖 el manual en español para StarTech.com ST121WHDLR (2 páginas) en la categoría extensor AV. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 11, 2019 11:05 AM
Product Diagram (ST121WHDLR)
Note: The above image represents both and . The ports are Transmitter Receiver
located in the same position on both the and .Transmitter Receiver
Port/Button/LED/Part Function
Transmitter
1Pairing/Channel
Button
• Used to pair devices to the Pairing: Wireless
Transmitter.
Note: Press and hold for 5 seconds.
• For better transmission, use the Channel: Channel
Button to use another channel.
2Network LED • Solid red indicates that the network is connected.
3Video LED • Solid blue indicates that the is Display Device
connected.
4IR OUT Port • Connect an to transmit an IR signal.IR Blaster
HDMI over Wireless Extender |1080p | 200 m
4
5USB Port
• Used for rmware updates.
Note: For future rmware updates refer to the
rmware section on the Product Support tab www.
startech.com/ST121WHDLR.
6DC 5V Port • Powers the .Wireless Extender
7 HDMI IN Port • Connects the to the Video Source Device
Wireless Extender.
8IR Blaster • Used to transmit an infrared signal.
Receiver
1Pairing/Channel
Button
• Used to pair devices to the Wireless Pairing:
Receiver.
Note: Press and hold for 5 seconds.
• For better transmission, use the Channel: Channel
Button to use another channel.
2Network LED • Solid red indicates that the network is connected.
3Video LED • Solid blue indicates that the is Display Device
connected.
4IR IN Port • Connect an to receive an IR signal.IR Receiver
5USB Port
• Used for rmware updates
Note: For future rmware updates refer to the
rmware section on the Product Support tab www.
startech.com/ST121WHDLR.
6DC 5V Port • Powers the .Wireless Extender
7HDMI OUT Port • Connects the to the Display Device Wireless
Extender.
8IR Receiver • Used to receive an infrared signal.
Requirements
For the latest requirements, please visit .www.startech.com/ST121WHDLR
57
6
1
2 3
8
1
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
FCC ID: Y3H706120181227
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC ID: 11232A-7061
IC Radiation Exposure Statement
This equipment complies with IC RSS-247 radiation exposure limit set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 0.5cm
between the radiator and your body.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
Safety Measures
• If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
• Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Notes: The maximum distance between the transmitter and the receiver is 600 ft. If
the wireless signal is obstructed by walls, or other interference the signal quality and
maximum distance will likely be reduced.
When extending infrared, this product can only support an IR signal in the 38kHz
carrier frequency.
Mounting the Transmitter/Receiver
The can be mounted using the included.Transmitter/Receiver Mounting Hardware
1. Align the with the on the back of the Mounting Hardware Mounting Hole
Transmitter/Receiver.
2. Screw the into the , being careful not to Mounting Hardware Mounting Hole
overtighten.
3. Loosen the on the .Adjustment Knob Mounting Hardware
4. Adjust the position the is facing.Transmitter/Receiver
5. Tighten the on the when the Adjustment Knob Mouting Hardware Transmitter/
Receiver is in the desired position.
LED Indicators
LED Display Function
HDMI
Transmitter
and
HDMI
Receiver
Network Solid Power is connected to the
Transmitter.
Slowly ashing red Connecting to a .Device
Video Solid Video transmission active.
Slowing ashing blue No video signal input.
Network &
Video
Flashes Indicates the Receiver is pairing.
Alternate ashing
(ash, pause, ash)
Channel switching in active.
Connecting the Extender
1. Position the near the (e.g. Computer, Wireless Transmitter Video Source Device
Blu-ray Player).
2. Connect an (sold separately) to the on the HDMI Cable HDMI IN Port Wireless
Transmitter Video Output Port Video Source Device and to the on the .
3. (Optional) Connect the to the on the , IR Blaster IR Out Port Wireless Transmitter
and position the directly in front of the IR sensor on your IR Blaster Video Source
Device.
Note: Check the manual of your for the IR sensor location.Video Source Device
4. Connect the to the on the Universal Power Adapter DC 5V Port Wireless
Transmitter AC Electrical Outlet and to an .
5. Position the near your (e.g. Television, Projector).Wireless Receiver Display Device
6. Connect an to the on the and to HDMI Cable HDMI Output Port Wireless Receiver
an HDMI port on the .Display Device
7. (Optional) Connect the to the on the , and IR Receiver IR In Port Wireless Receiver
position the in the area you would like to point your IR controller.IR Receiver
8. Connect the to the on the Universal Power Adapter DC 5V Port Wireless Receiver
and to an .AC Electrical Outlet
Especificaciones del producto
| Marca: | StarTech.com |
| Categoría: | extensor AV |
| Modelo: | ST121WHDLR |
¿Necesitas ayuda?
Si necesitas ayuda con StarTech.com ST121WHDLR haz una pregunta a continuación y otros usuarios te responderán
extensor AV StarTech.com Manuales
21 Septiembre 2024
21 Septiembre 2024
21 Septiembre 2024
21 Septiembre 2024
21 Septiembre 2024
21 Septiembre 2024
21 Septiembre 2024
21 Septiembre 2024
21 Septiembre 2024
21 Septiembre 2024
extensor AV Manuales
- extensor AV Philips
- extensor AV Abus
- extensor AV Ag Neovo
- extensor AV Allnet
- extensor AV Nedis
- extensor AV Eminent
- extensor AV Manhattan
- extensor AV Black Box
- extensor AV Tripp Lite
- extensor AV Vision
- extensor AV DataVideo
- extensor AV Techly
- extensor AV Bogen
- extensor AV Matrox
- extensor AV Steren
- extensor AV Digitus
- extensor AV LevelOne
- extensor AV Planet
- extensor AV Konig
- extensor AV D-Link
- extensor AV One For All
- extensor AV Marmitek
- extensor AV Genexis
- extensor AV ATen
- extensor AV Kindermann
- extensor AV Gefen
- extensor AV Peerless
- extensor AV Adder
- extensor AV Monoprice
- extensor AV Crestron
- extensor AV Logilink
- extensor AV Smart-AVI
- extensor AV SIIG
- extensor AV Polycom
- extensor AV IOGEAR
- extensor AV Micro Connect
- extensor AV Extron
- extensor AV KanexPro
- extensor AV Intelix
- extensor AV ASSMANN Electronic
- extensor AV Blustream
- extensor AV Avocent
- extensor AV Intellinet
- extensor AV Ebode
- extensor AV Speaka
- extensor AV Ecler
- extensor AV Rose Electronics
- extensor AV Epcom
- extensor AV Kramer
- extensor AV CYP
- extensor AV TV One
- extensor AV SmartAVI
- extensor AV IMG Stage Line
- extensor AV Oehlbach
- extensor AV Lindy
- extensor AV Atlona
- extensor AV HELGI
- extensor AV Liberty
- extensor AV Enson
- extensor AV Lightware
- extensor AV Vivolink
- extensor AV Approx
- extensor AV SWIT
- extensor AV Hall Research
- extensor AV AMX
- extensor AV WyreStorm
- extensor AV Rocstor
- extensor AV MuxLab
- extensor AV Seco-Larm
- extensor AV ConnectPro
- extensor AV Kanex
- extensor AV TechLogix Networx
- extensor AV C2G
- extensor AV SEADA
- extensor AV Comprehensive
- extensor AV PureLink
Últimos extensor AV Manuales
27 Octubre 2024
27 Octubre 2024
22 Octubre 2024
22 Octubre 2024
20 Octubre 2024
19 Octubre 2024
19 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024