StarTech.com SV231DPUCA Manual de Usario

StarTech.com Cambiar SV231DPUCA

Lee a continuación 📖 el manual en español para StarTech.com SV231DPUCA (2 páginas) en la categoría Cambiar. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: August 26, 2022 3:35 PM
Product Diagram (SV231DPUCA)
Front
Rear
Component Function
1Console USB HID Port
Connect a (e.g. Human Interface Device (HID)
Keyboard, Mouse, Trackpad, Number Keypad, or
Drawing Tablet)
Front (x1) and Rear (x3)
2Console USB Hub Port
Connect a SuperSpeed USB 5Gbps (USB 3.2
Gen 1) Peripheral Device
Front (x1) and Rear (x1)
2-Port USB-C DisplayPort Alt Mode KVM Switch
3Port Selection LED
Indicators
Solid Green : PC1 PC2or (Port not selected and
PC Connected)
Solid Red : PC1 PC2 or (Port Selected and PC not
Connected)
Half Green/Half Red: PC1 PC2 or (Port Selected
and PC Connected)
4Port Selection Button Press the to switch Port Selection Button
between or PC 1 PC 2
5Power Input Port Connect the supplied Universal Power Adapter
to power the KVM Switch
6Console DisplayPort
Output Port Connect to a on a DisplayPort Input Display
7Video Mode Switch
Console DisplayPort Output Port Console and
USB Hub Port data transfer rate options:
4K 60Hz (4:4:4) USB 480Mbps with
-- or --
4K 30Hz (4:4:4) / 4K 60Hz (4:2:0) USB with
5Gbps
8Console Audio Ports
Green Audio Device : Connect an (e.g. Speakers
or Headphones)
Pink Microphone: Connect a
9PC 2 USB-C Host Port
Connect to a with aComputer USB-C Port
For full functionality Host Computer USB-C
Port DP-Alt Mode must support
10 PC 1 USB-C Host Port
Connect to a with a Computer USB-C Port
For full functionality Host Computer USB-C
Port DP-Alt Mode must support
Product Information
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/SV231DPUCA
Package Contents
KVM Switch x 1
Set of Rubber Feet x 1
Universal Power Adapter x 1
Quick-Start Guide x 1
1 2 4
9 10 2
3
5 6 7
1 8
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
Safety Measures
If product has an exposed circuit board, do not touch the product under power.
Mesures de sécurité
Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
安全対策
製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
Misure di sicurezza
Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
Säkerhetsåtgärder
Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
4. Connect an to the located on the rear of the .Audio Device Console Audio Port, KVM Switch
5. (Optional) Connect up to two SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Peripheral Devices
to the located on the front and rear of the .Console USB Hub Ports, KVM Switch
Note: USB Devices Console USB Hub Ports USB The connected to will only work at
480Mbps KVM Switch 4K@60+USB 2.0 if the is set to
Connect the PCs
1. Connect the (sold separately) from the on the to the USB-C Cable USB-C Port Computer PC
1 USB-C Host Port KVM Switch on the rear of the .
Note: USB-C Cable The needs to support Data, Power Delivery and DisplayPort Alt-mode
for full functionality
2. Repeat step 1 for .PC 2
Operation
Power-On Sequence
1. Connect the from a to the on the Universal Power Adapter Wall Outlet Power Input Port
KVM Switch.
2. Power on all . Peripherals
3. Select by pressing and releasing the until the PC1 Port Selection Button Port Selection LED
Indicator Solid Red Computer
is Power on the corresponding for . PC 1 .
Note: PC 1 Ensure has fully booted to the operating system before proceeding.
4. Repeat step 3 to connect PC 2.
Troubleshooting
No Video is Displayed
If the is not passing-through video to the connected , and the KVM Switch Display Video Mode
Switch 4K@30+USB 3.0is set to , complete the following steps:
1. Disconnect the from the Universal Power Adapter KVM Switch.
2. Disconnect the from the and the . USB-C Host Cables Host Computers KVM Switch
3. Move the to positionVideo Mode Switch 4K@60+USB 2.0 .
4. Reconnect the to the .Universal Power Adapter KVM Switch
5. Reconnect the to the and the USB-C Host Cables Host Computers KVM Switch.
Note: Video Mode Switch If the previous steps resolve the issue, do not revert the back to
4K@30+USB 3.0
Requirements
Source PCs
Computers x 2
USB-C DisplayPort Alt-mode enabled
SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) USB-C Cables x 2
Console
DisplayPort Display x 1
DisplayPort Cable x 1
USB Mouse x 1
USB Keyboard x 1
(Optional) Audio Device (e.g. Headphones) x 1
(Optional) Microphone Device x 1
(Optional) USB HID Devices x 2
(Optional) SuperSpeed USB 5Gbps (USB 3.2 Gen 1) Peripheral Devices x 2
Installation
Select Resolution and USB Speed
Warning! Always disconnect the before adjusting the Universal Power Adapter Video Mode
Switch. Video Mode Switch 4K@60+USB 2.0.The default mode of the is
1. Move the to the appropriate and functionality for Video Mode Switch Resolution USB Speed
your setup, see for details.Component 7
2. Connect the to the on the Universal Power Adapter Power Input Port KVM Switch.
Connect the Console
Note: Computers, Displays, PeripheralsPower o all and before completing the following
installation steps.
1. Connect a to the , located on the rear DisplayPort Display Console DisplayPort Output Port
of the using a (sold separately). KVM Switch, DisplayPort Cable
2. Connect a and a to the , located on the USB Mouse USB Keyboard Console USB HID Ports
front and rear of the .KVM Switch
3. (Optional) After connecting the , there are two remainingUSB Mouse/Keyboard Console
USB HID Ports KVM Switch, located on the front and/or rear of the , for connecting up to two
additional .USB HIDs

Especificaciones del producto

Marca: StarTech.com
Categoría: Cambiar
Modelo: SV231DPUCA

¿Necesitas ayuda?

Si necesitas ayuda con StarTech.com SV231DPUCA haz una pregunta a continuación y otros usuarios te responderán




Cambiar StarTech.com Manuales

Cambiar Manuales

Últimos Cambiar Manuales