Sun Joe CJ601E-RM Manual de Usario

Sun Joe partidor de madera CJ601E-RM

Lee a continuación 📖 el manual en español para Sun Joe CJ601E-RM (17 páginas) en la categoría partidor de madera. Esta guía fue útil para 16 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/17

THANKS FOR YOUR PURCHASE

OF A REMANUFACTURED PRODUCT.

snowjoe.com

To make sure you get the most out of

your

product, be sure to register online at

to enjoy full product support.

PASTE UPC LABEL HERE

A Division of Snow Joe

®, LLC Model CJ601E-RM Form No. SJ-CJ601E-RM-880E-V1

OPERATOR’S MANUAL

ELECTRIC WOOD CHIPPER + SHREDDER

14-AMP | 16:1 REDUCTION RATIO

A Division of Snow Joe

®, LLC Model CJ601E-RM Form No. SJ-CJ601E-RM-880E-V1

OPERATOR’S MANUAL

ELECTRIC WOOD CHIPPER + SHREDDER

14-AMP | 16:1 REDUCTION RATIO

®, LLC

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

You and any other operator of this wood chipper + shredder

must read, understand, and follow these instructions in

their entirety. Failure to follow these instructions may result

in , and/or serious ELECTRIC SHOCK, FIRE PERSONAL

INJURY.

Notice the personal safety alert symbol m used in this

manual to draw your attention to a given along WARNING

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

mWARNING! Wear appropriate personal hearing

protection during use. Under some conditions and duration of

use, noise from this product may contribute to hearing loss.

mWARNING! The rotating blades can cut you. Keep

hands and feet away from the hopper and the discharge chute.

Before using the wood chipper + shredder, familiarize yourself

with the controls, especially how to stop the unit in an

emergency. The only individuals who should use the wood

chipper + shredder are those who thoroughly understand

these instructions and know how to properly operate the unit.

Children should never be allowed access to the wood chipper

+ shredder.

Retain this manual for future reference and reread it at the start

of each chipping season.

General Safety

1. Avoid dangerous environments – Do not use the wood

chipper + shredder in rain or in damp or wet locations. Do

not operate the unit in gaseous or explosive atmospheres

or use the unit near ammable or combustible liquids.

Motors in these tools normally spark, and the sparks

might ignite fumes.

2. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts. Wear

a protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

3. Use safety glasses – Also use dust mask, safety

footwear, snug-tting clothing, protective gloves, hearing,

and head protection.

4. Extension cords – To prevent electric shock, use only

with an extension cord suitable for outdoor use.

5. Disconnect the tool – Disconnect the wood chipper +

shredder from the power supply when it is not in use,

before servicing it, when changing accessories, and when

performing any other maintenance task.

6. Do not abuse the cord – Never carry the wood chipper

+ shredder by the cord or yank the cord to disconnect it

from the receptacle. Keep the cord away from heat, oil,

and sharp edges.

7. Stay alert – Watch what you are doing. Use common

sense. Do not operate the wood chipper + shredder when

you are tired or under the inuence of drugs, alcohol, or

other medication.

8. Store idle tool indoors – When not in use, the wood

chipper + shredder should be stored indoors in a dry and

high or locked-up place out of the reach of children.

9. Maintain the wood chipper + shredder with care –

Keep the cutting edges sharp and clean for optimal

performance and to reduce the risk of injury. Inspect the

extension cord periodically and immediately replace it

if damaged. Keep the handles dry, clean, and free from

oil and grease. Follow the additional recommendations

described in the Care + Maintenance section of this

manual.

10. Check for damaged parts – Before further use of the

appliance, a part that is damaged should be carefully

checked to determine that it will operate properly and

perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other condition that may aect its

operation. A part that is damaged should be properly

repaired or replaced. Contact the Snow Joe® + Sun Joe®

customer service center at 1-866-SNOWJOE

(1-866-766-9563) for assistance.

11. Lighting – Only operate your wood chipper + shredder in

daylight or good articial light.

12. Do not overreach – Keep proper footing and balance at

all times.

13. Never leave a running tool unattended – Turn the

wood chipper + shredder o and wait until it comes to a

complete stop before leaving the work area.

14. Avoid accidental starting – Do not carry the wood

chipper + shredder with your nger on the switch. Make

sure the switch is o before plugging in or unplugging the

unit.

15. Use the right tool – Do not use this machine for any job

except that for which it was intended.

16. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

Personal Safety

1. Before starting the wood chipper + shredder, make sure

that the hopper inlet is empty.

2. Keep your face and body away from the opening.

3. Do not allow hands or any other part of the body or

clothing near the hopper or discharge chute.

4. Never put your hands into the hopper while the wood

chipper + shredder is running. Always use the paddle

supplied with your wood chipper + shredder to push items

into the hopper.

5. Do not try to force objects larger than the recommended

diameter of 1-1/2" into the hopper.

6. Always stand clear of the discharge zone when operating

the wood chipper + shredder. Never reach under the unit

until it has come to a complete stop.

7. When feeding material into the wood chipper + shredder,

be careful to remove pieces of metal, rocks, bottles, cans

or other foreign objects that may damage the blades.

8. If the cutting mechanism strikes a foreign object or if the

wood chipper + shredder should start making any unusual

noise or vibration, turn it o and allow it to come to a

complete stop. Disconnect from power supply and take

the following steps:

– Inspect for damage;

– Check for and tighten any loose parts.

mWARNING! Never reach into the hopper until the

wood chipper + shredder has come to a complete stop and

is unplugged. The blades will continue to rotate for a few

seconds after the unit is turned o.

9. Do not allow processed material to build up in the

discharge zone; this may prevent proper discharge and

can result in kickback of material through the hopper.

mWARNING! Never put your hands near the

discharge chute. Failure to heed the warning could result in

serious injury.

10. If the wood chipper + shredder becomes clogged, turn it

OFF and disconnect from power supply before clearing

debris. Keep the power source clear of debris and other

accumulations to prevent damage to the power source.

Remember that the starting mechanism on engine

powered tools will cause the cutting mechanism to move.

11. Keep all guards and deectors in place and in good

working condition.

12. Do not operate the wood chipper + shredder on a paved

or gravel surface where ejected material could cause

injury.

13. Turn o the wood chipper + shredder and disconnect it

from the power supply whenever you leave the work area.

14. Do not tilt the wood chipper + shredder while it is running.

15. Never reach into the hopper until the wood chipper +

shredder has come to a complete stop and has been

disconnected from the power supply.

Electric Safety

1. Ground fault circuit interrupter (GFCI) protection should

be provided on the circuit(s) or outlet(s) to be used for

this electric wood chipper + shredder. Receptacles are

available having built-in GFCI protection and may be used

for this measure of safety.

2. To prevent electric shock, use only with an extension cord

suitable for outdoor use, such as SW-A, SOW-A, STW-A,

STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.

Before use, check that the extension cord is in good

condition. When using an extension cord, make sure to

use one heavy enough to carry the current to the product.

For lengths up to 50 ft (15 m), a No. 14 AWG (or greater)

extension cord must be used. For lengths more than

50 ft (15 m) and up to 100 ft (30 m), a No. 12 AWG

(or greater) extension cord must be used. An undersized

cord will cause a drop in line voltage resulting in loss of

power and overheating.

Especificaciones del producto

Marca:	Sun Joe
Categoría:	partidor de madera
Modelo:	CJ601E-RM
Color del producto:	Zwart
Peso.:	1400 g
Ancho:	15.8 mm
Profundidad:	13.5 mm
Altura:	18 mm
Peso del embalaje:	3200 g
Ancho del embalaje:	25.5 mm
Empaquetadura en profundidad:	41 mm
Altura del embalaje:	42.5 mm
Amable:	Home audio-microsysteem
Fuente-de-alimentación:	AC/Batterij
Bluetooth:	Ja
Formato de audio soportado:	MP3
Puerto USB:	Ja
Guía de inicio rápido:	Ja
Número de puertos USB 2.0:	2
Micrófono, entrada de línea:	Ja
Energía promedio:	10 W
Número soportado de baterías/baterías:	2
Número de hablantes:	2
Salida de audio:	1
Voltaje de entrada:	220-240 V
Configuración del ecualizador:	Ja
Frecuencia:	50 - 60 Hz
Salida de línea:	Ja
Número de bandas del ecualizador.:	5
Conexión a la computadora:	Ja
Reproducir MP3:	Ja
karaoke:	Nee
Tipo-de-unidad-óptica:	CD, CD-R, CD-RW
Bandas de frecuencia soportadas:	FM, PLL
Número de canales preestablecidos:	30
Reproductor de discos ópticos:	Ja
Número de unidades ópticas:	1 schijven
Platina de casete:	Nee
Compatibilidad con acoplamiento de Apple:	Niet ondersteund
Sintonización digital automática:	Ja
Mando a distancia incluido:	Ja
Wifi.:	Nee
Tipo-de-visualización:	LED
Anexo de título:	20