Sunbird Solar Solarpod Pro 1000 Manual de Usario
Sunbird Solar
Generador
Solarpod Pro 1000
Lee a continuación 📖 el manual en español para Sunbird Solar Solarpod Pro 1000 (4 páginas) en la categoría Generador. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
Solarpod™ Pro 1000 User Manual RevUK130924 (For Model: 04-SP1000-09)
PORTABLE SOLAR GENERATOR
USER MANUAL
PORTABLE SOLAR GENERATOR
USER MANUAL
Solarpod
TM
Pro 1000 by Sunbird Solar
Sunbird Solar Solarpod™ Pro 1000 is a remarkably light 16.5kg/36.3lb
. portable power center with a
full, 960 watt-
hours of rechargeable power to bring portable energy to your home, office, or job
site. Whether as a backup power supply for areas experiencing power outages due to natural
disaster or as a mobile generator for a campsite, the Solarpod™ Pro 1000
powers your world.
Charge it from available electricity or operate self-
sufficiently using one of the Sunbird Solar
Solar Panels. No set-up is required, just plug in and go. Includes an AC charger
and a cable to
connect directly to a solar panel. The internal LiFePO
4
battery and energy management system is
the one most advanced on the market with a long life cycle and reliable performance.
Section 1
_________________________
_______________________________________________
IMPORTANT WARNINGS AND SAFEGUARDS
Read all instructions thoroughly before operating this unit to avoid injury to self or property and
avoid damage to the unit. Keep instructions handy for reference during use.
ENERGIZED EQUIPMENT –
ELECTRICAL SHOCK AND EXPLOSION HAZARDS
•
Do Not submerge in liquid or operate in wet environments.
waterproof or water resistant. Operate in dry environments only.
• Do Not operate in flammable or explosive environments
•
Do Not operate if the unit is damaged in any way including loose electronics
or if charging cords are frayed and wires are exposed.
• Do Not place foreign objects inside of the power outlets.
• Do Not disassemble. There are no user serviceable part
s. Contact
manufacturer for all repairs.
_________________________________________________________________________
• Consult your physician before using with CPAP
devices or other non
support medical equipment.
• Administer
close supervision when operating around children or persons
with disabilities.
• Do Not use any devices over 1000W
for risk of damage to the inverter.
• Do Not block the air inlets.
• Not recommended for use or storage below 14ºF (-
10ºC) or above 120ºF
(49ºC).
If using above 120ºF, place out of direct sunlight to prevent
overheating.
Section 2
________________________________________________________________________
WARRANTY
• Solarpod™ Pro 1000 is only serviceable by an authorized
repair facility. Do not dismantle.
Warranty is void if the device is opened by unauthorized personnel. For technical support,
contact your local distributor or go to www.sunbird-
solar.com/technical_support.
• Registration for the limited warranty described on Sunbird Solar Ltd.
website can be
completed by going online to www.sunbird-
solar.com/warranty_registration
and exclusive warranty provided by Sunbird Solar Ltd. In no ev
ent will Sunbird Solar Ltd. be
liable for any indirect or incidental damages or losses of any kind arising from or as a result of
misuse or abuse, or the incorrect installation or operation of the product.
DANGER
CAUTION
CAUTION
. portable power center with a
hours of rechargeable power to bring portable energy to your home, office, or job
site. Whether as a backup power supply for areas experiencing power outages due to natural
powers your world.
sufficiently using one of the Sunbird Solar
Ltd.
and a cable to
battery and energy management system is
the one most advanced on the market with a long life cycle and reliable performance.
_______________________________________________
Read all instructions thoroughly before operating this unit to avoid injury to self or property and
ELECTRICAL SHOCK AND EXPLOSION HAZARDS
Do Not submerge in liquid or operate in wet environments.
Device is not
waterproof or water resistant. Operate in dry environments only.
Do Not operate if the unit is damaged in any way including loose electronics
s. Contact
_________________________________________________________________________
devices or other non
-life
close supervision when operating around children or persons
for risk of damage to the inverter.
10ºC) or above 120ºF
If using above 120ºF, place out of direct sunlight to prevent
________________________________________________________________________
repair facility. Do not dismantle.
Warranty is void if the device is opened by unauthorized personnel. For technical support,
solar.com/technical_support.
website can be
solar.com/warranty_registration
. This is the sole
ent will Sunbird Solar Ltd. be
liable for any indirect or incidental damages or losses of any kind arising from or as a result of
Section 3
______________________________________
PARTS IDENTIFICATION
Top: Display & Controls
Battery Capacity
(Blue LEDS)
Charge Rate
(
Yellow
AC Power Button
(Red LED)
Front: Output Side
Double USB
Port
AC
Output
AC Fuse
DC Charge
Input
Back
:
Input
Side
______________________________________
__________________________________
Top: Display & Controls
Charge Rate
Yellow
LEDS)
Power Button
(Green LED)
Front: Output Side
Double USB
DC 12V
Output
DC Fuse
Side
Section 4
_______
_________________________________________________________________
CHARGING
Fully charge before first use. For maximum efficiency,
charge after each use or every 2
is being stored. Failure to properly charge as listed below could damage the
unit and affect
performance. CAUTION: ONLY USE CHARGERS PROVIDED WITH THE SOLARPOD
TM
DAMAGE MAY OCCUR.
Charging Indicator - Indicates Charging Rate
1.
Five yellow
LEDs represent the charging rate when using any of the methods of charging
below.
2.
Each yellow
LED equals approximately 20% charge rate. This will help you to position a solar
panel in the best angle to the sun. If the Solarpod™ Pro 1000
is plugged into a 1
or 12V - 24VDC power source, all 5 LEDs should be illuminated.
Battery Indicator - Indicates Battery Capacity Level
1.
Five blue LEDs represents the current battery capacity.
2.
Each blue LED represents approximately 20% full.
Solar Charging (recommended Sunbird Solar 120W Solar Panel)
1.
The Solarpod™ Pro 1000 has built-
in battery protection and does not require a solar charge
controller.
2.
Place the solar panel in direct sun.
3.
Connect the solar charging cable (included) male pin tip to the DC IN port
on the
Pro 1000. Connect the MC4 (+) and (-) tips to the solar panel.
4.
Adjust the solar panel so that it is directly facing the sun.
Charging will begin immediately
the yellow charging LED indicators will illuminate.
5.
To ensure full battery charge, continue charging for 1 additional hour.
6.
To maximize battery cycle life, disconnect when Solarpod™ Pro 1000
is fully charged.
AC Wall Charging (Adapter Included)
1.
Connect the male pin tip of the AC Wall Charger into the DC IN port of the
Solarpod
and then plug the other end into an electrical outlet.
2.
The charging indicator on the AC Wall Charger
will illuminate red when charging is in process
and green when the Solarpod™ Pro 1000 has reached a full charge.
3.
The yellow charging LED indicators will also illuminate.
4.
To ensure full battery charge, continue charging for 1 additional hour after
1000 is fully charged.
5.
There is no need to disconnect AC Wall Charger when charging is complete.
Connecting Charging Lines to the Solarpod™ Pro 1000
1.
Align head tabs with DC IN socket on back of unit.
2.
Turn head clockwise until the silver lock tab is a
t top and press lock tab toward unit.
3.
To unplug charging head, follow the above steps in reverse order.
1. Align Tabs
.
2. Turn Clockwise
3. Press in Lock
_________________________________________________________________
charge after each use or every 2
months if it
unit and affect
TM
PRO 1000 OR
LEDs represent the charging rate when using any of the methods of charging
LED equals approximately 20% charge rate. This will help you to position a solar
is plugged into a 1
00V – 240VAC
in battery protection and does not require a solar charge
on the
Solarpod™
Charging will begin immediately
and
is fully charged.
Solarpod
™ Pro 1000
will illuminate red when charging is in process
To ensure full battery charge, continue charging for 1 additional hour after
Solarpod™ Pro
There is no need to disconnect AC Wall Charger when charging is complete.
t top and press lock tab toward unit.
Section 5
________________________________________________________________________
OPERATING INSTRUCTIONS
Once charged, the Solarpod™ Pro 1000
is ready to use right out of the box. No set up is required.
All outputs may be used simultaneously. Check your device’s specifications to make sure they are
compatible with the Solarpod™ Pro 1000.
ON/OFF Button - When on, the switches
surrounding LED
AC Power Button - When on, the switches
surrounding LED
USB Operation
• Turn the ON/OFF BUTTON on.
•
Plug in your device’s USB power or charging
•
A combined 5V/2A maximum output is available between the two ports (when fully
charged).
•
Disconnect and power off when not in use
AC Operation (max 1000W output)
• Press the AC power button
to activate the inverter
•
Plug in your device’s power or charging cable into the electrical
• Disconnect and turn off the
power when not in use
• CAUTION
: CHECK CAREFULLY THAT THE VOLTAGE RATING OF YOUR APPLIANCE MATCHES
THE VOLTAGE RATING OF THE
Solarpod™ Pro
• CAUTION
: Using devices rated higher than
minutes may cause the Solarpod™ Pro
1000
cooled the circuit will reset and the
Solarpod™ Pro
Advantages of a Pure Sine Wave Inverter
•
A pure sine wave inverter produces a nearly perfect sine wave output (less than 3%
total harmonic distortion) that is essentially
• Eliminates electrical
interference, overheating and noise.
•
Computer crashes and other appliance operational glitches can be avoided.
• Inductive loads such as variable-
speed motors and microwave ovens can be used,
and supports in running them quieter and cooler.
• Some appliances
and sensitive electronics will simply not work properly without
pure sine wave power.
•
Reduces audible and electrical noise in fans, fluorescent lights, magnetic circuit
breakers and electronic gears.
12V DC Operation (Max 15A output)
• Turn the ON/OFF BUTTON on.
•
Plug in your 12V device’s power or charging cable into the 12V Vehicle Socket
• Neither power button need to be on.
•
Disconnect and power off when not in use
________________________________________________________________________
is ready to use right out of the box. No set up is required.
All outputs may be used simultaneously. Check your device’s specifications to make sure they are
surrounding LED
light will turn green.
surrounding LED
light will turn red.
Plug in your device’s USB power or charging
cable.
A combined 5V/2A maximum output is available between the two ports (when fully
Disconnect and power off when not in use
.
to activate the inverter
.
Plug in your device’s power or charging cable into the electrical
AC socket.
power when not in use
.
: CHECK CAREFULLY THAT THE VOLTAGE RATING OF YOUR APPLIANCE MATCHES
Solarpod™ Pro
1000 UNIT YOU HAVE PURCHASED.
: Using devices rated higher than
900-1000W and operated for more than 10
1000
to overheat and shut down. Once it has
Solarpod™ Pro
1000 will be operational again.
A pure sine wave inverter produces a nearly perfect sine wave output (less than 3%
total harmonic distortion) that is essentially
identical to utility-supplied grid power.
interference, overheating and noise.
Computer crashes and other appliance operational glitches can be avoided.
speed motors and microwave ovens can be used,
and supports in running them quieter and cooler.
and sensitive electronics will simply not work properly without
Reduces audible and electrical noise in fans, fluorescent lights, magnetic circuit
Plug in your 12V device’s power or charging cable into the 12V Vehicle Socket
.
Disconnect and power off when not in use
.
Especificaciones del producto
| Marca: | Sunbird Solar |
| Categoría: | Generador |
| Modelo: | Solarpod Pro 1000 |
¿Necesitas ayuda?
Si necesitas ayuda con Sunbird Solar Solarpod Pro 1000 haz una pregunta a continuación y otros usuarios te responderán
Generador Sunbird Solar Manuales
4 Septiembre 2024
Generador Manuales
- Generador Bosch
- Generador Philips
- Generador DeWalt
- Generador Honeywell
- Generador Vetus
- Generador Eurom
- Generador Generac
- Generador Subaru
- Generador Ozito
- Generador Gude
- Generador Black And Decker
- Generador Stanley
- Generador Hyundai
- Generador Westinghouse
- Generador Moulinex
- Generador Taurus
- Generador Parkside
- Generador Sun Joe
- Generador Einhell
- Generador Voltcraft
- Generador Craftsman
- Generador Powerplus
- Generador Trotec
- Generador Scheppach
- Generador Honda
- Generador Powerfix
- Generador Bavaria
- Generador Simpson
- Generador Gys
- Generador Zipper
- Generador Harvia
- Generador Defort
- Generador Superior
- Generador Fuxtec
- Generador Truper
- Generador Cocraft
- Generador Cecotec
- Generador Herkules
- Generador Toolcraft
- Generador Lumag
- Generador Telair
- Generador Endress
- Generador GW Instek
- Generador EcoFlow
- Generador Powerspot
- Generador Black Decker
- Generador Bluetti
- Generador Anova
- Generador Global
- Generador King Craft
- Generador Zgonc
- Generador Duromax
- Generador CrossTools
- Generador Jackery
- Generador Lifan
- Generador Rigol
- Generador Cleveland
- Generador Joy-it
- Generador Aim TTi
- Generador Full Boar
- Generador Duro Pro
- Generador Alpha Tools
- Generador Könner & Söhnen
- Generador Load Up
- Generador Solaaron
- Generador PowerTech
- Generador Woods
- Generador A-iPower
- Generador Stromkraft
- Generador ITC Power
- Generador MSW
- Generador Ribimex
- Generador Powerhouse
- Generador Arvey
- Generador Tektronix
- Generador PRAMAC
- Generador DuroStar
- Generador ThermaSol
Últimos Generador Manuales
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
27 Octubre 2024
25 Octubre 2024
17 Octubre 2024
12 Octubre 2024
10 Octubre 2024
3 Octubre 2024
2 Octubre 2024