Sunding SD-548C Manual de Usario

Sunding Computadoras para bicicletas SD-548C

Lee a continuación 📖 el manual en español para Sunding SD-548C (1 páginas) en la categoría Computadoras para bicicletas. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Sunding Bicycle Computer

SD-548C (14Functions)

FUNCTIONS

- SPD CURRENT SPEED

- ODO ODOMETER （0.00 99999km/m)1～

- DST TRIP DISTANCE

- MXS MAXIMUM SPEED

- AVS AVERAGE SPEED

- TM ELAPSED TIME .

- CLK CLOCK 12H/24H （）

- SCAN

- “+” “ ” COMPARATOR －

- SETTING SPEED SCALE km/h,m/h （）

- SETTING TYRE CIRCUMFERENCE : 0mm （～

9999mm ）

- SETTING THE LAST VALUE OF ODOMETER/ODO

- FREEZE FRAME MEMORY

- AUTO ON/OFF

Computer Battery Installation

Remove the battery cover from the bottom of the computer

by using a ﬂat blade screwdriver, install one CR2032

battery with the positive (+) pole facing the battery cover

and replace the cover. Should the LCD show irregular

ﬁgures, take out the battery and reinstall it.

Sensor Transmitter Battery Installation

Remove the battery cover

from the bottom of the

computer by using a ﬂat blade

screwdriver, install one 23A

12V battery with the positive

(+) pole facing the battery

cover and replace the cover.

Should the LCD show

irregular ﬁgures, take out the battery and re-install it.

Sensor Transmitter

Attach the sensor transmitter to the left fork blade, the

distance between computer and the sensor can not exceed

60cm, the closer the batter. Using the shims to adjust the

diameter, and using the cable

ties(show below) to tie it with the

fork. Position the sensor

transmitter and magnet as shows,

make sure that the arc of the

magnet intersects the alignment mark on the sensor

transmitter with 1.5mm clearance.

Mounting Shoe

Attach the mounting shoe with the cable ties to the

handlebar, adjust

the mounting shoe on the handlebar with

the shims to

hold its position

Computer

Attach the computer to the mounting shoe by sliding the

unit until it snaps ﬁrmly into its postion. To remove it, press

the button on it in the opposite direction.

To check for proper speed function and sensor alignment,

spin the front wheel with computer in speed mode. Adjust

the position of sensor and magnet when there is no or weak

reaction.

Wheel Size Input

‘2060’ appears on the screen when the battery has been

installed, with one ﬁgure ﬂashing,choose the correct wheel

circumference from the table below.Press RIGHT button to

advance digits as needed and LEFT button to conﬁrm and

advance. (The circumference ranges 0m 9999mm), press m～

LEFT button to enter KM/M mode.

Setting（

（（

（）km/h））

）（/（（

（）m/h））

）

Press the RIGHT button to choose km/h or

m/h. Press the LEFT button to enter

CLOCK mode.

CLK Mode(12H/24H)

In CLOCK Mode, press the LEFT button

for 3 seconds to enter 12/24H selection.

Re-press the LEFT button for 12/24

exchanging. Press the RIGHT button to

enter Hour setting mode, when the ﬁgure

indicating HOUR start to ﬂash, press the LEFT button to

adjust it.

Continue to press the RIGHT button to enter Minute setting

mode, when the ﬁgure indicating MINUTE start to ﬂash,

press the LEFT button to adjust it and RIGHT button to

conﬁrm, press the RIGHT button again to ODO mode.

Setting the Last value of

Odometer

In ODO mode, press the LEFT button

for 2 seconds to set the ODO value,

its initial value is 0000.0. when one

figure flashing, press RIGHT button to adjust it and

LEFT button to confirm it and start to set the next

figure.(after re-install the battery, latest value can

be inputted according to the value exists before the

battery is re-installed).

Reset of Mileage Parameter

In ODO mode, press and hold both RIGHT and LEFT

button simultaneously for 3 seconds to clear the tire

circuference and (km/m) setting, The user need to reset the

tire circumference and (km/m), the original ODO value and

CLOCK will remain unaffected.

Speedometer

Speed is shown all the time on the screen, its maximum

reading is 99.9km/h(m/h), and it’s accurate to +/- 0.1km/h

(m/h).

Speed Comparator

During riding , ‘ ’+ and -‘ ’ indicates the current speed is

higher or lower than average speed(AVS) .

Odometer

In ODO mode , the total distance is

indicated on the screen, its mileage

range is 0.00 99999km(m). the 1 ～

display will be back to 0 when value

exceeds its maximum limit, press the RIGHT button to enter

DST mode..

Trip Distance (DST)

In DST mode, the distance for one trip

is indicated on the bottom line. DST

ranges from 0.001 9999km(m), when ～

the value exceed the range limit, it

restarts from 0 automatically. Both the time and the

distance records will be cleared when the time of one trip

exceed the range limits.

press the LEFT button for 5 seconds to clear the records of

DST,MXS,AVS and TM.

Press the RIGHT button to enter MXS mode.

Maximum Speed (MXS)

In MXS mode, maximum speed is

indicated on the bottom line. Press the

LEFT button for 5 seconds to clear the

records of MXS,DST,AVS and TM.

Press the RIGHT button to enter AVS mode.

Average Speed

In AVS mode, average speed is

indicated on the bottom line. Press the

LEFT button for 5 seconds to clear the

records of AVS,DST,MXS and TM.

Press RIGHT button to enter TM mode.

Trip Time

In TM mode, trip time is indicated on

the bottom line.TM ranges 0 :00 :00～

99 :59 :59. It will be back to 0 when

value exceed the limits.

Press the LEFT button for 5 seconds to clear the records of

TM, DST,MXS and AVS.

Press the RIGHT button to enter SCAN mode.

SCAN

In Scan mode , DST, MXS, AVS and TM mode are

indicated in turn every 4 seconds.

Press the RIGHT button to enter CLOCK Mode.

Sleep Mode

If no signal has been inputted for 300 seconds, computer

will enter into Sleep Mode, and CLK value remains. It will

turn back to the former mode with all the data collected

when any signal is inputted or any button is pressed.

FREEZE FRAME MEMORY

Press the LEFT button in any time will enter into freeze

frame memory mode. Flashing TM data will appear on the

screen. Press the RIGHT button to view the records of DST,

MXS, AVS and TM.

Press the LEFT button to end it.

Buttons Instruction

Press the RIGHT button to choose any mode below :

ODO, DST, MXS, AVS, TM, SCAN DST MXS AVS（、、、

TM and CLOCK. It’s unnecessary to press the LEFT ）

button except choosing the Freeze frame Memory mode.

In Freeze Frame Momery mode, press the RIGHT button,

several data will display, re-press LEFT button to turn back

to other modes.

Malfunctions and Problems

Malfunctions Problems

No speedometer

Improper magnet/sensor alignment

Distance between computer and

sensor transmitter exceed 60cm

Low battery voltage of sensor

transmitter or computer.

Short distance of

the transmitter or

no receiving

Lower battery voltage, need to

change for a new one.

Display Abnormal

ﬁgures Too much Electromagnetic

interference around

Inaccurate value is

indicated Improper input, such as wheel

circumference.

Slow display

re spon se

Temperature exceeds operating

limits(0℃～ ℃55 ).

Black display

Temperature too high, or put in

direct sunlight for too long time.

Need take back to shadow place for

a period.

Weak display Poor battery contact or dead battery

Display shows

irregular ﬁgures

Take out battery and re-install it

after 10 seconds.

Sensor without

reaction

Put off the insulation ﬁlm of the

sensor transmitter

Accessories

TIRE SIZE

CIRC TIRE SIZE CIRC

700c x 38mm 2180 26’’ x 2.25’’ 2115

700c x 35mm 2168 26’’ x 2.1’’ 2095

700c x 32mm 2155 26’’ x 2.0’’ 2074

700c x 30mm 2145 26’’ x 1.9’’/1.95’’ 2055

700c x 28mm 2136 26’’ x 1.75’’ 2035

700c x 25mm 2124 26’’ x 1.5’’ 1985

700c x 23mm 2105 26’’ x 1.25’’ 1953

700c x 20mm 2074 26’’ x 1.0’’ 1913

700cTubulari 2130 24’’ x 1.9’’/1.95’’ 1916

650c x 23mm 1990 20’’ x 1-1/4’’ 1618

650c x 20mm 1945 16’’ x 2.0’’ 1253

27’’ x 1-1/4’’ 2161 16’’ x 1.95’’ 1257

27’’ x 1-1/8’’ 2155 16’’ x 1.5’’ 1206

26’’ x 2.3’’ 2135

Especificaciones del producto

Marca:	Sunding
Categoría:	Computadoras para bicicletas
Modelo:	SD-548C
Color del producto:	Wit
Amable:	IP-beveiligingscamera
Código de seguridad internacional (IP):	IP66
Bluetooth:	Nee
Stemcodecs:	G.711
factor vorm:	Rond
Enfoque automático:	Ja
Soporte de colocación:	Buiten
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Método de montaje:	Plafond/muur
Resolución Máxima:	2592 x 1944 Pixels
Número total de megapíxeles:	5 MP
Formatos de compresión de vídeo:	H.264, H.265
Diámetro:	80 mm
Tipo de fuente de energía:	DC, PoE
Salida de corriente (voltios):	12
Iluminación mínima:	0 Lux
Número de cámaras:	1
Disco duro incorporado:	Nee
Vision nocturna:	Ja
tipo LED:	IR
Detección de movimiento por vídeo:	Ja
Cifrado HTTPS:	Ja
Sistema de audio:	2-weg
Capacidad de zoom:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Rango focal:	2.8 - 12 mm
Protección de contraseña:	Ja
Consumo de energía (máx.):	8 W
Certificación:	CE, FCC, NEMA 4X
Tamaño del sensor óptico:	1/2.9 "
Estabilizador de imagen:	Ja
Tipo de sensor de imagen:	CMOS
Zoom óptico:	4.3 x
Resoluciones de gráficos compatibles:	320 x 240,640 x 480 (VGA),720 x 480,800 x 600 (SVGA),1280 x 720 (HD 720),1280 x 960,1920 x 1080 (HD 1080),2048 x 1536 (QXGA),2592 x 1944
navegador web:	Ja
Reducción de ruido:	Ja
Estándar de red:	IEEE 802.3af
Longitud:	258.3 mm
Funciones de seguridad:	Vandaalbestendig
Protocolos de red compatibles:	IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP
Gestión basada en web:	Ja
filtro de dirección IP:	Ja
Exploración progresiva:	Ja
Calidad de servicio (QoS):	Ja
yo codifico:	IK10
Frecuencia de muestreo:	8 kHz
Tipo de sterkteregeling:	Auto
Modo día/noche:	Ja
Número de lentes:	1
Número de apertura máxima:	2.8
Número mínimo de apertura:	1.4
Puertos de salida BNC:	1
Número de sensores:	1
Vídeo transmitido en vivo:	Ja
A prueba de la intemperie:	Ja
Alcance de visión nocturna:	30 m
Filtro de terminación de infrarrojos (IR):	Ja
Número de píxeles efectivos (H x V):	3096 x 2202 Pixels
control de velocidad de bits:	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)
Ajuste de calidad de imagen:	Brightness, Contrast, Sharpness
Consumo de energía (alimentación a través de Ethernet (PoE)):	10 W
Amplio rango dinámico (WDR):	Ja
tasa-de-bits:	128Kbps - 20Mbps
Wifi.:	Nee
Temperatura de funcionamiento (TT):	-30 - 50 °C
Humedad relativa de funcionamiento (VV):	20 - 80 procent
Máscara zona privada:	Ja
Análisis de comportamiento:	Line crossing detection, Unattended baggage detection
Funciones del sistema de videovigilancia inteligente (IVS):	Face detection, People counting
Ángulo de visión de la lente, horizontal:	71 °
Girar y reflejar:	Ja
Tipo de notificación de alerta:	E-mail
Tecnología de reducción de ruido:	3D-ruisonderdrukking
Superposición de textos:	Ja