Sunix UTS1009GC Manual de Usario

Sunix Cables para PC y periféricos UTS1009GC

Lee a continuación 📖 el manual en español para Sunix UTS1009GC (1 páginas) en la categoría Cables para PC y periféricos. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Microsoft Windows

In order to ensure proper operation of your USB to serial adapter, please follow the instructions below:

(1) Please go to SUNIX website for latest driver download.

(2) Click the Setup.exe from your driver.

(3) Follow the onscreen installation step.

(4)

After ﬁnishing installation, please connect the USB Serial Adapter to your PC.

(5) Please check to see if each is installed properly in Device Manager.

Start > Controller Panel > System > Device Manager

Apple macOS

Please download the driver for macOS, which includes driver and installation guide.

• Expands one independent RS-232 serial port through USB interface.

• Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.

• No IRQ, DMA, I/O address resource required.

• Supports USB2.0 and USB1.1 compatible.

• Serial port provides transmission rate up to 115.2Kbps.

• Built-in ± 15KV ESD protection for all serial signals.

• Compact Size and low power consumption.

• Supports USB bus power without additional external power.

• Certiﬁed by CE, FCC, RoHS, and Microsoft WHQL approval.

• Support Microsoft Windows and Linux.

Features

SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into

asynchronous RS-232 serial ports for communication with serial devices. The UTS

adapter is compatible with both USB 2.0 and 1.1 speciﬁcations and provides serial port

with transfer speed up to 115.2Kbps. It provides a quick, simple and cost-eﬀective way to

bring the advantages of data accessibility and mobile solution for kinds of commercial

and industrial automation applications.

Introduction

Please check if the following items are present and in good condition upon opening

package. Contact your vendor if any item is damaged or missing.

- USB to RS-232 Adapter, Cable 120 cm (4 ft)

Package Checklist

Pin Assignment

COM port pin assignments for USB to Serial Adapter

RS-232

DCD RxD TxD DTR GND DSR RTS CTS

1 2 3 4 5 6 7 8 9

DB9M:

1 5

(1) Right click your mouse on the COM port, and select � �.Properties

(2) Select �Port Setting� page to modify COM port setting.

(3) Select �Advanced� icon, you can modify COM port number and FIFO.

(4) When serial device requires setting to a speciﬁc COM number,

comﬁrm the port number match the

seetings required for your serial device.

After installing USB to Serial Adapter successfully, you can modify the setting for each port in Device Manager.

Q 1. The USB to Serial Adapter will NOT communicate with my serial device.

Ans: It may cause by following issue:

a. Please verify that the USB to Serial Adapter is installed correctly.

b. Conﬁrm that the port settings match the settings required for your serial device.

c. If the serial device requires software, make sure it’s installed properly.

d. Make sure the number of ports is matching the number of USB to Serial Adapter COM port.

e. USB to Serial Adapter does NOT suppor t serial mouse.

f. Please download the latest driver to support your new serial product.

Q 2. Why the COM port number will be diﬀerent?

Ans: The COM port number is assigned by which USB slot is used to connect to the computer.

If changing USB slot, the por t number will change. Please keep installing USB adapter in the same USB slot.

Speciﬁcation

USB Communication

Interface Universal Serial Bus (USB)

Receptacle USB Type-A with cable

Controller Proliﬁc PL2303GC

Performance

USB 1.1 full speed 12Mbps

USB 2.0/3.0/3.1 compatible.

Serial Communication

Interface RS-232

Power

Input USB Bus-power 5VDC

Regulatory Approvals

Software

Microsoft WHQL certiﬁcation

Driver Communication

Windows Client

Windows Server

Windows Embedded

Linux

Mac

7 / 8.x / 10 (X86/X64)

2008R2 / 2012/2016(X64)

Windows Embedded CE, Windows CE

Linux 2.6.x or later

MAC OS X

Operating Environment

Temperature

Humidity

0 to 60 °C ( 32 to 140 °F )

5% to 95% RH

Storage Environment

Temperature -20 to 85 °C ( -4 to 185 °F )

Baud rate 75bps ~ 115.2Kbps

Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND

FIFO 16 byte Hardware

Data bit 5, 6, 7, 8

Stop bit 1, 1.5, 2

Parity even, odd, none, mark, space

Flow Control

None, Xon/Xoﬀ, RTS/CTS

Receptacle D-Sub 9-pin Male

No. of Port

1, 2, or 4-por t (Product Dependent)

1-port: USB to 1-port RS-232 Model

2-port: USB to 2-port RS-232 Model

4-port: USB to 4-por t RS-232 Model

Protection

±15KV

ESD protection for each signal Human Body Model

±15KV IEC1000-4-2 Air Gap Discharge

±8KV ESD IEC61000-4-2 Contact Discharge

Consumption

Model

1-port: < 0.7W = 5Vx130mA

2-port: < 1.3W = 5Vx250mA

4-port: < 2.5W = 5Vx500mA

Hardware

EUR: CE, US: FCC, Japan: VCCI,

TAIWAN: BSMI

Driver Installation/Verify

Port Setting

After installing USB to Serial Adapter successfully, you can modify the setting for each port in Device Manager.

Troubleshooting

Setup.exe

Copyright©2021 SUNIX Co., Ltd. All Rights Reserved. No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, photocopying, manual, or otherwise, without prior written permission from SUNIX Co., Ltd.

Disclaimer - SUNIX Co., Ltd. shall not be liable for any incidental or consequential damages resulting from the performance or use of this equipment. SUNIX Co., Ltd. makes no representations or warranties regarding the contents of this manual. Information in this manual has been carefully checked for reliability;

however, no guarantee is given as to the correctness of this content. In the interest of continued product improvement, this company reserves the right to revise the manual or include amendments in the speciﬁcations of the product described within it at any time without notice and without obligation to notify

any person of such revision or changes. The information contained in this manual is provided for general use by the customers. Trademarks - SUNIX is a registered trademark of SUNIX Co., Ltd. Other registered marks used herein are for identiﬁcation purposes only and may be trademarks of their respective

owners. BSMI 聲明 - 限用物質含有情況標示資訊網站請參考下列網址：https://www.sunix.com.tw 操作說明：選擇頁面之產品/型號/文件下載區(RoHS文件)。

E-mail for technical suppor t: info@sunix.com

Product information: www.sunix.com

Tel: +886-2-8913-1987

Fax: +886-2-8913-1986

Made in China 771-UTSX009GC-S01

(The number of COM ports will depend on what products you bought)

Proliﬁc PL2303GC USB Serial COM Port (COM14)

Proliﬁc PL2303GC USB Serial COM Port

(2) Please select � �.Driver

(3) Please select � � in the Driver setting.Uninstall

(4) Select �Delete the driver software for this device� to ﬁnish the uninstallation.

(1) You can go to the Device Manager and right click your mouse on the COM port, and select � �.Properties

After installing USB to Serial Adapter successfully, you can modify the setting for each port in Device Manager.

Uninstalling Driver

Update driver

Disable device

Uninstall device

Scan for hardware changes

Properties

USB to RS-232 Serial Adapter

UTS-GC series

User Manual Ver.1

Linux

(1) Please go to SUNIX website for latest driver download.

(2) Please ﬁnd the nearest Linux kernel version ﬁrst.

(3) make all // make a new driver.

(4) sudo rmmod pl2303.ko // remove driver

(5) sudo insmod pl2303.ko // add_1 a new driver

(6) sudo cp pl2303.ko /lib/modules/$(uname r)/kernel/drivers/usb/serial // add_2 a new driver

For latest manual and driver update:

Please visit by searching "UTS, GChttps://www.sunix.com ".

Especificaciones del producto

Marca:	Sunix
Categoría:	Cables para PC y periféricos
Modelo:	UTS1009GC
Color del producto:	Grijs
Ancho:	160 mm
Profundidad:	45 mm
Altura:	100 mm
Código de seguridad internacional (IP):	IP20
Tipo de fuente de energía:	AC
Certificación:	CE\nEN 50083-2, class A
Voltaje de entrada:	230 V
Número:	1
Frecuencia:	50 Hz
Conexión(es):	F
Rango-de-frecuencia:	47 - 862 MHz
Consumo de energía (típico):	6 W
Temperatura de funcionamiento (TT):	-20 - 50 °C
Rango de frecuencia (ruta directa):	47 - 862 MHz
Rango de frecuencia (camino inverso):	5 - 30 MHz
Beneficio (camino de avance):	30 dB
Figura sonora:	14 dB