Supermicro SuperServer 6019P-WTR Manual de Usario
Supermicro
servidor
SuperServer 6019P-WTR
Lee a continuación 📖 el manual en español para Supermicro SuperServer 6019P-WTR (12 páginas) en la categoría servidor. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/12
Information for Lot 9 of ErP (Ecodesign)
This addendum addresses European Union (EU) Ecodesign requirements for servers and storage
products. All data and ratings within this addendum are in reference only to the Supermicro product(s) in
the manual. The below information conforms requirements laid down in Annex II of the Commission to
Regulation 2019/424.
3(1)(a): See section 1.1 of the manual for the product type.
3(1)(b): See the title page and preface of the system manual for the trademark and
manufacturer’s address.
3(1)(c): See the title page of the system manual for product model number(s).
3(1)(d): See the serial number on the physical system to determine the year of manufacture.
3(1)(e-j ): PSU Efficiency and Power Factor Value (Table) (From 80 Plus report)
PSU Model #: PWS-706P- 1R
Watts: 750W
PSU Efficiency
Power Factor
% of Rated Load
10%
20%
50%
100%
50%
Single Output (AC-DC)
88.83%
94.05%
94.64%
91.77%
0.99
System (EUT) Efficiency in Power (Table) Idle State
Representative
Configurations
Measured Idle State
Power (W)
Calculated Idle
Power Allowance (W)
High-End Performance
Configuration
162.5
334.48
Typical Configuration
N/A
N/A
Low-End Performance
Configuration
138.5
246.87
System (EUT) Efficiency in Power (Table) Active State
Representative
Configurations
Active State
Efficiency Score
(Effserver)
Minimum Active State
Efficiency for 2-Socket
Server
High-End Performance
Configuration
29.7
9.5
Typical Configuration
N/A
Low-End Performance
Configuration
24.4
3(1)(k): The operating condition class is A2.
Dry Bulb Temp °C
Humidity Range
(N -Condensing) on
Operating
Condition
Class
Allowable
Range
Recommended
Range
Allowable Range
Dew Point (DP)
Relative Humidity
(RH)
Recommend
Range
Max
Dew
Point
(°C)
Max
Rate of
Change
(°C/hr.)
A1
15 32-
18 27-
– 12 °C DP and 8 %
RH to 17 °C DP and
80 % RH
-9°C DP to
15°C and
60% RH
21
5/20
A2
10 35-
18 27-
– 12 °C DP and 8 %
RH to 21 °C DP and
80 % RH
Same as A1
21
5/20
A3
5- 40
18 27-
– 12 °C DP and 8 %
RH to 24 °C DP and
85 % RH
Same as A1
24
5/20
A4
5- 45
18 27-
– 12 °C DP and 8 %
RH to 24 °C DP and
90 % RH
Same as A1
24
5/20
3(1)(l): The idle state power at the higher boundary temperature of the operating conditions
class: 191.75W.
3(1)(m): The active state efficiency and performance: 29.7.
3(1)(n): There are two methods by which a user can securely delete data from this system. The
user performing secure data deletion should be an IT professional.
The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility
works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.
Any user may access and download this utility through following link:
https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure
_Data_Deletion_Utility/
Download the shell utility package and extract it to a USB flash drive, then plug the drive
into the server for which secure data deletion is necessary. Then turn the system on.
Navigate to the BIOS setup menu, then place the server system into the UEFI shell
environment. Follow the instructions in the README file to invoke the utility and
complete the deletion.
The second method is through the secure data deletion tool provided by the original
manufacturer of the hard drive. This should be used in a scenario where the shell utility
is not applicable. Each manufacturer should have the tool available on their website. If
needed, please look on the hard drive label for the name of the manufacturer and model
information.
3(1)(o): List of recommended combinations of blade servers with chassis: N/A.
3(1)(p): List of all current SKUs within this product family SYS-6019P-WTR. :
3(3)(a): There is no use of cobalt in batteries in this product.
The indicative weight range of Neodymium in the HDD is 0.0 if manufactured by Western
Digital, and is between 5-25 grams if manufactured by Seagate.
3(3)(b): Please see the disassembly instructions on the next page.
Especificaciones del producto
| Marca: | Supermicro |
| Categoría: | servidor |
| Modelo: | SuperServer 6019P-WTR |
¿Necesitas ayuda?
Si necesitas ayuda con Supermicro SuperServer 6019P-WTR haz una pregunta a continuación y otros usuarios te responderán
servidor Supermicro Manuales
27 Octubre 2024
27 Octubre 2024
26 Octubre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
servidor Manuales
- servidor Sony
- servidor HP
- servidor Medion
- servidor Acer
- servidor Allnet
- servidor Apc
- servidor Hikvision
- servidor Asus
- servidor SilverStone
- servidor Megasat
- servidor Lenovo
- servidor Black Box
- servidor Tripp Lite
- servidor Axis
- servidor Gigabyte
- servidor Nec
- servidor Cisco
- servidor AVerMedia
- servidor Matrox
- servidor Fujitsu
- servidor Digitus
- servidor Linksys
- servidor Buffalo
- servidor GeoVision
- servidor Netgear
- servidor QNAP
- servidor LaCie
- servidor Dell
- servidor Valcom
- servidor Asustor
- servidor Planet
- servidor ZyXEL
- servidor Western Digital
- servidor Intel
- servidor Fantec
- servidor D-Link
- servidor Seagate
- servidor Iomega
- servidor Synology
- servidor Blackmagic Design
- servidor ATen
- servidor Conceptronic
- servidor Ibm
- servidor Provision ISR
- servidor Sonnet
- servidor Smart-AVI
- servidor StarTech.com
- servidor SIIG
- servidor Advantech
- servidor Extron
- servidor Avocent
- servidor Intellinet
- servidor Vimar
- servidor Lindy
- servidor Ernitec
- servidor AMX
- servidor Infortrend
- servidor Mr. Signal
- servidor Atlantis Land
- servidor C2G
- servidor Lantronix
- servidor Promise Technology
- servidor HGST
- servidor IStarUSA
- servidor NETSCOUT
- servidor Mobotix
- servidor Origin Storage
Últimos servidor Manuales
26 Octubre 2024
26 Octubre 2024
24 Octubre 2024
24 Octubre 2024
20 Octubre 2024
18 Octubre 2024
18 Octubre 2024
17 Octubre 2024
17 Octubre 2024
16 Octubre 2024