Supermicro SuperServer F628G2-FC0PT+ Manual de Usario

Supermicro servidor SuperServer F628G2-FC0PT+

Lee a continuación 📖 el manual en español para Supermicro SuperServer F628G2-FC0PT+ (158 páginas) en la categoría servidor. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/158

FatTwin®

F628G2-FC0+

F628G2-FC0PT+

USER’S MANUAL

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Revision 1.0a

Release Date: July 18, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the FatTwin™

F628G2-FC0+/FC0PT+ servers. Installation and maintenance should be performed

by experienced technicians only.

The FatTwin F628G2-FC0+/FC0PT+ is a high-end server based on the

F424BG-R2K04BP 4U rackmount chassis and a dual processor X10DRFF-CG/CTG

serverboard. Both models have four serverboard nodes each with an IPMI LAN port

and six (6) hot-swap 2.5" HHD drives each per node. Both servers have SATA3

drives, while the F628G2-FC0PT+ server uses 10-Gigabit LAN ports instead of the

Gigabit LAN ports in the F628G2-FC0+ server.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with

the server system and describes the main features of the X10DRFF-CG/CTG

serverboards and the F424BG-R2K04BP chassis.

Chapter 2: Server Installation

This chap ter desc ribes the steps n ecessary to install the FatTwin

F628G2-FC0+/FC0PT+ servers into a rack and check out the server conﬁ guration

prior to powering up the system. If your server was ordered without processor and

memory components, this chapter will refer you to the appropriate sections of the

manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements for AC Systems

You should thoroughly familiarize yourself with this chapter for a general overview of

safety precautions that should be followed when installing and servicing the FatTwin

F628G2-FC0+/FC0PT+ servers.

Especificaciones del producto

Marca:	Supermicro
Categoría:	servidor
Modelo:	SuperServer F628G2-FC0PT+
Color del producto:	Zwart
Peso del embalaje:	4800 g
Ancho del embalaje:	486 mm
Empaquetadura en profundidad:	104 mm
Altura del embalaje:	345 mm
Manual de usuario:	Ja
Bluetooth:	Nee
Diagonal de la pantalla:	19 "
Resolución:	1440 x 900 Pixels
Pantalla táctil:	Nee
Relación de aspecto original:	16:10
red LAN:	Nee
Ángulo de visión, horizontal:	150 °
Ángulo de visión, vertical:	150 °
Cables suministrados:	VGA
Relación de contraste típica:	1000:1
Guía de inicio rápido:	Ja
Rango de frecuencia horizontal:	30 - 80 kHz
Rango de frecuencia vertical:	55 - 75 Hz
Puerto(s) VGA (D-Sub):	1
Opción de montaje de bloqueo de cable:	Nee
Altavoces incorporados:	Ja
Energía promedio:	2 W
Número de hablantes:	2
Certificación:	CE, TUV/GS, CSA, FCC, CCC, TCO’03, RoHS
Pantalla, número de colores.:	16.78 miljoen kleuren
tipo HD:	Niet ondersteund
3D:	Nee
hdmi:	Nee
Tiempo de respuesta:	5 ms
Resoluciones de gráficos compatibles:	1440 x 900 (WXGA+)
Montaje VESA:	Ja
Interfaz de montaje en panel:	100 x 100 mm
Puertos DVI-D:	1
Certificados de sostenibilidad:	ENERGY STAR
Brillo (típico):	300 cd/m²
relación de aspecto:	16:10
Diámetro efectivo de la imagen:	408 x 255 mm
Sintonizador de TV integrado:	Nee
Cámara integrada:	Nee
Profundidad (sin base):	- mm
Altura (sin base):	- mm
Ancho (sin base):	- mm
Peso (sin base):	- g
Ancho del dispositivo (con soporte):	437 mm
Dispositivo de profundidad (con soporte):	191 mm
Altura del dispositivo (con soporte):	374 mm
Peso (con soporte):	4200 g
Visualización en pantalla (OSD):	Ja
Cliente ligero instalado:	Nee
Banda-ancha:	0.135 GHz
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (típico):	45 W