Sure-Fi DS007-ANALOG Manual de Usario

Sure-Fi No categorizado DS007-ANALOG

Lee a continuación 📖 el manual en español para Sure-Fi DS007-ANALOG (21 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/21

SURE-FI, INC. | www.sure-fi.com

Sure- Analog Bridge Fi

Operators Manual

Doc #PI0254 Rev 1.0

SURE-FI, INC. | www.sure-fi.com

Sure- Analog Bridge Fi

Quick Startup

The two units that are packaged together are factory paired and will only

communicate with each other.

Check initial operation

Connect the battery (included) the power cable (included) and plug the two-position connector 9V to 9V in to

the +V and -VIN positions the bottom connector each unit. Once both units are powered the ‘IN’ ‘ ’ on of up,

green POWER LED should solid each unit. Press and quickly release the button test be ON on ‘TEST’ to

communication between the two units. One more the blue Signal-Strength LEDs should light for one or of up

second indicate that successful communication has occurred. to

Perform a Range-Test from the desired install locations

With the batteries plugged each the units, place them the desired install location points and 9V in to of at

perform a Range-Test pressing and quickly releasing the button. The received signal strength by ‘TEST’ is

displayed for one second the six blue LEDs with the bottom LED indicating the minimum signal strength and on

all six LEDs indicating maximum signal strength.

Connect permanent power to

Before connecting each unit to the permanent power source, ensure that the 30VAC/VDC range it is in 12 to

and can source least 1 ampere. Connect the power each unit and perform several Range-Tests check at at to

for adequate input power.

Wire the input and output functions

Using manual a reference, wire the required devices each this as at unit.

SURE-FI, INC. | www.sure-fi.com

Sure- Analog Bridge Fi

Table Contents of

Part Numbers

Pg. 5

Product Overview

Pg. 5

Key Features

Pg. 5

General Specifications

Pg. 6

Radio Transceiver Specifications

Pg. 6

Device Overview, Analog Receiver Interface

Pg. 7

Device Overview, Analog Sensor Interface

Receiver Interface Top & Bottom Connector pin descriptions –

Pg. 8

Pg. 9

Sensor Interface Top & Bottom Connector pin descriptions –

Pg. 10

Analog Channels

Pg. 11

Analog and Sampling Ranges, Settings, and Thresholds

Pg. 12

Relays: Operating the Relays, Relay Control

Pg. 13

Digital Inputs and Outputs (IN 2 / OUT OUT 1, IN 1, 2)

Pg. 13

Test (Range Test) Push Button

Pg. 13

LEDS: Power, Battery, Tx, Rx

Pg. 13

Antenna information

Pg. 13

Connector plug information and part numbers

Pg. 14

Chaining Multiple systems together for extended range

Pg. 14

Mounting

Pg. 15

Troubleshooting and manually testing the Relays

Pg. 17

Sure- downloading, installing, connecting Fi APP,

Pg. 18

Sure- Firmware Updating Fi APP:

Pg. 19

Sure- System Heartbeat time Fi APP:

Sure- Setting a Relay default state, timeout, and setting Alert Relay Fi APP: an

Pg. 19

FCC and Industry Canada Regulatory Statements

Pg. 20

Warranty

Pg. 21

Especificaciones del producto

Marca:	Sure-Fi
Categoría:	No categorizado
Modelo:	DS007-ANALOG
Color del producto:	Grijs
Amable:	Achterlicht + voorlicht (set)
Tipo de fuente de energía:	Batterij/Accu
Impermeable:	Ja
Toma de carga USB:	Ja
Batería recargable:	Ja
Número de efectos de iluminación:	8
Peso ligero trasero:	17 g
Tiempo de funcionamiento (flash):	60 uur
Peso ligero delantero:	17 g
Flujo luminoso (luz delantera):	50 lm
Flujo luminoso (luz trasera):	25 lm
Dimensiones de la luz delantera (AnxPrxAl):	33 x 31 x 40 mm
Dimensiones de las luces traseras (AnxPrxAl):	33 x 31 x 40 mm