SurgeX SA-82 Manual de Usario

Lee a continuación 📖 el manual en español para SurgeX SA-82 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
SurgeX
Installation Instructions
SA82 F
Fl
la
at
tP
Pa
ak
k
120 Volt Connections
The SurgeX SA82 is designed to operate from a 120V AC service. Power up the unit by
connecting the power cord supplied with the unit and then plug into a 120V ac receptacle.
The SA82 is rated for a maximum load of 8 amps. Plug up to two equipment power cords into
the yellow receptacles as needed to provide safe, filtered power to the equipment.
Under no circumstances should the product be used with a “ground lifter” or any other device
which disconnects ground from the SurgeX. Doing so will create a safety hazard and could
constitute danger to life.
Indicator Lights
The green Self-Test light indicates that power is applied to the unit and the internal surge
protection circuitry is fully functional. If this light is not on when the unit is plugged into the AC
check that AC is present at the receptacle where the unit is plugged in.
If at any point the Self-Test light should go out, first make sure that AC is present at the
receptacle where the unit is plugged in. If the light is still off once this has been checked then it
will be necessary to return the unit to SurgeX for repair.
The red Power light indicates that AC power is available at the two yellow receptacles. This light
will go out if the AC voltage rises above 145 Volts and power will be interrupted in order to
protect connected equipment. When the AC voltage returns below 135 Volts power will be
automatically restored to the yellow receptacles and the red Power light will once again be lit.

Especificaciones del producto

Marca: SurgeX
Categoría: No categorizado
Modelo: SA-82
Color del producto: Zwart
Peso.: 13000 g
Ancho: 690 mm
Profundidad: 170 mm
Altura: 3280 mm
Peso del embalaje: 13800 g
Ancho del embalaje: 185 mm
Empaquetadura en profundidad: 1610 mm
Altura del embalaje: 175 mm
Amable: Vaste vloerstandaard
Material de la carcasa: Aluminium, Steel
Tipo de embalaje: Doos
Ajustable en altura: Ja
Método de montaje: Vloer
Capacidad máxima de peso: 30 kg
Certificación: CE
Interfaz de montaje en panel: 100 x 100,600 x 400,800 x 600 mm
Ángulo de rotación: 360 °
Compatibilidad de la interfaz de montaje (min): 100 x 100 mm
Compatibilidad de la interfaz de montaje (máx.): 800 x 600 mm
Número de pantallas admitidas: 1
Gestión de cables mejorada: Ja
Peso del embalaje de envío (interior): 13800 g
Rango de ángulo de inclinación: 0 - 15 °
Tamaño máximo de pantalla: 65 "
Altura del paquete de envío (interior): 175 mm
Ancho del paquete de envío (interior): 185 mm
Longitud del paquete de envío (interior): 1610 mm
Productos por embalaje de envío (interior): 1 stuk(s)
Tamaño mínimo de pantalla: 40 "
Rango de ajuste de altura: 580 - 1550 mm
Tipo de ajuste de altura: Handmatig
Longitud del tubo de montaje en techo (máx.): 155 cm
Longitud del tubo de montaje en techo (mín.): 58 cm

¿Necesitas ayuda?

Si necesitas ayuda con SurgeX SA-82 haz una pregunta a continuación y otros usuarios te responderán




No categorizado SurgeX Manuales

No categorizado Manuales

Últimos No categorizado Manuales