Sylvania 6240CV1 Manual de Usario

Sylvania Videograbadora 6240CV1

Lee a continuación 📖 el manual en español para Sylvania 6240CV1 (8 páginas) en la categoría Videograbadora. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

IMPORTANT

SAFEGUARDS

PRECAUTIONSDESCRIPTION

OF CONTROLS

PREPARATION

FOR USE

SETUPPLAYBACK

FUNCTION

RECORDING

FUNCTION

SPECIAL

FEATURES

WARRANTYINSTRUCCIONES

EN ESPAÑOL SPECIFICATIONS

MAINTENANCE

TROUBLESHOOTING

GUIDE

OWNER’S MANUAL

VIDEO CASSETTE

RECORDER

If you need additional

operating assistance after

reading this owner's manual

or to order replacement

accessories, please call

TOLL FREE : 1-800-968-3429.

6240VC1

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of suffi-

cient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of impor-

tant operating and maintenance (servicing) instruc-

tions in the literature accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

1. Read Instructions-All the safety and operating instructions should be

read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions should be

retained for future reference.

3. Heed Warnings- All warnings on the appliance and in the operating

instructions should be adhered to.

4. Follow Instructions-All operating and use instructions should be

followed.

5. Cleaning- Unplug this video product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that

for some specific reason, such as the possibility of the loss of an

authorization code for a CATV converter, is not intended to be

unplugged by the user for cleaning or any other purpose, may exclude

the reference to unplugging the appliance in the cleaning description

otherwise required in item 5.

6. Attachments- Do not use attachments not recommended by the video

product manufacturer as they may cause hazards.

7. Water and Moisture- Do not use this video product near water, for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, and the like.

8. Accessories- Do not place this video product on an unstable cart,

stand, tripod, bracket, or table. The video product may fall, causing

serious injury to a child or adult, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the

video product. Any mounting of the appliance should follow

the manufacturer's instructions and should use a mounting

accessory recommended by the manufacturer. An

appliance and cart combination should be moved with

care. Quick stops, excessive force, and uneven surfaces

may cause the appliance and cart combination to overturn.

9. Ventilation- Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the video product and to

protect it from overheating, and these openings must not be blocked or

covered. The openings should never be blocked by placing the video

product on a bed, sofa, rug, or other similar surface. This video product

should not be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer's instructions

have been adhered to .

10. Power Sources- This video product should be operated only from the

type of power source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your appliance dealer

or local power company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

11. Grounding or Polarization- This video product is equipped with a

polarized alternating-current line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way. This

is a safety feature. If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

12. Power Cord Protection- Power supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or

against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding- If an outside antenna or cable system is

connected to the video product, be sure the antenna or cable system is

grounded so as to provide some protection against voltage surges and

built-up static charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding conductors, location

of antenna-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

14. Lightning- For added protection for this video product during a lightning

storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the video product due to lightning

and power-line surges.

15. Power Lines-An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or power circuits, or

where it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be fatal.

16. Overloading- Do not overload wall outlets and extension cords as this

can result in a risk of fire or electric shock.

17. Object and Liquid Entry- Never push objects of any kind into this video

product through any openings as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric shock. Never

spill liquid of any kind on the video product.

18. Servicing- Do not attempt to service this video product yourself as

opening or removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service personnel.

19. Damage Requiring Service- Unplug this video product from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the video product.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the video product to its normal operation.

e. If the video product has been dropped or damaged in any way.

f. When the video product exhibits a distinct change in performance-this

indicates a need for service.

20. Replacement Parts- When replacement parts are required, be sure the

service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other

hazards.

21. Safety Check- Upon completion of any service or repairs to this video

product, ask the service technician to perform safety checks to

determine that the video product is in proper operating condition.

22. Heat- This video product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND

CLAMP

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

S2898A

– 2 – EN

PRECAUTIONS DESCRIPTION

OF CONTROLS

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION:

POUR ÉVITER LES CHOC ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA

FICHE DANS LA BORNE CORRESPONDANTE

DE LA PRISE ET POUSSER JUSQU’AU FOND.

1. POWER button

2. NUMBER buttons

3. MENU button

4. DISPLAY button

5. SLOW button

6. REW button

7. STOP button

8. RECORD button

9. PAUSE/STILL button

10. F.FWD button

11. PLAY button

12.

COUNTER/MEMORY

button

13. EXIT/RESET button

14. SEARCH MODE button

15. CHANNEL buttons

16. VCR/TV button

17. EJECT button

( )

22. AC Power Cord

23. AUDIO OUT jack

24. AUDIO IN jack

25. ANT. IN jack

26. VIDEO OUT jack

27. VIDEO IN jack

28. CH3/CH4 selector switch

29. ANT. OUT jack

Front Panel

Display Window

F.FWD

PAUSE

STILL

REW

CHANNELTAPE SPEED

POWERVIDEO AUDIO VCR/TV POWER VCR/TV TAPE IN TIMER REC

PLAY

REC

OTR

1 2 4 5 63

1314 11 10 9 8 71216 15

17 18 19 20 21

POWER VCR/TV TAPE IN TIMER REC

Remote Control

POWER VCR/TV

1 2 3

4 5 6

CHANNEL

7 8 9

0 +100

SEARCH MODE

DISPLAY SLOW

PLAY

REW F.FWD

STOP

RECORD

PAUSE/STILL

EXIT

COUNTER

MEMORYRESET

EJECT

Rear Panel

ANT

AUDIO

VIDEO

OUT

OUT IN

CH3 CH4

22 23 24 25

26 27 2928

INSTALL LOCATION

For safety and optimum performance of your VCR:

• Install the VCR in a horizontal and stable position.

Do not place anything directly on top of the VCR.

Do not place the VCR directly on top of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes

on the sides of the VCR. Avoid locations subject to

strong vibration or strong magnetic fields.

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your VCR, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

• Do not put your fingers or objects into the VCR

cassette holder.

MOISTURE CONDENSATION WARNING

Moisture condensation may occur inside the unit when it is

moved from a cold place to a warm place, or after heating

a cold room or under conditions of high humidity. Do not

use the VCR at least for 2 hours until its inside is dry.

FCC WARNING

This equipment may generate or use radio frequency

energy. Changes or modifications to this equipment may

cause harmful interference unless the modifications are

expressly approved in the instruction manual. The user

could lose the authority to operate this equipment if an

unauthorized change or modification is made.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast television

programming, video tape, film or other copyrighted

material may violate applicable copyright laws. We assume

no responsibility for the unauthorized duplication, use, or

other acts which infringe upon the rights of copyright

owners.

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable

and can be reused. Please dispose of any materials

in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated

but disposed of in accordance with your local

regulations concerning chemical wastes.

Note to the Cable TV System Installer:

This reminder is provided to call the Cable TV system

installer’s attention to Article 820-40 of the National

Electrical Code, which provides guidelines for proper

grounding – in particular, specifying that the cable ground

shall be connected to the grounding system of the

building, as close to the point of cable entry as possible.

Install two AA

batteries matching

the polarity indicated

inside the battery

compartment.

1. Cassette Compartment

2. STOP/EJECT button

3. REW button

4. PLAY button

5. F.FWD button

6. PAUSE/STILL button

7. MENU button

8. REC/OTR button

9. CHANNEL buttons

10. TAPE SPEED button

11. Display Window

12. Remote Sensor

13. VCR/TV button

14. POWER button

15. AUDIO Input jack

16. VIDEO Input jack

17. POWER indicator

18. VCR/TV indicator

19. TAPE IN indicator

20. TIMER indicator

21. REC indicator

PRECAUTIONS DESCRIPTION OF CONTROLS

To insert the batteries

– 3 – EN

PREPARATION

FOR USE

SETUP

4Select the On Screen Language

("ENGLISH" or "ESPAÑOL")

by pressing [PLAY] or [STOP]. Then, press

[F.FWD].

5Begin channel preset

by pressing [F.FWD] once. The tuner scans

and memorizes all active channels in your

area.

• The VCR distinguishes between standard

TV channels and cable channels.

6After scanning,

the tuner stops on the lowest memorized channel. The TV

screen returns to TV mode.

• If "AUTO SET UP" appears on the TV screen again, check

the cable connections. Press [F.FWD] once again and the

VCR will begin preset again.

You can select the desired channel by using [CHANNEL

] or directly pressing [Number] on the remote

control.

Note for using the Number buttons:

• When selecting cable channels which are higher than

99, press [+100] first, then press the last two digits.

• You must precede single-digit channel numbers with a

zero (For example: 02, 03, 04 and so on).

( )

ACCESSORIES PART NO.

Coaxial Cable WPZ0901TM002

Remote Control Unit NA301UD/NA351UD

Batteries AA x 2

1Check contents

Make sure the package contains all of the accessories

listed in as below.

2Situate VCR

Place the VCR in a stable, horizontal surface.

3Connect VCR to TV

SUPPLIED ACCESSORIES

VCR to AV TV connection using AUDIO/VIDEO Cables

VCR to TV Connection

1. Disconnect the AC power cord of the TV from the AC

outlet.

2. Disconnect the antenna or cable from the TV.

3. Connect the antenna or cable to the ANT. IN jack of

the VCR.

4. Connect the VCR to the TV using the coaxial cable.

5. Plug the AC power cords of the VCR and TV into the

AC outlets.

OUT

ANT

[VHF/UHF

combination antenna] [Back of the VCR]

IN OUT

[Cable box or satellite box]

[Indoor antenna] [Back of the

UHF/VHF combination TV]

UHF/VHF

Coaxial cable

(supplied)

From Cable or

Satellite Company

If your TV does not have A/V terminals:

When the VCR is in the Playback mode or when the

VCR is in the VCR mode, your TV will receive signals

from the VCR on either channel 3 or 4. To use the VCR

with your TV, set the selector switch to CH3 or CH4

(which is located in the back of

your VCR), whichever is not

used for normal broadcasts in

your area. Then set your TV to

the same channel.

CH3

OUT

CH3 CH4 CH4

[Back of the VCR]

You can automatically program the tuner to scan only

the channels you receive in your area.

•

Channel memory programming is NOT needed when you

connected the VCR to a cable box or satellite box as in

"Connect VCR to TV". In this case, select the VCR and

TV to channel 3 or 4 the same channel as the CH3 or

CH4 switch on the back of the VCR. Then, the channel

you want to record or view may be selected at the cable

box or satellite box.

•

Follow the steps below once. Repeat it only if there is a

power failure or if the VCR is unplugged for more than 30

seconds. (In these cases, the programmed channels are

erased.)

• You must follow the steps below before attempting to

play or record a video tape. If you want to play or

record a video tape BEFORE programming the tuner,

you can cancel it by pressing [EXIT/RESET].

1You need to connect the antenna or cable to the VCR

first. Then, connect the VCR power plug into a

standard AC outlet.

2Turn on the TV and set the TV to channel 3 or 4.

Now set the CH3/CH4 switch on the back of the VCR to

match the channel selected on the TV.

3Turn on the VCR by pressing [POWER]. It comes on that

both the POWER and the VCR/TV indicator.

AUTOMATIC CHANNEL SET UP

AUTO SET UP

CH 01

Using Optional AUDIO/ VIDEO Output Jacks

With this connection, you can get better pictures and

sounds when playing back a tape if your TV has A/V

Input jacks. Please refer to your TV’s owner’s manual.

Using AUDIO/VIDEO Input Jacks

You can use the A/V input jacks on the front or the back

of the VCR.

• To use the input jacks on the back of the VCR, select

"L1" position by pressing [0], [0], [1] on the remote

control or [CHANNEL ].

• To use the input jacks on the front of the VCR, select

"L2" position by pressing [0], [0], [2] on the remote

control or [CHANNEL ].

( )

“L1” or “L2” is found

before the lowest

memorized channel.

(Example: CH2)

[Playing VCR]

[TV A/V]

Audio/Video

cables

(not supplied)

AUDIO

L R

VIDEO

OUT IN

AUDIO

PREPARATION FOR USE

SETTING THE CH3/CH4 SWITCH

SETUP

O SELECT A DESIRED CHANNEL

Especificaciones del producto

Marca:	Sylvania
Categoría:	Videograbadora
Modelo:	6240CV1
Color del producto:	Zwart
Longitud del cable:	2.1 m
Conexión(es):	1x PowerTap (M) - 4x PowerTap (F)
Número de salidas de CA:	- AC-uitgang(en)