Syma X25PRO Manual de Usario

Syma No categorizado X25PRO

Lee a continuación 📖 el manual en español para Syma X25PRO (18 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/18

USER MANUAL

12+

MAIN FEATURES

GYRO REMOTE CONTROL SERIES

● Utilizes the 4-axis structure, enabling the drone to be even more flexible ,speedy,

and possessing a relatively stronger wind-withstanding capability. It suitable for

both spacious indoor and outdoor areas.

● Built-in 6-axis gyro stabilizer to ensure the accuracy of in-flight position.

● The structure uses a modular design which makes it easier to install and repair.

● With the functions of outdoor GPS fixed-point, one key return, auto return when

the drone is out of control or in low-voltage, one key ascent/descent, geomagnetic

headless, position hovering mode and 4 channels function which are up/down ,

rise/decline,turn left/right, forward/backward, left/right side flight, follow me, circle

flight .

● HD wifi real-time transmission for getting the fun of different photography.

-1-

1.Use dry and soft cloth to clean this product.

2.Avoid exposing this product to heat.

3.Do not immerse this product in water, otherwise, the electronic parts will be

damaged.

4.Transformers used with the toy are to be regularly examined for damage to the

cord,plug,enclosure and other parts,and that,in the event of such damage,the toys

must be used with this transformer until the damage has been repaired.

Safety Guide

Repair and maintenance

1.Please store the smaller-sized drone accessories in places that are out of

reach of children.

2.This drone is very powerful. For all first-time flights, the left joystick must be

slowly pushed up in order to prevent the drone from ascending too fast to

avoid unnecessary collision and possible damage and injury.

3.When the flight is ended, first turn off the power of the remote control.

Then turn off the power of the drone.

4.Avoid placing the batteries in places with high temperatures and exposure

to heat.

5.Take extra precaution to ensure that the drone is at a minimum distance of

15 feet from the pilot, other people, and animals in order to prevent bodily

injury during flight operation. A minimum separation distance of 20 cm must

be maintained between the user’s body and the device under normal use

condition.

6.This drone is for people ages 12+. It must be flown always within the line of

sight of the pilot(or instructor) and flown safely.

7.Non-rechargeable batteries are not to be recharged; Batteries are to be

inserted with the correctpolarity; Different types of batteries or new and

used batteries are not be mixed.

8.When the drone is not in use, please remove the batteries in the remote

control.

9.The supply terminals are not be short-circuited.

10.Discharge the battery to 40%-50% (On a full charge, fly for half of the total

flight time) if it will not be used for 10 days or more, this can greatly extend

the battery life.

11.Please keep a safe distance from the spinning propellers to avoid injury.

12.To ensure the electromagnetic environment requirement of the aviation

radio (station), using remote controls in the zone, which is in a radius of

about 5000m zone from the circle center of the airport runway, is forbidden.

All users also should abide by the regulation of the radio set forth by

government and regulatory agencies including the duration and area.

13.Only uses the recommended transformer for the model, and the transformer

is not a model. Disconnect the transformer from the model which is available

cleaning with liquids before cleaning. Check the cord, plug, enclosure and

other parts of the transformer regularly. If any damages have been

discovered, please immediately stop using it, until it was completely repaired.

14.Never look steadily at the laser beam since the laser radiation.

15.Attention Drone assembly under adult supervision.：

16.The pilot is responsible for the safe operation and safe distance from

uninvolved persons and property on the ground and from other airspace

users and shall never fly the drone above crowds (> 12 persons).

17.Open the battery cover of the toy with screwdriver.

18.The packing has to be kept since it contains important information.

-2-

Blade’s installation

Protective Gear’s Installation

Blade and Protective Gear’s Installation Methods

Camera’s Installation and

Dismantling Methods

Installation steps for camera

The following items can be found in this product package:

Package description

●Drone

●Remote Control

●User Manual

●4 Blades

●USB Charger

●4 Protective Gears

●Mobile Phone Retaining Clip

1.Connect the camera’s wire

connector to the drone.

2.Place the camera into the drone and

rotate the camera counterclockwise to

lock.

Press the blade lock down, and then the blade "A" is

rotated in A clockwise direction to remove, and it is

locked in A counterclockwise rotation;The blade B is

rotated in A counterclockwise to remove, and it is locked

in A clockwise rotation.

1. Insert the protective gear into the

two jack connectors underneath the

main body as shown in Figure 1.

2. Insert the stem on the protective

gear into the jack connector on the

main body as shown in Figure 2 and

press it.

Especificaciones del producto

Marca:	Syma
Categoría:	No categorizado
Modelo:	X25PRO
Color del producto:	Wit
Peso.:	5500 g
Ancho:	380 mm
Profundidad:	230 mm
Altura:	360 mm
Peso del embalaje:	7000 g
Ancho del embalaje:	405 mm
Empaquetadura en profundidad:	420 mm
Altura del embalaje:	260 mm
Diagonal de la pantalla:	15.1 "
Resolución:	1024 x 768 Pixels
Pantalla táctil:	Ja
Frecuencia del procesador:	2 GHz
Familia de procesadores:	Intel® Celeron®
Modelo de procesador:	J1900
Número de núcleos de procesador:	4
Adaptador gráfico:	HD Graphics
red LAN:	Ja
Brillo:	250 cd/m²
Número de puertos USB 2.0:	5
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	1
Certificación:	RoHS, CE
Pantalla, número de colores.:	16,2 miljoen kleuren
Memoria interna:	4 GB
Medios de almacenamiento:	HDD+SSD
Tipo de memoria interna:	DDR3L-SDRAM
Montaje VESA:	Ja
Interfaz de montaje en panel:	75 x 75 mm
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Soporta Windows:	Windows 10, Windows 7, Windows 8, Windows 8.1
Hilos internos del procesador:	4
Caché del procesador:	2 MB
Capacidad total de almacenamiento:	1064 GB
Capacidad SSD:	64 GB
Tipo de vivienda:	Alles-in-een
Memoria de velocidad de reloj:	1600 MHz
interfaces SSD:	M-SATA
Salida de línea:	Ja
Entrada de línea:	Ja
Capacidad del disco duro:	1000 GB
Interfaz de disco duro:	SATA
Tecnología de pantalla táctil:	Capacitief
Tipo de ranura de memoria:	SO-DIMM
Adaptador gráfico, fabricante:	Intel
Tamaño del disco duro:	2.5 "
Puertos seriales):	4
Temperatura de funcionamiento (TT):	-10 - 60 °C
Humedad relativa de funcionamiento (VV):	0 - 95 procent
Tipo-de-visualización:	LCD