Tascam if-fw dm FIRE WIRE Manual de Usario

Tascam sistema de audio if-fw dm FIRE WIRE

Lee a continuación 📖 el manual en español para Tascam if-fw dm FIRE WIRE (12 páginas) en la categoría sistema de audio. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
»D00830000B
OWNER'S MANUAL
IF-FW/DM
FireWire Interface Card
2 TASCAM IF-FW/DM Owner's Manual
SETUP ........................................7
IF-FW/DM Interface Setup ...............7
CUBASE / NUENDO .....................7
SONAR ..........................................7
LOGIC ...........................................7
DIGITAL PERFORMER .................7
SYSTEM CLOCKING ........................8
MASTER CLOCK ..........................8
CLOCK SETTINGS .......................8
96 k & 88.2 k Operation ............8
IF-FW/DM & MIXER ROUTING ........8
MIXER OUTPUTS .........................8
DM-3200 ...................................8
DM-24 .......................................9
MIXER INPUTS .............................9
DM-3200 ...................................9
DM-24 .......................................9
THE IF-FW/DM CONTROL PANEL
(WINDOWS) ................................10
ENABLE WDM ............................11
Table of contents
INTRODUCTION .......................2
FEATURES ........................................3
SYSTEM REQUIREMENTS ..............3
Macintosh .....................................3
Windows .......................................3
DM-3200 Requirements ...............3
DM-24 Requirements ...................3
Trademarks ...................................3
INSTALLATION ..........................4
CONFIGURE FOR YOUR MIXER .....4
INSTALLING THE IF-FW/DM ............4
MAKING CONNECTIONS .................5
CONFIGURING THE COMPUTER ....5
Macintosh .....................................5
Windows .......................................6
Windows 64-Bit ............................6
Thank you for purchasing the TASCAM
IF-FW/DM FireWire audio card for
TASCAM mixers. It is designed to provide
audio and MIDI interfacing between your
TASCAM mixer and your computer based
DAW, essentially turning your TASCAM
mixer into a FireWire audio/MIDI interface.
Please take some time to look through this
Owner’s Manual and familiarize yourself
with the IF-FW/DM’s features, setup and
operation. We suggest you pay particular
attention to the setup notes for your com-
puter platform of choice (Mac or PC). You
may also need to refer to your software’s
documentation for a clear understanding of
how to set up an audio/MIDI interface from
within your software. Your experience with
the IF-FW/DM will be greatly enhanced by a
good working knowledge of your audio soft-
ware.
Be sure to check the TASCAM web site at
www.tascam.com to ensure you have the
latest software updates for your IF-FW/DM.
Introduction
O
TASCAM IF-FW/DM Owner's Manual 3
Introduction
The IF-FW/DM provides the following inter-
facing between your TASCAM mixer and a
host computer via FireWire:
• 24 channels of Input to the mixer from the
computer at 44.1k and 48k sample rates
• 24 channels of Output from the mixer to
the computer at 44.1k and 48k sample
rates
• 1 MIDI port In and Out from the com-
puter
Features
Macintosh
• OS: MacOS X 10.3.5 or higher
• Computer: Apple Macintosh series with
on-board FireWire
• Minimum: G4/800 MHz
• Recommended: Dual G4/1 GHz or higher
• Memory (RAM): 256MB or more
Windows
• OS: Microsoft® Windows® XP Home
Edition or XP Professional with Service
Pack 2
• Computer: Windows® XP Compatible
PC equipped with an IEEE 1394/FireWire
Port
• Minimum: Pentium®, Celeron®, or
Pentium® compatible processor 1.5 GHz
or higher
• Recommended: Pentium® IV/2 GHz or
higher
• Memory (RAM): 256MB or more
DM-3200 Requirements
The DM-3200 must be running software
V1.20 or higher to use the IF-FW/DM.
Please refer to www.tascam.com to obtain
this update. Do not proceed to install the
IF-FW/DM until your DM-3200 is running
V1.20 or higher.
DM-24 Requirements
The DM-24 must be running V3.00 software
to use the IF-FW/DM. Please refer to www.
tascam.com or your local service center to
obtain this update. Do not proceed to install
the IF-FW/DM until your DM-24 is running
V3.00 or higher.
System Requirements
Windows and Windows XP are trademarks
of Microsoft Corporation.
Macintosh, MacOS, MacOS X and FireWire
™ are trademarks of Apple Computer.
All other trademarks are the property of their
respective holders.
Trademarks

Especificaciones del producto

Marca: Tascam
Categoría: sistema de audio
Modelo: if-fw dm FIRE WIRE

¿Necesitas ayuda?

Si necesitas ayuda con Tascam if-fw dm FIRE WIRE haz una pregunta a continuación y otros usuarios te responderán


sistema de audio Tascam Manuales

Tascam

Tascam if-fw dm FIRE WIRE Manual de Usario

8 Septiembre 2024
Tascam

Tascam 202MKVI Manual de Usario

8 Septiembre 2024

sistema de audio Manuales

Últimos sistema de audio Manuales

Zoom

Zoom 9010 Manual de Usario

27 Octubre 2024
Kenwood

Kenwood ud 751 Manual de Usario

22 Octubre 2024
Arcam

Arcam rPAC Manual de Usario

20 Octubre 2024
Arcam

Arcam airDAC Manual de Usario

18 Octubre 2024
Yamaha

Yamaha NX-P100 Manual de Usario

18 Octubre 2024
Samson

Samson Media One 10S Manual de Usario

18 Octubre 2024
Samson

Samson Conspiracy Manual de Usario

18 Octubre 2024
Samson

Samson Resolv A8 Manual de Usario

18 Octubre 2024
Lynx

Lynx LT-Madi Manual de Usario

5 Octubre 2024
Lynx

Lynx LT-ADAT Manual de Usario

26 Septiembre 2024