Techno Line WS 7014 IT Manual de Usario

Techno Line Estación meteorológica WS 7014 IT

Lee a continuación 📖 el manual en español para Techno Line WS 7014 IT (21 páginas) en la categoría Estación meteorológica. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/21

WIRELESS 433 MHz WEATHER STATION

Instructions Manual

INTRODUCTION:

Congratulations on purchasing this Weather Station with wireless 433 MHz transmission of outdoor

temperature and display of indoor temperature and humidity, weather forecast icons and weather tendency

indicators. It is further featuring a DCF-77 radio controlled clock with calendar display. With only four easy to

use function keys, this innovative product is ideal for use in the home or office.

The Weather Station

Battery Cover

Hanging Hole

Detachable Stand

LCD Display

Function

Keys

FEATURES:

WEATHER STATION

• DCF-77 Radio controlled time with manual setting options

• Time reception ON/OFF

• 12/24 hour display

• Hour and minute display, seconds indicated by flashing dot

• Time zone option ±12hours

• Date and month calendar display

• Weather forecasting with 3 weather icons and weather tendency indicator

• Weather forecasting icon sensitivity setting

• Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable

• Indoor and outdoor temperature display with MIN/MAX recording

• Indoor humidity reading displayed as RH% with MIN/MAX recordings

• All MIN/MAX temperature recordings show date and time received

• All MIN/MAX recordings can be reset

• Indoor comfort level indicator - happy or sad face icons

• Can take up to three outdoor transmitters

• LCD contrast setting

• Low battery indicator

• Wall mounting or table standing

THE OUTDOOR TRANSMITTER

Holder

• Remote transmission of outdoor temperature to weather station by 433 MHz signal

• Wall mounting case

• Mounting at a sheltered place. Avoid direct rain and sunshine

SETTING UP:

1. First, insert the batteries into the Weather station (see “How to install and replace batteries in the

Weather Station” below). Once the batteries are in place, all segments of the LCD will light up briefly.

Following some test data display, the indoor temperature and humidity, the time as 0:00 the date as

1.1. and the weather icons sun and clouds will be displayed. If the indoor temperature and humidity

are not displayed after 30 seconds, remove the batteries and wait for at least 10 seconds before

reinserting them. Once the indoor data is displayed proceed to step 2.

2. Within 3 minutes of activating the Weather station, place the batteries into the transmitter (see “How

to install and replace batteries in the Temperature Transmitter” below).

3. After a few seconds of inserting the batteries into the transmitter, the Weather Station will start

receiving data from the transmitter. The remote temperature will then be displayed on the Weather

Station. If this does not happen after 15 minutes, the batteries will need to be removed from both

units and reset from step 1.

4. The Weather Station can take up to 3 remote transmitters. If you have purchased additional

transmitters, follow step 2 for all extra transmitters. However, ensure that you leave 10 seconds in

between the reception of the last transmitter and the set-up of the following transmitter. The Weather

Station will number the transmitters in the order of set-up, i.e. the first transmitter will have the

temperature displayed with the number 1 against it and so on.

5. When all the transmitters are set up, there is a testing period, during which the display switches

quickly between all the received transmitters at random, according to which random transmission it

receives. Pressing any key will stop this process. The process also stops automatically if no keys are

pressed for a few minutes.

6. Once the remote temperature has been received and is displayed on the Weather Station, the DCF-

77 time code reception is automatically started. This takes typically between 3 - 5 minutes in good

Especificaciones del producto

Marca:	Techno Line
Categoría:	Estación meteorológica
Modelo:	WS 7014 IT
Color del producto:	Beige, Brown
Ancho:	92 mm
Profundidad:	25 mm
Altura:	92 mm
Amable:	Ventilator
Nivel de ruido (alta velocidad:	17.1 dB
Flujo de aire máximo:	64.6 cfm
numero de fans:	1 ventilator(en)
Abarcando:	12 V
Velocidad de rotación (máx.):	1600 RPM
Tiempo medio entre fallos (MTBF):	150000 uur
Conexión(es):	3-pin
Ubicación adecuada:	Computer behuizing
Consumo de energía (típico):	0.84 W
Código del Sistema Armonizado (SA):	84733080
Diámetro del ventilador:	92 mm
Actual (máx.):	0.07 A
Presión de aire máxima:	1.62 mmH2O