Technomate TM-8000 HD Manual de Usario
Technomate
receptor de satélite
TM-8000 HD
Lee a continuación 📖 el manual en español para Technomate TM-8000 HD (37 páginas) en la categoría receptor de satélite. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/37
1
1. INTRODUCTION
Overview…………………………………………………………………………..………………...……... 2
Main Features……………………………………………………………………………... ...………... ....4
2. EASY INSTALLATION GUIDE...…………...…………...…………...…………...……….. .. 3
3. SAFETY Instructions.………………………………………………………………………… …6
4. CHECK POINTS BEFORE USE……………………………………………………………… 7
Accessories
Satellite Dish
5. CONTROLS/FUNCTIONS……………………………………………………………………….8
Front/Rear panel
Remote controller
Front Display
6. EQUIPMENT CONNECTION……………………………………………………………....… 11
CONNECTION WITH ANTENNA / TV SET / A/V SYSTEM
7. OPERATION…………………………………………………………………….………………….. 12
Getting Started
System Settings
Edit Channels
EPG
CAM(COMMON INTERFACE MODULE) Only
CAS(CONDITIONAL ACCESS SYSTEM)
USB Menu
PVR Menu
8. Explain how to download S/W by USB and how to upload and download
channels by USB……………………….……………………………………….…………………31
9. HOW TO DOWNLOAD SOFTWARE FROM PC TO RECEIVER…………….…32
10. Trouble Shooting……………………….……………………………………….………………34
11. Specifications…………………………………………………………………….……………….35
12. Glossary of Terms……………………………………………………………….……………...37
2
INTRODUCTION
OVERVIEW
This combo receiver is designed for using both free-to-air and encrypted channel reception.
Enjoy the rich choice of more than 20,000 different channels, broadcasting a large range of culture,
sports, cinema, news, events, etc. This receiver is a technical masterpiece, assembled with the
highest qualified electronic parts.
MAIN FEATURES
• High Definition Tuners : DVB-S/DVB-S2 Satellite & DVB-T Terrestrial Compliant
• DVB-S/DVB-S2 Satellite Compliant(MPEG-II/MPEG-IV/H.264)
• Output resolution : 1080i & 720p & 576p & 576i & 480i
• 2 Smart Card Reader & 2 Common Interfaces(2 CI)
• HDMI & Component Output(YPbPr) with Upscaler to Improve Picture Quality
• Over 20,000 TV & Radio Channels
• PVR Ready via SATA or Internal /external HDD or USB Flash Drive(memory stick) with time-shift
Record & Playback functions
• MP3 Player and JPEG viewer via SATA or Internal/external HDD or USB Flash drive
• Front/Rear USB 2.0 USB flash memory drive(memory stick) selection through menu
• Software & Channel list download via USB 2.0
• Fully Featured VFD text Front Display
• Support 4:2:0
• Less than 1 second channel change
• Sensitive Tuner
• DiSEqC 1.0, 1.1, 1.2, 1.3(USALS) Compatible
• Dolby Digital Optical S/PDIF
• Auto Navigation system select as many satellites as you want to search
• On-screen display with full color resolution.
• Channel control by favorites, Lock, Skip, Move & Delete
• Enhanced 16 Favorite channel groups
• Channel sort by : All, Alphabet, Transponder & CAS
• Multilingual OSD Menu
• Extended EPG and program reservation on EPG
• Teletext & Subtitle by OSD and VBI
• Last channel memory function
• Factory default channel list
• Software & channel list upgrade via RS-232C: PC to STB, STB to PC, STB to STB
• Parental , Installation & Receiver Lock
• User save default channels & restore default channels
• Zoom function on Pause & Live channel
• Multipicture display
• Enhanced 16 Timers with one time, every day, every week :
Sleep, Wake up, Duration, PVR Record
• Support two SCART for TV & VCR & Mode Control : RGB, CVBS
• Support Recall function & Multipicture display
• Support for multiple language broadcasts
• SCPC & MCPC receivable from C/Ku band satellites LNBs supported :
Universal, Single, Single - S & C band wideband LNBs
• 90-240V AC 50/60Hz
• LNB Short Circuit protection onboard
• Support TV Type(4:3/16:9)
• Screen Mode(Full Frame/Letter Box/Pan & Scan/Pilar Box/CCO)
• e-SATA(External SATA Interface, 7200RPM support only)
• LAN 10Base-T/100Base-Tx Ethernet
• Support two RCU & Blind Search function
3
EASY INSTALLATION GUIDE
Part 1 Using the Preinstalled Satellite & Channel list
This receiver is preinstalled with Satellites and default Channels and is fully configured.
No settings need to be changed.
After turning ON the receiver, select a language. Go to system setting and Factory Reset Menu.
If you select Restore default channels, You can use preinstalled default channel list.
How to add/delete Satellites
Press the MENU button on the remote and go to Installation.
Press OK on the Installation setup. Press OK again and a Satellite List will appear.
To add satellites, press the YELLOW( ) button on the remote.
To delete satellites, Press the BLUE( ) button on the remote.
How to setup a DiSEqC 1.3 USALS System
Press the MENU button on the remote. Press OK on Installation. Go to Motorized setup and press
OK.
Go to the Third line(DiSEqC Motor) and use the Left/Right arrow buttons on the remote to select
USALS. Then go to Position Setting and press OK. Then go to Longitude and Latitude and enter
the coordinates of where you live (London’s Longitude is 00.1 West and South of UK’s Latitude is
51.5 North). Press the EXIT button on the remote. Go to GOTO and press OK. Wait until the Signal
Quality is more than 40% in the progress bar. When a satellite is found, then all the selected
satellites are fully configured for a Motorized system.
If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to be
adjusted.
For example : 00.2, 00.3, 00.4, 5/6/7/8/9 West or East. The Latitude may also need to be adjusted.
If you still have not got a signal, then the external installation (dish, etc) needs to be adjusted.
How to setup DiSEqC 1.2 Motorized System
Press the MENU button on the remote and go to Installation and press OK. Go to Motorized setup
and press OK. Press OK again to open the satellite list. Select a satellite from the list and press OK.
Go to the Third line(DiSEqC Motor) and use the Left/Right buttons on the remote to select
DiSEqC1.2. Go to Move and press and hold the Left/Right buttons on the remote until you get a
Signal Quality of more than 40%. Go to Command Type and use the Left/Right buttons to select
Save Position.
Then press OK to save. Press the RED( ) button on the remote to scan.
To scan extra satellites, repeat the above.
Part 2 New Installation from start (No Satellites/Channels)
How to do a Factory Reset to Delete the Preinstalled Satellites and Channels
If you want to start the receiver without the preinstalled Satellites and Channels, press the MENU
button on the remote and go to System setting and press the OK button. Go to Factory Reset,
Press OK and enter 0000. Then select Factory Reset and select YES.
Especificaciones del producto
| Marca: | Technomate |
| Categoría: | receptor de satélite |
| Modelo: | TM-8000 HD |
¿Necesitas ayuda?
Si necesitas ayuda con Technomate TM-8000 HD haz una pregunta a continuación y otros usuarios te responderán
receptor de satélite Technomate Manuales
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
receptor de satélite Manuales
- receptor de satélite Samsung
- receptor de satélite Grundig
- receptor de satélite Nokia
- receptor de satélite Strong
- receptor de satélite Thomson
- receptor de satélite Trekstor
- receptor de satélite Megasat
- receptor de satélite Manhattan
- receptor de satélite Telestar
- receptor de satélite Kathrein
- receptor de satélite Denson
- receptor de satélite Topfield
- receptor de satélite Maxview
- receptor de satélite Zgemma
- receptor de satélite Zehnder
- receptor de satélite Metronic
- receptor de satélite Pure Acoustics
- receptor de satélite Humax
- receptor de satélite Max
- receptor de satélite Homecast
- receptor de satélite Globo
- receptor de satélite Smart
- receptor de satélite Aston
- receptor de satélite Edision
- receptor de satélite Xoro
- receptor de satélite Maximum
- receptor de satélite SAB
- receptor de satélite Reflexion
- receptor de satélite M7
- receptor de satélite Rebox
- receptor de satélite Schwaiger
- receptor de satélite Boca
- receptor de satélite Inverto
- receptor de satélite Triax
- receptor de satélite Palcom
- receptor de satélite TechnoTrend
- receptor de satélite ALLvision
- receptor de satélite HD PLUS
- receptor de satélite Travelsat
- receptor de satélite SetOne
- receptor de satélite Oyster
- receptor de satélite Micro Electronic
- receptor de satélite Axing
- receptor de satélite I-Set
Últimos receptor de satélite Manuales
22 Octubre 2024
20 Octubre 2024
4 Octubre 2024
29 Septiembre 2024
27 Septiembre 2024
22 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
15 Septiembre 2024
14 Septiembre 2024