Tenda HG15 Manual de Usario

Tenda punto de acceso HG15

Lee a continuación 📖 el manual en español para Tenda HG15 (11 páginas) en la categoría punto de acceso. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/11

Quick Installation Guide

HG15

Package contents

 XPON ONT x 1

 Power adapter x 1

 Ethernet cable x 1

 User manual x 1

Please read this user guide before you start with the quick setup upon the first use.

This guide instructs how to install and connect the device. For more information such as the description of symbols displayed

on relevant materials, please visit www.tendacn.com.

Get to know the ONT

LED indicators

LED indicator

Color

Status

Description

PWR

Green

Solid on

The ONT is powered on properly.

Off

The ONT is powered off or not powered on properly.

PON

Green

Solid on

The ONT is registered successfully.

Blinking

The registration is not completed (unregistered or registering).

Off

The received optical power is lower than the optical receiver sensitivity, or no

fiber cord is connected.

LOS

Red

Blinking

The received optical power is lower than the optical receiver sensitivity, or no

fiber cord is connected.

Off

The received optical power is within the optical receiver sensitivity.

LAN

Green

Solid on

The LAN port is connected properly, but no data is being transmitted over the

corresponding port.

Blinking

The LAN port is connected properly, and data is being transmitted over the

corresponding port.

Off

No Ethernet device is connected or the Ethernet device is not connected to the

LAN port properly.

WLAN

Green

Solid on

The Wi-Fi network is enabled.

Blinking

The WPS is negotiating.

Off

The Wi-Fi network is disabled.

TEL

Green

Solid on

The ONT is registered with IMS, but no data is being transmitted.

Blinking

The ONT is registered with IMS, and data is being transmitted.

Off

The ONT is not registered with IMS.

Ports & Buttons

Port/Button

Description

PON

Optical fiber port.

You can find it on the bottom of the ONT, which is used to connect to a fiber cord.

PWR

Power jack.

U d to connect the ONT to a power source using the included power adapter.se

TEL

Telephone port.

Used to connect to a telephone for voice service using a telephone cable, which needs to

be prepared by yourself.

LAN1/2

Gigabit LAN ports.

Used to connect to such devices as routers, switches, computers or IPTV set-top boxes.

WPS/RST

WPS/Reset button.

 WPS: - -enabled devices can connect to the Wi-Fi networks of the ONT without Wi Fi

entering the password through WPS negotiation.

Press the button for about 1 second to start the WPS negotiation process of the ONT.

The LED indicator blinks quickly. Within 2 minutes, enable the WPS function to WLAN

establish a WPS connection on a WPS-supported device.

 Reset: Restore the ONT to the configurations preset by the ISP restore the ONT to or

factory settings.

 To restore the ONT to the configurations preset by the ISP: After the ONT

completes startup, press the button for 10 60 seconds and release it. All LED to

indicators will light off in a few seconds. When the LED indicator lights solid on PWR

again, the ONT is restored to the configurations preset by the ISP.

 To restore the ONT to factory settings: After the ONT completes startup, press

the button for more than minute and release it. All LED indicators will light off in a 1

few seconds. When the LED indicator lights solid on again, the ONT is restored to PWR

the factory settings.

This ONT supports wall mounting (two mounting holes on the bottom). The recommended parts are as follows:

- Expansion bolt: PA6*26.4mm; inner diameter: φ2.4

- Screw: Quantity: 2; Diameter: 2.5-4.0mm; head diameter: 5.0-6.5mm.

Especificaciones del producto

Marca:	Tenda
Categoría:	punto de acceso
Modelo:	HG15
Consumo de energía (HDR) por 1000 horas:	- kWu
Clase de eficiencia energética (SDR):	E
Consumo de energía (DEG) por 1000 horas:	15 kWu
Escala de eficiencia energética:	A tot G