TK Audio M/S Station Manual de Usario

TK Audio No categorizado M/S Station

Lee a continuación 📖 el manual en español para TK Audio M/S Station (5 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/5
M/S Staon
Advanced M/S tool
www.tkaudio.se
The M/S Staon is a new mastering and main bus tool with four separate funcons divided into two sec-
ons including an advanced cue funcon.
Secon 1 is a parallel insert with M/S funcon allowing the user to use separate blend controls for the mid
and side signals. For maximum precision the blend control(s) has 16 posions from dry to wet.
Secon 2 consists of three parts, an ellipcal EQ with 16 frequencies, a width control from 0-200% and an
advanced cue funcon.
The two secons are normally linked internally but can be used separately with their own balanced inputs
and outputs by removing four jumpers inside the unit (see unlink secon 1 and 2). This way you can use
them at dierent locaons in your setup.
Parallel insert with M/S funcon:
With the insert secon you can insert an external
processor like an EQ, compressor, distoron unit
etc, and then dial in a mix between the processed
signal (wet) and the unprocessed signal (dry).
For maximum precision the blend control has 16
steps from dry to wet.
If you acvate the M/S funcon your signal will
be coded into mid ( L+R ) and side ( L-R ). The mid
signal normally contains all the center info such
as bass, kick drum, lead vocal etc and the side
signal contains all the panned parts of the signal.
In M/S you can process the mid signal and side
signal separately with dierent types of proces-
sors and the blend controls is placed infront of
the M/S encoder before it’ decoded back to le
and right signals.
With the blend split funcon you get separate
blend controls for the mid and side signal.
Ellipcal Equalizer:
With the ellipcal EQ all frequencies below a
selected frequency will be made to mono. This
funcon can make your low end more focused.
It’s an old technique used when mastering for
vinyl.
Too much low end in the side channel (vercal)
can make the needle bounce slightly and cause
distoron.
By using a 12dB high pass lter in the side chan-
nel you set the frequency under which the signal
will be processed as mono. As a HPF introduces
phase shi to the signal, a phase correcon
is added to the mid channel keeping channel
separaon as good as possible. The EEQ has 16
frequencies from 36Hz to 302Hz.
With the EEQ cue funcon you can monitor the
signals that are mixed between the channels.
www.tkaudio.se
Stereo width control:
By adjusng the amount of side informaon in
the stereo mix, the width can be adjusted in-
crementally from mono to extra wide. With this
control you can ne adjust the stereo image aer
you have used the M/S insert and EEQ.
Cue funcon:
When powered on the Stereo cue is auto selec-
ted as this is the normal operaon stage.
With the cue funcon you can monitor the Le,
Right, Mid or Side signal separately by pressing
the dedicated buon.
When you run the parallel insert in M/S and
Blend Split is acvated ”Insert cue” is a dedicated
funcon to monitor the Mid or Side blend sepa-
rately. The signal is then sent to the cue secon
without passing the EEQ, width circuit or other
gear if the M/S Staon is used unlinked.
With Insert cue acvated the L or R cue buon
will act as Mid or Side cue buons. By pressing
the L cue buon you will monitor the Mid blend
and by pressing the R cue buon you will monitor
the Side blend.
The ”Insert cue” funcon can be used even if
you run the two secons separately at dierent
locaons in your chain.
You can NOT use the ”Insert cue” funcon to
monitor the insert blend in stereo. This funcon
is dedicated to monitor the Mid or Side signals in
M/S mode with split blends only!
If you select the EEQ buon on the cue secon
you can monitor the low frequencies fed from
le to right or right to le by pressing L or R cue
switch. Perfect for ne tuning of the EEQ seng.
www.tkaudio.se

Especificaciones del producto

Marca: TK Audio
Categoría: No categorizado
Modelo: M/S Station

¿Necesitas ayuda?

Si necesitas ayuda con TK Audio M/S Station haz una pregunta a continuación y otros usuarios te responderán


No categorizado TK Audio Manuales

TK Audio

TK Audio Transceiver 2 Manual de Usario

18 Septiembre 2024
TK Audio

TK Audio T-Komp Manual de Usario

15 Septiembre 2024
TK Audio

TK Audio TK-lizer 2 Manual de Usario

15 Septiembre 2024
TK Audio

TK Audio TK-lizer 500 Manual de Usario

9 Septiembre 2024
TK Audio

TK Audio M/S Station Manual de Usario

9 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024